============================================================================= Intel(R) Server Platform S2600BP FRU/SDR Update Release Notes ============================================================================= INTEL(R) Server Boards and Systems Intel Corporation 2111 N.E. 25th Avenue, Hillsboro, OR 97124 USA ============================================================================= DATE: December 10, 2021 TO: Intel(R) Server Platform S2600BP customers SUBJECT: IBMC(R) FRU/SDR update package S2600BP_FRUSDR_148 release notes ============================================================================= LEGAL INFORMATION ============================================================================= Information in this document is provided in connection with Intel products. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document. Except as provided in Intel's Terms and Conditions of Sale for such products, Intel assumes no liability whatsoever, and Intel disclaims any express or implied warranty, relating to sale and/or use of Intel products including liability or warranties relating to fitness for a particular purpose, merchantability, or infringement of any patent, copyright or other intellectual property right. Intel Corporation may have patents or pending patent applications, trademarks, copyrights, or other intellectual property rights that relate to the presented subject matter. The furnishing of documents and other materials and information does not provide any license, express or implied, by estoppel or otherwise, to any such patents, trademarks, copyrights, or other intellectual property rights. Intel products are not intended for use in medical, life saving, or life sustaining applications. Intel may make changes to specifications and product descriptions at any time, without notice. Intel is a registered trademark of Intel Corporation. *Other names and brands are the property of their respective owners. Copyright (c) 2021 Intel Corporation. ============================================================================= ABOUT THIS RELEASE PACKAGE ============================================================================= SDR file version: 1.48 SDR data based on system/thermal team SDR spreadsheet S2600BP FSC Auto-SDR Config Sheet rev2.4_Candidate.xlsm (20210108) FRUSDR Tools: FRUSDR_V14_1_Build18_AllOS.zip ============================================================================= SYSTEM HARDWARE & SOFTWARE REQUIREMENTS/REVISIONS ============================================================================= - S2600BPB,S2600BPQ,S2600BPS,S2600BPL,S2600BPC baseboard. - BMC FW 2.42 or later - Front Panel, Hot-swap backplane, and Baseboard FRU data must be available for chassis auto-detection to succeed. ============================================================================= IMPORTANT INSTALLATION NOTES ============================================================================= NOTE: If you updated BIOS and did not clear CMOS Ram, you should do that before installing this package. ============================================================================= INSTALLATION PROCEDURE ============================================================================= 1. Ensure BMC FW release 2.42 or later is pre-installed before attempting this FRU/SDR update. 2. Copy all of the files and directories of this zip file to a USB key, hard disk drive or floppy drive. 3. Run command FRUSDR /fru S2600BPx.fru to update baseboard FRU to BMC. S2600BPB.fru : for S2600BP LBG 1G Dual 10G Mother board S2600BPQ.fru : for S2600BP LBG L Dual 10G Mother board S2600BPS.fru : for S2600BP SFP+ LBG-2 Dual 10G Mother board S2600BPL.fru : for S2600BP LBG 1G/L Dual 10G Mother board with Liquid cooling S2600BPC.fru : for S2600BP LBG Mother board with coolIT solution 4. Execute the following script to bring up the main FRU/SDR load menu: updS2600BP.nsh 5. Select Option 1 to do the SDR update. 