;**************************************************************************** ;**************************************************************************** ;** ** ;** (C) Copyright 1987-2022, Intel COMPUTER CORP. ** ;** ** ;** https://www.Intel.com ** ;** ** ;**************************************************************************** ;**************************************************************************** ============================================================================= Northpass Server Platform BMC Firmware Release Note ============================================================================= Version: 00.27.0D02 Release Date: 01/13/2023 To: Northpass Platform ----------------------------------------------------------------------------- Platforms Affected ----------------------------------------------------------------------------- * Northpass01 * Northpass02 * Northpass03 * Northpass05 * Northpass06 * Northpass07 * Northpass08 * Northpass09 ----------------------------------------------------------------------------- About This Release Package ----------------------------------------------------------------------------- Firmware Image: 00.27.0D02.bin, 00.27.0D02_enc.bin Checksum: 0xcfef59a5 (checksum 32) Checksum: eafc0aac4d4b1facff81391b944421312ac044d0(SHA-1) ----------------------------------------------------------------------------- Firmiware Dependency ----------------------------------------------------------------------------- BIOS: SE5C620.86B.0018.D01 ----------------------------------------------------------------------------- Important Installation Notes ----------------------------------------------------------------------------- The following update process must be followed to ensure a trouble free updating of your baseboard. The order is important to minimize any issues for status checking as different components are initialized. 1. BIOS/ME firmware 2. BMC firmware ----------------------------------------------------------------------------- KVM JAVA certificate expiring time ----------------------------------------------------------------------------- Start from Fri Apr 16 23:40:38 CST 2021 End to Mon Apr 14 23:40:38 CST 2031 ----------------------------------------------------------------------------- Installation Procedure ----------------------------------------------------------------------------- There is one way to update the BMC firmware. You may optionally to use the Web UI Web GUI Update 1. Unzip the package onto your system 2. Log into the BMC web UI 3. Navigate to Maintenance, then Firmware Update 4. Click brower, and direct the browser to the location of firmware image 5. Click "Start Update". Progress and status will be shown as the update progress. *Notes: 1. BMC firmware lower than 00.08, please update firmware by offline. 2. BMC firmware is 00.08 or later, please update firmware with 00.08.xxxx_enc.bin by EWS or sysfwupdt.efi. with UpdateNvram 3. Due to sign key change from v0.12 to v0.14, you need to update firmware one version one time. for example: 0.12->0.13->0.14, and for 0.13 can not N to N udpate. ----------------------------------------------------------------------------- Change History ----------------------------------------------------------------------------- Version 0.27.0D02 [MiTAC][NTP] CPU1_VR_Hot status is ok when CPU1 is not present. Version 0.27.0D01 Security patch merge: VU#507384.1 - AMI_MegaRAC_SPx_qDecoder_Remote_Code_Execution VU#507384.2 - AMI_MegaRAC_SPx_Arbitrary_Code_via_Redfish_API VU#507384.3 - AMI_MegaRAC_SPx_Password_Reset_interception VU#507384.4 - AMI_MegaRAC_SPx_Default_UID VU#507384.5 - AMI_MegaRAC_SPx_User_enumeration_via_API Version 0.26.0D01 2103649807 [MiTAC][NTP] Complex password can’t include “Space” character or it will fail to be saved from EWS. (corner case) 2103651942 [MiTAC][NTP]HDD Sensor is not available if update BMC by EWS. (Regression issue) -WAD by AMI. And futher SDR update required and will note in next release note. "No firmware code change". 