Windows and Linux System Update Package (SFUP) Installation and Operation Instructions

Intel highly recommends reading this document in its entirety before performing the system update.
Verifying that your system meets the documented requirements will ensure a successful update and 
provide the most reliable system functionality after the update has completed.

 
Released - 04 April 2023

********************************************************************************
This update package includes the following production-signed package/SW versions and update utility version:

    System BIOS    -SE5C741.86B.01.01.0004
    ME Firmware    -06.00.04.0033
    BMC Firmware   -1.53
    FRU            -0.07
    CPLD           -v4p0

    sysfwupdt  - Version 16.0.8

********************************************************************************
    IMPORTANT NOTES
********************************************************************************

!! Firmware check is not applicable,  hence updates will be triggered even when 
   the versions in the system and in the SFUP package are same !!

!! Do NOT interrupt or reboot or remove power from your system during the update process.
   Doing so may render your system inoperable. !!

!! Do NOT attempt to down rev the system software once loaded on to the system.
   Doing so may render your system inoperable. !!

!! All updates provided in this package are installed using the windows
   and Linux operating environment only. !!

!! Do not modify any of the script files. The scripts as written will provide 
   the most reliable update experience. !!
   
!! Refer to the userguide which is available in sysfwupdt folder for any update sceanrios 
   or sysfwupdt commands. !!

!! ITK ".cap" file need to be customized else ".cap file" update will fail !!

********************************************************************************
    SUPPORTED PRODUCTS
********************************************************************************

Intel(R) Server Board D50DNP Family.

********************************************************************************
    SFUP CONTENTS
********************************************************************************

Windows*: startup.bat and sysfwupdt\Win_x64 directory which contains sysfwupdt
          executable for Windows 64 bit OS.
Linux*  : startup.sh and sysfwupdt\Linux_x64 directory which contains
          installable .rpm for RHEL, SLES and UBUNTU
UPDATE  : bios_cap_update.bat, bios_cap_update.sh, bios_update.bat, bios_update.sh,
	  bmc_update.bat, bmc_update.sh, cpld_update.bat, cpld_update.sh,
	  dimms_update.bat, dimms_update.sh, driver_install.bat, driver_uninstall.bat,
	  frusdr_update.bat, frusdr_update.sh, startup.bat, startup.sh,
	  sysfwupdt_install.sh, sysfwupdt_uninstall.sh
BIOS	: R01.01.0004_DenaliPass_EBG_SPR_UpdateCapsule_prd.bin
BMC	: dnp-signed-OBMC-egs-1.53-3-g2a59e1-c2bd0000-pfr-oob.bin
CPLD	: pfr_dnp_10m50_cfm1_auto_v4p0_prd.bin
ME      : NA
FD      : NA
DIMM	: fw_cwvb0_3.2.0.2776_rel.bin
FRU	: D50DNP1SBB.fru, D50DNP1SB.fru, D50DNP1SBS.fru
OtherFRU: NA
SDR 	: NA
CFG 	: fru_update_noprompt.cfg, master.cfg
PDF     : NA

********************************************************************************
    SYSTEM SOFTWARE REQUIREMENTS
********************************************************************************

To update the system software stack to the versions included in this update package,
the system software stack currently installed on the target server system MUST meet 
the following, or else the update may fail:
 
the currently loaded system firmware stack on the system must meet the following:
  
 - System BIOS   - production version  R01.01.0001 or later
 - BMC Firmware  - production version  1.13 or later
 - CPLD          - production version  V2P2 or later

********************************************************************************
    IMPORTANT INFORMATION FOR THE UPDATE PROCEDURE
********************************************************************************

- Windows : When startup.bat is executed from SFUP, the update order is CPLD, 
            BMC, FRU and BIOS followed by a system reset.
- Linux :   When "./startup.sh" is executed from SFUP, it uninstalls 
	    existing sysfwupdt (if any) and installs latest sysfwupdt from SFUP.
	    The update order is CPLD, BMC, FRU and BIOS followed by a system reset.

********************************************************************************
    GENERAL INSTALLATION PROCEDURE
********************************************************************************

1. Unzip the contents of the SFUP package to any directory.
2. Windows : from SFUP directory open a command prompt or powershell and execute
	     startup.bat
3. Linux  :  from SFUP directory open a terminal and execute "./startup.sh"

------------------------------------------------------------------------------

Please refer to the respective "Release Notes" files for complete list of known issues,
work arounds and detailed requirements: 

- BMC_TXT      : ReleaseNotesBMC_1.53.txt
- FRUSDR_TXT   : ReleaseNotesFRU_0.07.txt
- BIOS_TXT     : ReleaseNotesBIOS_R01.01.0004_SPR_prd.txt
- CPLD_TXT     : ReleaseNotesCPLD_4.0.txt