============================================================================= Intel(R) Server Platform D40AMP FRU/SDR Update Release Notes ============================================================================= INTEL Enterprise Platform & Services Marketing Intel Corporation 2111 N.E. 25th Avenue, Hillsboro, OR 97124 USA ============================================================================= DATE: 19 Oct 2021 TO: Intel(R) Server Platform D40AMP customers SUBJECT: IBMC(R) FRU/SDR update package D40AMP_FRUSDR_0.20 release notes ============================================================================= LEGAL INFORMATION ============================================================================= Information in this document is provided in connection with Intel products. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document. Except as provided in Intel's Terms and Conditions of Sale for such products, Intel assumes no liability whatsoever, and Intel disclaims any express or implied warranty, relating to sale and/or use of Intel products including liability or warranties relating to fitness for a particular purpose, merchantability, or infringement of any patent, copyright or other intellectual property right. Intel Corporation may have patents or pending patent applications, trademarks, copyrights, or other intellectual property rights that relate to the presented subject matter. The furnishing of documents and other materials and information does not provide any license, express or implied, by estoppel or otherwise, to any such patents, trademarks, copyrights, or other intellectual property rights. Intel products are not intended for use in medical, life saving, or life sustaining applications. Intel may make changes to specifications and product descriptions at any time, without notice. Intel is a registered trademark of Intel Corporation. *Other names and brands are the property of their respective owners. Copyright (c) 2021 Intel Corporation. ============================================================================= ABOUT THIS RELEASE PACKAGE ============================================================================= SDR file version: 0.20 Baseboard FRU file version: 0.20 Master configuration file version: 0.01 System firmware update utility loader version: 14.2 Build 11 SDR data based on system/thermal team SDR spreadsheet: AMP FSC SDR config sheet - rev11_Draft_0811.xlsm FRU data based on the data sheet: N/A ============================================================================= SYSTEM HARDWARE & SOFTWARE REQUIREMENTS/REVISIONS ============================================================================= - D40AMP baseboard. - BMC FW 2.87a or later - Front Panel, Hot-swap backplane, and Baseboard FRU data must be available for chassis auto-detection to succeed. ============================================================================= IMPORTANT INSTALLATION NOTES ============================================================================= NOTE: If you updated BIOS and did not clear CMOS Ram, you should do that before installing this package. ============================================================================= INSTALLATION PROCEDURE ============================================================================= 1. Ensure BMC FW release 2.87a or later is pre-installed before attempting this FRU/SDR update. 2. Copy all of the files from the update package to a USB flash drive. 3. Start the UEFI Shell and make the USB flash drive the default device 4. Execute the following script to bring up the main FRU/SDR load menu: updD40AMP.nsh 5. Select Option 1 to do the SDR update. 