2103652629 [MiTAC][NTP]HDD sensor remain “Normal” status during Drive Precenc/Rebuild (Reading 0x8001/0x8083). 2103652729 [MiTAC][NTP]System status LED is not resumed back to Normal (solid green) after de-asserted the Drive Fault/Rebuilding from blinking green state. Version 0.25.0D03 2103651769 [MiTAC][NTP]System shutdown unexpectedly. (Regression issue) Version 0.25.0D02 2103651766 [MiTAC][NTP]Fan boost in system idle mode. (Regression issue) 2103651769 [MiTAC][NTP]System shutdown unexpectedly. (Regression issue) Version 0.25.0D01 Fixed UART1 loopback test failed. Default loging attempt set to 3 times. Bug Fix: 2103650060 [MiTAC][NTP]There is no UNR (Upper Non Recoverable) sensor threshold design on NTP. 2103649099 [MiTAC][NTP] BMC won’t clear the “boot flags valid bit” automatically if system reset (power cycle) is triggered by non-System Control command. 2103648614 [MiTAC][NTP]Once trigger”uncorrectable ecc-Memory Error” fatal error of DIMM, system status LED of FP is turn to blinking amber, it should be solid amber. 2103647475 [MiTAC][NTP]LAN Failover is not working properly, fail to set NIC1 as primary interface and confused outcome by set NIC3 (OCP) as primary interface. 2103643310 [MiTAC][NTP]No HDD status sensor to monitor the health of Hard drive. 2103649595 [MiTAC][NTP] PATCH setting for IPv6 successfully (ex: IPv6, Dynamic to Static), the settings of IPv4 we used to set will be all clean (or you may say restored back) to default value. 2103649807 [MiTAC][NTP] Complex password can’t include “Space” character or it will fail to be saved from EWS. (corner case) Version 0.24.0D01 * [INTEL][NTP] upgrade psu version to PSSF132202A_03_26.5.128_20211123. Version 0.24 * [INTEL][NTP] High severity CVE issue FIX Version 0.23 * Update to AMI WW7.5 released. * Update PCH temp UC/UNC * Fix watchdog severity to fit Intel platform. Bug Fix: - From Tyan side: 2103648415 [MiTAC][NTP](PVL) After Stop PSU FAN , System status LED is Amber blinking for 2 sec then green on. 2103647791 [MiTAC][NTP](PVL) AC/DC cycle got one event about Temperature P0/P1 Abs Temp Upper Non-critical going high 2103648614 [MiTAC][NTP]Once trigger”uncorrectable ecc-Memory Error” fatal error of DIMM, system status LED of FP is turn to blinking amber, it should be solid amber. - From AMI side: 2103648739 [MiTAC][NTP]After SUT reset, the current boot codes of N cycle is not fully duplicated to previous codes of N+1 cycle. 2103648734 [MiTAC][NTP]Fail to enable DHCP of IPv4 via Redfish “PATCH”. 2103644965 EIP 662564 [MiTAC][NTP]After close SOL session from remote console, COM0 Console Redirection will turn to "Port Is Disabled" state. Version 0.22 * Update to AMI WW5.1 released. * Update 1U fan table for NVME sensor. * Update copyright in KVM help menu to 2022 * Supported HSBP CPLD Firmware update only available with CPLD v0167 or after on platform. Bug Fix: - From Tyan side: 2103647942 [MiTAC][NTP2U]”NVMe Thrm Mgn” sensor would became Unknown Healthy if there is SATA drive attached on whether 1st or 2nd HSBP. 2103647791 [MiTAC][NTP](PVL) AC/DC cycle got one event about Temperature P0/P1 Abs Temp Upper Non-critical going high 2103648577 [MiTAC][NTP](PVL) AC/DC cycle got one event about Temperature Riser L Temp Upper Non-critical going high [MiTAC][NTP] SMBAlert# signal keeps low and will not return to high level when the AC power cord is unplugged from each of PSUs. - From AMI side: 2103647483 EIP 656079 [MiTAC][NTP]”Current Post Code” is changed after SUT boot into efi shell. (regression isse) 2103643764 EIP 636374 [MiTAC][NTP1U]HSBP FW online update via BMC (as satelite fw) is NOT ready. 