6. Answer the prompts, and the SDRs will be loaded ============================================================================= KNOWN ISSUES/WORKAROUNDS ============================================================================= "FRUSDR.EFI /d fru" or ipmitool fru list cannot dump BMC FRU before SDR updated. ============================================================================= ISSUES FIXED ============================================================================= S2600BP_1.48 - 15010443289 [Purley][BMC]wrong chassis information in frusdr - update BIOS sensor according to BIOS EPS v1.19 S2600BP_1.47 -Update BIOS sensor number according to BIOS EPS v1.18 -HSD 1509288822 -S2600WF uses the wrong entity ID for the sensor "NVMe 1 Therm Mgn" S2600BP_1.45 -update FRUSDR utility to FRUSDR_V14_1_Build18_AllOS.zip S2600BP_1.44 -2103631992 The BMC EWS WebUI copyright date still shows the 2019 year. S2600BP_1.43 -sync BIOS sensor definition as BIOS EPS v1.13 "table41. BIOS sensors and SEL data" for HSD1507429379 S2600BP_1.42 -remove two BIOS sensor "UPI Fatl Sensor" for no definition in BIOS EPS v1.13 S2600BP_1.41 -Update frusdr.efi, frusdr_temp.efi ipmi.efi into FRUSDR_V14_1_Build17_AllOS S2600BP_1.39 -1506769657 Sel log appear “Cooling Device Sys Pump 2 | Lower Non-critical going low | Asserted” during AC cycles S2600BP_1.38 -1506677406 Only cover fan domain 0/1 in SDR for other chassis -1506527273 SDR record failure S2600BP_1.37 -2103622131 When retrieve the "P1/P2 Temperature" threshold by command or EWS, it shows "00" or "NA" -2203243919 [S2600BP] 1 of 2000 nodes failed for intermittent +1.05V_PCH_Aux SEL event, crossing upper non-critical threshold S2600BP_1.33 -Rename QPI sensor name from QPI to UPI S2600BP_1.29 -Fix H2212 with S2600BPL show 1 HDD only S2600BP_1.28 -Update FRUSDR tool to v14.1 build 11 -2103619781 S2600BPB SEL events reports Voltage BB +12.0V Upper Non-critical going high S2600BP_1.27 -2103619738 S2600BPB Voltage Voltage Fault reported during DC cycle and SAT FIO testing -2103619391 It will generate the "Exit Air Temp" log when on-line update the BMC with certain types of Link-Board -2201182147 4 of 4391 nodes failed for intermittent "VNN PCH Aux" SEL event, crossing upper non-critical threshold S2600BP_1.26 -1504473313.44: [FTF]Fan Boost value do not reach expected value during running FSC BAT_FSC_Functional_004.tcl test S2600BP_1.25 -220855900 [S2600BP] 4 of 3052 nodes failed for intermittent +1.8V PCH Aux SEL event, crossing upper non-critical threshold -220855434 [S2600BP] 9 of 3052 nodes failed for intermittent +3.3v (non vbat) SEL event, crossing upper non-critical threshold S2600BP_1.24 -1504572530 The thresholds for Pump RPM of High CT and High NC are not setting in BMC Threshold List -1504560008 No FAN Control Profile (lower bank) support during FSC record test on liquid cooling SKU -1504536167 "Chassis auto-detect error" on FRUSDR update with non-intel chassis - Fix "LSI3008 Temp" will show up for "Other" chassis problem. S2600BP_1.23 S2600BP_1.05 S2600BP_1.04 -1504469586 FTF script SDR_Hysteresis_Check.tcl test failed on S2600BP S2600BP_1.03 S2600BP_1.00 First release ============================================================================= FEATURES ADDED ============================================================================= S2600BP_1.46 -add new SKU S2600BPC for CCB3257 "S2600BP CoolIT Product Integration" S2600BP_1.42 -Add sensor "eSPI Reg Access" for feature "BMC eSPI register access restriction" S2600BP_1.40 -Add sensor "KCS Policy" for feature "KCS policy control mode" S2600BP_1.38 -Add 2Port PE Bridge Board FRU support -Implement S2600BP FSC Auto-SDR Config Sheet rev2.1_Candidate.xlsm (20180829) -Implement S2600BP FSC Auto-SDR Config Sheet rev2.0_Candidate.xlsm (20180824) S2600BP_1.37 S2600BP_1.35 -Implement S2600BP FSC Auto-SDR Config Sheet rev1.9_Candidate.xlsm (20180328) S2600BP_1.34 -Implement S2600BP FSC Auto-SDR Config Sheet rev1.8_Candidate.xlsm (20180306) -Add Remote Debug SDR record -Add FW Security SDR record S2600BP_1.33 S2600BP_1.32 -Add P1 Temperature and P2 Temperature SDR record S2600BP_1.31 -Implement S2600BP FSC Auto-SDR Config Sheet rev1.7_draft.xlsm (20180102) -Add Liquid cooling 24HDD SKU support S2600BP_1.30 S2600BP_1.29 S2600BP_1.28 S2600BP_1.27 -Implement S2600BP FSC Auto-SDR Config Sheet rev1.6_candidate.xlsm (20171110) S2600BP_1.26 -Implement S2600BP FSC Auto-SDR Config Sheet rev1.5_draft.xlsm (20171020) S2600BP_1.25 S2600BP_1.24 -Implement FSC Auto-configuraiton sheet 1.4 draft (20170822) S2600BP_1.23 -Implement FSC Auto-configuraiton sheet 1.3 release candidate (20170726) S2600BP_1.05 -Implement FSC Auto-configuraiton sheet 1.2 draft (20170609) -Add Liquid cooling sku S2600BPL support S2600BP_1.04 S2600BP_1.03 S2600BP_1.00 First release [END OF RELEASE NOTES]