6. Answer the prompts, and the SDRs will be loaded ============================================================================= KNOWN ISSUES/WORKAROUNDS ============================================================================= BMC behavior might be inconsistent up to 2 minutes after loading the firmware update. Initially, the BMCs were manufactured with an older style, SHA1 private key. This release causes the BMC to update its keys at first power on, and correct some known issues. This process takes about 2 minutes the first time it is run, and will lead to inconsistent behavior immediately following a firmware update. Waiting for 2 minutes will allow the BMC procedure to complete successfully. Once this is successful, you will not see this issue again. TennesseePass power on boards came with no FRU programmed, which causes fru loading to fail. You must load an intial FRU manually before the FRUSDR package can successfully load a fru. This is done with the /fru flag on sysfwupdt.efi ============================================================================= ISSUES FIXED ============================================================================= 0.20: - Change "HSBP U2 SSD Temp" and "RSSD Thrm Mrgn" tag to use SKU tag "U2AC" & "E1LAC" to fix with non-Intel SSD (KioXia, Samsung), these sensors will disappear after DC/AC. (Associated HSD [2103643769]) 0.19: - Change the SKU distinguish method that auto detects the HSBP product name. - Modify the Fan Profile Support record for all domains of E1.L SKU to fix that the other fans don't boost if remove one fan of the associated domain. (Associated HSD [2103642245]) 0.18: - Modify CPU related sensors name based on 0 to fix HSD issue that the CPU number is shown as "CPU0_0 & CPU0_1" or "CPU 1 Die1 & CPU 1 Die2" in SEL log after BMC v2.81h version. - Correct the "CPU VCCNAN" sensor name to "CPU VCCANA". 0.17: - Add domain 6 and domain 7 record for advanced fan failure sub-record. - Remove unused MTT CPU1/2 sensors. - Modify the board info area length of E1.L SKU. 0.16: - Modify the OEM record of all voltage sensors to fix sudden voltage peak. - Modify the ramp coefficient D of HSBP Temp 1/2. - Modify the LCC and UCC of stepwise curve 2 for U.2/Ruler SKU to change fan performance. - Correct the LC/LNC and normal minimum/maximum records for all system fan sensors. 0.15: - Add "STICKY_PS%_STATUS" tags for all PSU status sensors to fix HSD [2103639870] There is no expected SEL “Configuration error - The PSU is incompatible with one or more PSUs that are present in the system - Asserted” after plug in an alien PSU (TNP 1600W). - Modify Global Stepwise curve ID of Global Stepwise header ID 0 and 1. - Modify "Minimum performance profile" for U.2/Ruler SKU. 0.14: - Add "E1LAC" tag for enable HSBP PBA class record. - Modify clamp records of Ruler BP Temp and RSSD Thrm Mrgn. - Modify Ramp Coefficient D (MSB) of PCI Riser 1/2. - Modify LCC and UCC curves for U.2 and E1.L SKU. - Return all event only sensors to FRUSDR v0.09 setting, besides ADDDC Error sensor. 0.13: - Modify the name of CPU related sensors. 0.12: - Modify M value of system fan sensors. 0.11: - Add the U.2 FRU and E1.L FRU found messages in master.cfg. - Modify M value of 80mm fan to 0x45 to fix HSD [2103639642]The "Check AnalogSensors"report fail when run iLvss/iwVSS tool with "stress_whitley.pkx" packages, if select stress_whitley_noBMC.pkx packages no this issue.(iLvss:3.6.24; iwVSS:2.8.3). - Modify System Airflow normal reading and maximum. - Modify Right/Left FP Temp UNC/UC. - Modify the negative hysteresis: PSU 1/2/3/4 Temp, Ruler BP Temp, PCI Riser 1/2 and HSBP Temp 1/2. - Modify the Tcontrol: PCI Riser 1/2 and HSBP Temp 1/2. - Modify UCC and LCC records for U.2 and Ruler SKU. - Modify stepwise sub-records of header ID 0 and 1 for U.2/Ruler SKU. - Remove stepwise sub-records of header ID 2 for U.2/Ruler SKU. - Modify advanced fan failure sub-record for Ruler SKU. - Modify power correction factor of Qmin and Qmax for U.2 and Ruler SKU. - Modify Qmin of Ruler SKU. 0.10: - Add the "ADDDC error" sensor (0x20) to fix HSD [2103640068] There isn't SEL error to indicate ADDDC error after inject correctable error. - Orginize event only sensors. - Modify tag for U.2 HSBP related sensors and E1.L related sensors to fix HSD [2103640319][E1.L] There are two HSBP FRU (E1.L and U.2) shown in EWS, and BMC FW Health shows warning in sensor readings. 0.09: - Add RSSD Thrm Mrgn sensor (0x61) and RSSD status sensors (0xE0 ~ 0xE7) to fix HSD [2103640121][E1.L]There are no HSBP sensor and HDD sensors. - Add Fan Redundancy sensor (0x0C) and Fan Redundancy Map records to fix HSD [2103640073] Remove a system fan, the system status LED is still solid green. - Modify U.2 HSBP FRU tag to "U2AC". 