2103645004 EIP 655663 [MiTAC][NTP]OOB update BIOS Configuration of EWS is not working, the changed Variable value for BIOS Variable does not reflect to actual BIOS on next reboot, no SEL asserted either. OCP related partial Fixe: 2103647621 EIP 656328 [MiTAC][NTP]SOL Session of OCP BMC IP (Channel-3) closed unexpectedly after SUT reset. (Issue behind 2103643259) 2103647492 EIP 656084 [MiTAC][NTP]Unable to modify eth1 settings of “EthernetInterfaces” (OCP channel-3) via Redfish. (Regression issue behind 2103644481) 2103647475 EIP 656075 [MiTAC][NTP]LAN Failover is not working properly, fail to set NIC1 as primary interface and confused outcome by set NIC3 (OCP) as primary interface. 2103647418 EIP 656071 [MiTAC][NTP]Ping fail to OCP channel-3 IP after AC cycle. (Tested with XXV710 DA2) 2103643259 EIP 632982 [MiTAC][NTP1U]Ping BMC IP of shared LAN (OCP 2.0) fail under efi shell. Version 0.21 * Update to AMI WW1.3 released. * Update fan table for sku 5/6 * AMI has removed the redfish default user account "Administrator" * Fix corner case was not covered to fulfill "new password should have at least two-character change then previous password" case. * BUG Fix: - From Tyan side: 2103643778 [MiTAC][NTP1U]DIMM Error LED remain off after uncorrectable ecc-Memory Error is injected. 2103646951 [MiTAC][NTP2U]Lack of LED State definition for System State “AC on/DC off/S5”. 2103647598 [MiTAC][NTP1U](PVL) Reboot got "Temperature NVMe Thrm Mgn" going high events (Regression) 2103647624 [MiTAC][NTP]” System status LED of FP does NOT resume back to Normal (solid green) after de-asserted the failure from blinking green/amber state. (Regression issue) 2103647731 [MiTAC][NTP]The system status LED of FP is OFF in S5 state. 2103647785 [MiTAC][NTP2U] AC test and got Voltage PVCCIO_CPU0/1 | "Lower" Critical going low event 2103647804 [INTEL][NTP]The system LED would be blinking green when the PSU occurs over current or over temperature event. 2103646973 [MiTAC][NTP](PVL) AC test and got "Voltage PVCCIO_CPU0 | Upper Critical going high" event. (Regression) occurred again. 2103647785 [MiTAC][NTP]Voltage PVCCIO_CPU01 Lower Critical going low 2103646959 [MitTAC][NTP](PVL) Reboot test got "Temperature PSU1_Temp " , "Other PSU1_Pout" upper critical going high event (Regression) 2103647951 [MiTAC][NTP1U](PVL) system idle and got Voltage VCC3 Lower critical going low event 2103647955 [MiTAC][NTP1U](PVL) DC and got " Voltage PVCCIO_CPU1 /CPU0| "Upper" Critical going high"(once) - From AMI side: 2103647475 [MiTAC][NTP]LAN Failover is not working properly, fail to set NIC1 as primary interface and confused outcome by set NIC3 (OCP) as primary interface. 2103647159 [MiTAC][NTP]Incorrect spelling of “Cursor” in function “Add Macro” of iKVM Over Html5. (Corner issue) 2103647260 [MiTAC][NTP]Full of 0x00 post code in “BIOS POST Code” section of System Debug Log. (Regression issue). 2103647629 [MiTAC][NTP]EWS login fail intermittently. (Regression issue) 2103647475 [MiTAC][NTP]LAN Failover is not working properly, fail to set NIC1 as primary interface and confused outcome by set NIC3 (OCP) as primary interface. 2103647492 [MiTAC][NTP]Unable to modify eth1 settings of “EthernetInterfaces” (OCP channel-3) via Redfish. (Regression issue behind 2103644481) 2103647621 [MiTAC][NTP]SOL Session of OCP BMC IP (Channel-3) closed unexpectedly after SUT reset. (Issue behind 2103643259) Version 0.20 * Update to AMI WW52.1 released. * Change FP LED GPIO to meet chenbro definition. * Remove default account.(user need to create account under BIOS setup menu. * BUG Fix: 2103641038 EIP 623168 [MiTAC][NTP1U]Health LED of EWS virtual panel is always in solid on state after power on SUT. 2103642259 EIP 626949 [MiTAC][MB]The Chinese localization of EWS is NOT completed. 2103642356 [MiTAC][MB]ERR2 Timeout Monitoring feature does not exist 2103642950 [MiTAC][NTP]Overall System Health of EWS System Information Summary is presented abnormally. 2103646973 [MiTAC][NTP](PVL) AC test and got "Voltage PVCCIO_CPU0 | Upper Critical going high" event. (Regression) 2103647132 [MiTAC][NTP]LED State of system status for “Battery failure” is behaved incorrectly as “Blinking amber”. 