0.08: - Remove Rear U.2 SSD Temp and Rear Temp 1/2. - Modify sensor name "Front U2SSD Temp" to "HSBP U2 SSD Temp", and "Front Temp 1/2" to "HSBP Temp 1/2". - Remove "Ruler BP Temp 2/3/4" and "Ruler BP MAXTemp". - Modify FRU device ID: PSU3, PSU4, U.2 HSBP, primary PDB and secondary PDB. - Remove rear U.2 HSBP FRU. 0.07: - Modify "Mid U2SSD Temp" sensor name to "Rear U2SSD Temp". - Modify Global Clamp Records: Remove LAN Temp, CPU0/1 VCCIO Temperature clamp sensor records and add Ruler BP MAX Temp, Front/Rear Temp 1/2 clamp sensor records. - Modify Global Stepwise Header Records: Remove Ruler BP MAX Temp, Front Temp 1/2 and Rear Temp 1/2. - Modify Global Stepwise Curve Records: Remove stepwise ID 5, 6, 7 records of U.2 SKU and change stepwise ID 4 to 3; Remove stepwise ID 5, 6, 7 records of Ruler SKU. - Modify Global Stepwise Curve Records: Modify the records of stepwise 2/3 for U.2 SKU and Ruler SKU. - Modify U.2 SKU profile and domain records. - Modify Ruler SKU profile and domain records. - Modify Auto Profile: set minimum performance profile to 3. 0.06: - Add HDD Status sensors (0xF0 ~ 0xF5). - Add "Rear Temp 1/2" and "Mid U2SSD Temp" sensors. - Change sensor number of all Mem VR Temp in Global Clamp Records. - Modify Clamp sensor: Remove CPU1 VR Temp, Add Mem 0 VR Temp. - Modify Profile to Domain relation: Both U.2 SKU and E1.L SKU page. - Add UNR records of Right/Left FP Temp. 0.05: - Change Mem VR 0/1/2/3 Temp sensor number to 0x6B/0x6C/0x6D/0x6E. - Remove "Rear Temp 1/2" and "Mid U2SSD Temp" sensors. 0.04: - Modify 4056 fan normal reading, normal minimum, lower critical and lower non critical. - Modify the sensor reading type of KCS Ctrl Mode to fix HSD[2103639230]Sensor "KCS Ctrl Mode" status is empty in EWS. - Add "ASM Key" sensor (0x64) to fix HSD[2103639664]The SEL shows "Mem 3 VR Temp" wrong sensor name after importing the Advanced System Management Key. 0.03: - Remove FP Right/Left FRU sensors. - Remove EMP FRU sensor and EMP Present sensor. - Modify 8080 and 4056 Fan sensor numbers. - Change Front/Middle U.2 BP Temp sensor name to Front/Rear Temp, and remove some Front/Middle U.2 BP Temp sensors. - Modify sensor number of M.2 Temp2, Mem 1~3 VR Temp, Ruler BP sensor Temp 1~3 and Front Temp 1/2. - Update clamp ID/input sensor number of Global Clamp Records. - Remove stepwise curve ID 3 and add stepwise curve ID 7/8 in Global Stepwise Header Records for U.2 SKU. - Update Global Stepwise Header Records. - Update clamp ID of clamp sub-record for U.2/Ruler SKU. - Update fan sensor number of fan sensor domain map. - Update the power unit map records. 0.02: - Correct the FRU device ID of daughter PDB (0x1B). - Correct the FRU device ID of U.2 HSBP (0x0D). 0.01: - First release ============================================================================= FEATURES ADDED ============================================================================= D40AMP_0.18: - Sync FSC table AMP FSC SDR config sheet - rev11_Draft_0811.xlsm. D40AMP_0.17: - Sync FSC table AMP FSC SDR config sheet - rev10_Draft_0729.xlsm. D40AMP_0.16: - Sync FSC table AMP FSC SDR config sheet - rev9_Draft_0720.xlsm. D40AMP_0.15: - Sync FSC table AMP FSC SDR config sheet - rev7_Draft_0706.xlsm. D40AMP_0.14: - Sync FSC table AMP FSC SDR config sheet - rev6_Draft_0630.xlsm. D40AMP_0.13: - Sync FSC table AMP FSC SDR config sheet - rev5_Draft_0618.xlsm. D40AMP_0.12: - Sync FSC table AMP FSC SDR config sheet - rev5_Draft_0608_2.xlsm. D40AMP_0.11: - Sync FSC table AMP FSC SDR config sheet - rev5_Draft_0604.xlsm. D40AMP_0.08: - Sync FSC table AMP FSC SDR config sheet - rev3_Draft_0511.xlsm. D40AMP_0.07: - Sync FSC table AMP FSC SDR config sheet - rev2_Draft_0420.xlsm. D40AMP_0.06: - Sync FSC table AMP FSC SDR config sheet - rev2_Draft_0416.xlsm. D40AMP_0.04: - Sync FSC table AMP FSC SDR config sheet - rev1_Draft_0324.xlsm. D40AMP_0.03: - Sync FSC table AMP FSC SDR config sheet - rev1_Draft_0315.xlsm. - Update sysfwupdt.efi uitilty to version Build 10. D40AMP_0.02: - Sync AMP AMP-FSC-SDR-config-sheet-rev1_Draft_0217.xlsm. - Copyright change to 2021 for all files. - Add new FRUs D40AMPFRONTPANELR (Device ID: 0xD0) and D40AMPFRONTPANELL (Device ID: 0xD1) for right/left front panels. D40AMP_0.01: - First release ============================================================================= REFERENCE MATERIAL ============================================================================= Common IBMC Firmware EAS Common Platform IBMC FW EPS [END OF RELEASE NOTES]