2103647219 [MiTAC][NTP]Unable to see BMC backup fw version on EWS with Operator/User privilege account. (Corner issue) 2103647258 [MiTAC][NTP]Unable to add new node manager policy with policy ID greater than 16. (Corner issue) 2103647259 [MiTAC][NTP]The Language field of PSU FRU info on EWS is abnormal. (1U:blank/2U:Undefined) 2103647263 [MiTAC][NTP1U]System Status LED of Virtual Front Panel on EWS is blinking green in SUT normal state.(Regression issue of 2103641038). Version 0.19 * Update to AMI WW50.2 released. * Update 1U thermal table * Support NVME temperture reading * BUG Fix: 2103644824 EIP 641860 [MiTAC][NTP1U] Duplicate sensor “CPU1_VR_Hot, PSU1_Status” are presented in BMC Sensor Readings of SystemDebugLog. arjun 2103643832 EIP 636383 [MiTAC][NTP1U]The reading value of Entire Platform on Power Statistics page of EWS is abnormal in SUT DC off state. Done 2103644842 [MiTAC][NTP1U] SOL console has no display after launch it from EWS Remote Control page. 2103646227 EIP 649565 [MiTAC][NTP1U](PVL)Nessus scan got two Medium error. 2103646533 [MiTAC](NTP1U)(PVL) Reboot test got Timestamp Clock Sync and "Other PSU2_Pin" Upper Non-Critical going high event. 2103646536 [MiTAC][NTP2U](PVL) Windows Reboot test got Temp HSBP 2 Temp Upper Critical going high event. Version 0.18 * Update to AMI WW48.5 released. * Update 2U thermal table * BUG Fix: 2103644974 [MiTAC][NTP]Remote SOL SSH Connection will be closed automatically after SUT reboot cycle. => sol timeout 600sec 2103644022 [MiTAC][NTP1U]Few PSU related sensor shave NA threshold value for UNC and UC. 2103646494 [MiTAC][NTP]Sensor readings and threshold values of “P0 DTS Temp” which dump by ipmitool are not reflect to EWS. 2103643103 [MiTAC][NTP1U] System status LED of FP is always OFF. Version 0.17 * Update to AMI WW48.2 released. * Update sensor offset to thermal control * BUG Fix: 2103643781 [MiTAC][NTP1U] There are unexpected events after reset BMC . ( also without expected SEL). 2103646471 [MiTAC][NTP2U]The sensor status of FAN2 is not stable in SUT idle state, it turns to "not available" imtermittently. Version 0.16 * Update to AMI WW47.2 released. * Update FSC * BUG Fix: Correct SDR for SKU9 Version 0.15 * Update to AMI WW46.5 released. * Support SKU 9 * BUG Fix: 2103645684 [MiTAC][NTP2U]SYS_FAN_1 and SYS_FAN_2 with no reading and status is NOT available. 2103643221 [MiTAC][NTP1U] The system will reboot when 12V OCP event occurs in PSU. 2103643233 [MiTAC][NTP 1U]PSU related event log is not ready. 2103644971 [MiTAC][NTP2U]Unexpected PSU0_Fan Critical event is triggered after remove all SYSFAN. Version 0.14 * Update to AMI WW43.4 released. * Support PCH temp * Update thermal table V0.02 * Update new par of sign key. * BUG Fix: 2103644969 [MiTAC][NTP2U] SYS_FAN_5 and SYS_FAN_6 are in Critical status with 0 rpm reading. 2103644124 [MiTAC][NTP1U] Even only install one DIMM in slot “P0 MC0 DIM CH A0”, all four DIMM Thrm Mgn 1-4 are always shown as “-85 deg_c” sensor reading. (bmc 00.09.1702) 2103644709 [MiTAC][NTP1U] Unknown sensor name and description of version change event. 2103643846 [MiTAC][NTP1U] Unknown sensor name and unknown wording of description in pef action alert event. 2103645019 [MiTAC][NTP2U] Cold Redundancy feature of 2U NTP is not ready. 2103642960 [MiTAC][NTP]Chassis ID LED of Virtual Front Panel on EWS is turned on to solid blue but in actual fact it is off. 2103645684 [MiTAC][NTP2U]SYS_FAN_1 and SYS_FAN_2 with no reading and status is NOT available. 2103645745 [MiTAC][NTP]PS sensor names are not matched to ME defined PS silkscreen of chassis. 2103645742 [MiTAC][NTP]CR default order of standby PSU is set as PS0. 2103645485 [MiTAC][NTP]There are sensors with Critical/Unknown healthy in system idle. 2103644121 [MiTAC][NTP1U]PCH Temp reading is always in 0 degree C. (bmc 00.09.1702) 2103642932 [MiTAC][NTP] There are events with undefined sensor name asserted in SEL After online update BMC 007 with Sysfwupdt 15.0.3 under EFI Shell. Version 0.13 * Update to AMI WW43.4 released. * Update sensor upper critical. * Update public key. * BUG Fix: Version 0.12 * Update to AMI WW43.4 released. * Enable sensor offset * Disable EWS and lan channel as default * BUG Fix: 2103642932 [MiTAC][NTP] There are events with undefined sensor name asserted in SEL After online update BMC 007 with Sysfwupdt 15.0.3 under EFI Shell. 2103643677 [MiTAC][NTP1U]Unknown Sensor Name for sensor 00h “Timestamp_Sync” in SEL event when timestamp clock sync is triggered. 2103643781 [MiTAC][NTP1U]There are unexpected events after reset BMC . ( also without expected SEL). 2103643846 [MiTAC][NTP1U] Unknown sensor name and unknown wording of description in pef action alert event. 2103644081 [MiTAC][NTP1U](PVL)Got Timestamp Clock Sync event and event time is not listed in order when reboot/DC/AC test. 2103644124 [MiTAC][NTP1U]Even only install one DIMM in slot “P0 MC0 DIM CH A0”, all four DIMM Thrm Mgn 1-4 are always shown as “-85 deg_c” sensor reading. (bmc 00.09.1702) 2103644709 [MiTAC][NTP1U]Unknown sensor name and description of version change event. 2103644969 [MiTAC][NTP2U]SYS_FAN_5 and SYS_FAN_6 are in Critical status with 0 rpm reading. Version 0.11 * Update to AMI WW41.1 released. * Add lan_status sensor * Disable EWS and lan channel as default * BUG Fix: 2103643203 [MiTAC][NTP1U] PSU Cold redundancy function is not ready. 2103643670 [MiTAC][NTP1U]Active Directory is grey out with User privilege account. 2103641365 [MiTAC][MB]There is a processor error log generated that can be observed after injecting MCERR but no CATERR log. 2103644124 [MiTAC][NTP1U]Even only install one DIMM in slot “P0 MC0 DIM CH A0”, all four DIMM Thrm Mgn 1-4 are always shown as “-85 deg_c” sensor reading. 2103641094 [MiTAC][MB] BMC Self-Test is Fail. 2103644022 [MiTAC][NTP1U]Few PSU related sensor shave NA threshold value for UNC and UC. 2103641803 [MiTAC][MB] LAN leash lost Asserted/ Deasserted event is NOT triggered after hot-plugging LAN cable of LAN1. Version 0.10 * Update to AMI WW39.3 released. * Add lan_status sensor * Disable EWS and lan channel as default * BUG Fix: 2103642463 [MiTAC][MB] Without KCS Control Mode sensor on NTP. 2103643064 [MiTAC][NTP] Incorrect SEL is generated after upload software license with syscfg tool under efi Shell. 2103644126 [MiTAC][NTP1U][0007.D02,FanSpeedControl] Fan Speed Control under BIOS Setup menu cannot work normal. 2103643815 [MiTAC][NTP1U]Baseboard Serial Number is displayed incorrectly on EWS System Information. Version 0.09 * Update to AMI WW36.2 released. * Update sensors Version 0.08 * Update to AMI WW33.3 released. * Update RSA key * Disable PCH temperture reading * Enable dual image feature * Support recovery update. * BUG Fix: 2103642826 [MiTAC][MB] Unknown measure unit of CPU_DTS_Margin sensor. 2103641081 [MiTAC][MB] No timestamp of POST Codes in EWS System POST Codes, not provide show time selectable drop-down box. 2103642819 [MiTAC][MB] User will be logout automatically after change and save the value of Web Session Timeout of System Information Page on EWS. 16014287997 [Utilities] [Sysfwupdt_Build15.0.3_AllOS][NTP][Linux] (Intermitent) : BMC update fails with an error Version 0.07 * Update to AMI WW33.1 released. * Initial fan duty to 100 * Enable dual image feature * BUG Fix: 2103641123 [MiTAC][MB] Asserted the SMI signal more than 90 seconds won't cause system reset. 2103641320 [MiTAC][MB] Critical Event “Fru activation requested-IPMI Power Cycle/Reset-asserted” are observed when issue chassis control command (dc cycle/hard reset). 2103641361 [MiTAC][MB] No beep code happens when no processor on the board or processor installs in the wrong socket and trying to boot up 2103641047 [MiTAC][MB] No expected SEL after upload valid or invalid license key. 2103641970 [MiTAC][MB] Severity of event acpi power satat S5 (shutdown) is critical. 2103642030 [MiTAC][MB] Severity of event "hard reset-IPMI WATCHDOG-asserted" of SEL is set as "Warning" 2103642085 [MiTAC][MB] Severity of event "reset button pressed-Button Status-asserted" of SEL is set as “Critical”. 2103642136 [MiTAC][MB]BMC command for Fan PWM control doesn’t work 2103642261 [MiTAC][MB]There are “undefined” code descriptions in System POST Codes of EWS. 2103642282 [MiTAC][MB] Set the display size to 1024x768 on remote client, some function Tab of EWS on browser is overlap and not able to click. 2103642295 [MiTAC][MB] With Invalid user or incorrect PWD, Web ISO still able to Save and Mount successfully. 2103642448 [MiTAC][MB]Cannot create new user with simple password mode if username equal to password. 2103642451 [MiTAC][MB]Unclearly caution when you try to add new user with invalid PWD which not meet the pwd complexity requirement. 2103642457 [MiTAC][MB] Non-ADMIN BMC user is able to set KCS Policy with ipmitool remotely. Version 0.06 * Update to AMI WW32.1 released. * BUG Fix: 2103641020 [MiTAC][MB] Incorrect Cause is responded after reset SUT by pressing reset button. 2103641054 [MiTAC][MB] Few sensors of sensor support list (define in NTP_BMC_Function_Spec-v004) cannot be found. 2103641055 [MiTAC][MB] CPU info of EWS is not matched to BIOS. 2103641072 [MiTAC][MB] Virtual Front Panel of EWS is not completed. 2103641089 [MiTAC][MB] Platform Configuration in BIOS Configurations on EWS is blank. 2103641364 [MiTAC][MB] There is no RTC battery voltage low relative event in BMC system event log when system booting without RTC battery. 2103641502 [MiTAC][MB] After heat up the TSOD in S0, can't find relative thermal trip event of channel "G" of CPU1&2.And channel "F" of CPU1 has the same discovery. 2103641971 [MiTAC][MB] Duplicate event after issue graceful shutdown remotely. Version 0.05 * Update to AMI WW30.4 released. * BUG Fix: 2103641016 [MiTAC][MB] The actual value of “Device ID” and “IPMI Device Revision” are NOT match to Intel Whitley BMC Firmware EPS_Rev1_0 SPEC. 2103641031 [MiTAC][MB] Unable to boot into BMC firmware transfer mode. 2103641033 [MiTAC][MB] There are sensors reading and threshold with NA value, suppose the sensor porting is not completed yet. 2103641047 [MiTAC][MB] No expected SEL after upload valid or invalid license key. 2103641049 [MiTAC][MB] EWS Web browser icon is not shown with Intel logo. 2103641059 [MiTAC][MB] Help info of Current Users is not cover “Operations”. 2103641083 [MiTAC][MB] After try to sorting data by clicking the sequence of “Current”, “Average”, “Maximum” and “Minimum”, the Power Statistics table become abnormal. 2103641102 [MiTAC][MB] Unable to enable RMCP+ Cipher Suite3 for LAN via EWS successfully. 2103641297 [MiTAC][MB] Severity of event “log area reset-SEL Status-asserted” of SEL is set “Critical”. 2103641364 [MiTAC][MB] There is no RTC battery voltage low relative event in BMC system event log when system booting without RTC battery. 2103641708 [MiTAC][MB] Unexpected response Unknown (0x83) when try to modify User Name of User ID1(anonymous user). 2103642136 [MiTAC][MB] BMC command for Fan PWM control doesn’t work. Version 0.04 * Update to AMI WW27.2 released. * Support non-pfr update * BUG Fix: 2103641035 2103641036 2103641040 2103641046 2103641094 Version 0.03 * Enable SD server. * Enable EWS and lan channel as default. * Update to AMI WW26.3 released. * Update BIOS, SMI handler, ME event sensor. * Support update BMC FW by EWS with .bin file Version 0.02 * Fix afu update BIOS fail * Add product ID * Add manufacturer ID Version 0.01 * First official release. * Add AMI MS1 * Add AMI MS1.5 * Add AMI MS2 * Update tyan platform code ----------------------------------------------------------------------------- Known Issues/Workarounds/Requirements ----------------------------------------------------------------------------- 1. FSC oem command changed in v00.16. Please execute the command after DC/AC cycle to load correct fan table. performance ipmitool -I lanplus -H 'IP' -U admin -P admin raw 0x30 0x89 0xff 0x44 0x10 1 1 1 0x03 Acoustic ipmitool -I lanplus -H 'IP' -U admin -P admin raw 0x30 0x89 0xff 0x40 0x10 1 1 1 0x03 2022/05/19 2.Web update fw sometimes cause sdr threshold not update.