I N T E L ® I N T E G R A T O R T O O L K I T System Information Report Wed Sep 09 04:59:20 PM ******************************************************************************* My System ******************************************************************************* BIOS File Location C:\Users\wytheliu\Downloads\SY0073.bio BIOS ID SYSKLi35.86A.0073.2020.0909.1625 BIOS Date 09/09/2020 ******************************************************************************* BIOS Settings ******************************************************************************* [07cc] - CHECK BOX Clear Event Log ------------------------------------------------------------------------------- Enable to clear the Event Log at next boot. 0 : Disable (default) 1 : Enable [07cd] - CHECK BOX Event Logging ------------------------------------------------------------------------------- Enables or Disables Event Logging. If Enabled, BIOS will log POST Errors in NVRAM. 0 : Disable 1 : Enable (default) [07a3] - CHECK BOX USB Legacy ------------------------------------------------------------------------------- USB Legacy allows USB support under non-USB-aware OSes. Disabling USB Legacy will not disable USB keyboards during BIOS POST, including BIOS SETUP and Option ROMs. 0 : Disable 1 : Enable (default) [078e] - ONE_OF Portable Device Charging Mode ------------------------------------------------------------------------------- USB ports that are colored yellow support a Portable Device Charging Mode with higher maximum current.?Off: USB Port will not provide extra power during system sleep states. Charging in S3/S4/S5: USB Port will provide extra power during system sleep states. Charging Only: USB Port will always provide extra power but cannot be used to transfer data with USB 2.0 device. 0 : OFF 1 : Charging in S3/S4/S5 (default) 2 : Charging Only [05ac] - ONE_OF USB Port 01: ------------------------------------------------------------------------------- USB Ports 1 & 2 are located on the back panel.?Enable: All devices on this port will be available to BIOS and OS. Disable: Only keyboards will be available to BIOS, and all devices on this port will be unavailable to OS. No Detect: No devices on this port will be detected by BIOS, but all will be available to OS. Use this option to speed up BIOS boot. 1 : Enable (default) 0 : Disable 2 : No Detect [05ad] - ONE_OF USB Port 02: ------------------------------------------------------------------------------- USB Ports 1 & 2 are located on the back panel.?Enable: All devices on this port will be available to BIOS and OS. Disable: Only keyboards will be available to BIOS, and all devices on this port will be unavailable to OS. No Detect: No devices on this port will be detected by BIOS, but all will be available to OS. Use this option to speed up BIOS boot. 1 : Enable (default) 0 : Disable 2 : No Detect [05ae] - ONE_OF USB Port 03: ------------------------------------------------------------------------------- USB Ports 3 & 4 are located on the front panel.?Enable: All devices on this port will be available to BIOS and OS. Disable: Only keyboards will be available to BIOS, and all devices on this port will be unavailable to OS. No Detect: No devices on this port will be detected by BIOS, but all will be available to OS. Use this option to speed up BIOS boot. 1 : Enable (default) 0 : Disable 2 : No Detect [05af] - ONE_OF USB Port 04: ------------------------------------------------------------------------------- USB Ports 3 & 4 are located on the front panel.?Enable: All devices on this port will be available to BIOS and OS. Disable: Only keyboards will be available to BIOS, and all devices on this port will be unavailable to OS. No Detect: No devices on this port will be detected by BIOS, but all will be available to OS. Use this option to speed up BIOS boot. 1 : Enable (default) 0 : Disable 2 : No Detect [05b0] - ONE_OF USB Port 05: ------------------------------------------------------------------------------- USB Ports 5 & 6 are located internally on a USB header.?Enable: All devices on this port will be available to BIOS and OS. Disable: Only keyboards will be available to BIOS, and all devices on this port will be unavailable to OS. No Detect: No devices on this port will be detected by BIOS, but all will be available to OS. Use this option to speed up BIOS boot. 1 : Enable (default) 0 : Disable 2 : No Detect [05b1] - ONE_OF USB Port 06: ------------------------------------------------------------------------------- USB Ports 5 & 6 are located internally on a USB header.?Enable: All devices on this port will be available to BIOS and OS. Disable: Only keyboards will be available to BIOS, and all devices on this port will be unavailable to OS. No Detect: No devices on this port will be detected by BIOS, but all will be available to OS. Use this option to speed up BIOS boot. 1 : Enable (default) 0 : Disable 2 : No Detect [07b8] - CHECK BOX Chipset SATA ------------------------------------------------------------------------------- The Chipset SATA controller supports the internal black SATA port and M.2 SATA port. 0 : Disable 1 : Enable (default) [0063] - ONE_OF Chipset SATA Mode ------------------------------------------------------------------------------- Configures the Chipset SATA controller mode.?Warning: OS may not boot if this setting is changed after OS install.?AHCI: Supports advanced SATA features such as Native Command Queuing.?RAID: Allows multiple drives to be merged into larger volumes for increased performance and/or reliability. Always enables AHCI.?Warning: OS may not boot if this setting is changed after OS install. 1 : RAID 2 : AHCI (default) [0961] - CHECK BOX RST PCIe Storage Remapping ------------------------------------------------------------------------------- Configures the PCIe storage remapping. Warning: OS may not boot if this setting is changed after OS install. 0 : Disabled (default) 1 : Enabled [07ba] - CHECK BOX S.M.A.R.T. ------------------------------------------------------------------------------- Enables or Disables S.M.A.R.T - Self-Monitoring, Analysis, and Reporting Technology If supported on any attached drives, BIOS will monitor drive health. 0 : Disable 1 : Enable (default) [0963] - CHECK BOX SATA Port ------------------------------------------------------------------------------- Enables or Disables SATA Port 0 : Disable 1 : Enable (default) [0086] - NUMERIC Hard Disk Pre-Delay ------------------------------------------------------------------------------- Delay (in seconds) before hard drives are initialized. This can be used to increase the amount of time that the BIOS Splash Screen displays. Default Value is 0. Minimum Value : 0 Maximum Value : 30 [095c] - CHECK BOX HDD Activity LED ------------------------------------------------------------------------------- Determines HDD Activity LED behavior during S0 system power state. 0 : Disable 1 : Enable (default) [0945] - CHECK BOX M.2 PCIe SSD LED ------------------------------------------------------------------------------- Allows SSD activity from PCIe-based M.2 storage card to be indicated by the chassis? HDD activity LED. PCIe-based M.2 storage card must provide SSD activity LED signal in order to support this feature, as no activity would be detected otherwise. 0 : Disable (default) 1 : Enable [0836] - ONE_OF IGD Minimum Memory ------------------------------------------------------------------------------- Selects the minimum amount of system memory allocated to the Integrated Graphics Device (IGD). The maximum amount of memory allocated is determined by the operating system and video driver. 2 : 64 MB (default) 4 : 128 MB 8 : 256 MB 16 : 512 MB 32 : 1 GB [0083] - ONE_OF IGD Aperture Size ------------------------------------------------------------------------------- Selects the aperture size for the Integrated Graphics Device (IGD). 0 : 128 MB 1 : 256 MB (default) 3 : 512 MB 7 : 1024 MB [05fe] - ONE_OF IGD Primary Video Port ------------------------------------------------------------------------------- Selects preference for Integrated Graphics Device (IGD) display interface used when system boots. Auto will attempt to detect connected monitors, and will display video on a maximum of two ports. 0 : Auto (default) 5 : HDMI 7 : DisplayPort [05ff] - ONE_OF IGD Secondary Video Port ------------------------------------------------------------------------------- Selects preference for mirrored Integrated Graphics Device (IGD) display interface used when system boots. 0 : None (default) 7 : DisplayPort [05ff] - ONE_OF IGD Secondary Video Port ------------------------------------------------------------------------------- Selects preference for mirrored Integrated Graphics Device (IGD) display interface used when system boots. 0 : None (default) 5 : HDMI [07ad] - CHECK BOX Audio ------------------------------------------------------------------------------- Enables or Disables Onboard Audio. 0 : Disable 1 : Enable (default) [07ae] - CHECK BOX HDMI/DisplayPort Audio ------------------------------------------------------------------------------- If enabled, HDMI/DisplayPort output includes both audio and video. If disabled, HDMI/DisplayPort output is video only. 0 : Disable 1 : Enable (default) [07af] - CHECK BOX LAN ------------------------------------------------------------------------------- Enables or Disables the Onboard LAN Controller. 0 : Disable 1 : Enable (default) [0934] - CHECK BOX WLAN ------------------------------------------------------------------------------- Enables or Disables the Onboard WLAN Controller. 0 : Disable 1 : Enable (default) [0935] - CHECK BOX Bluetooth ------------------------------------------------------------------------------- Enables or Disables the Onboard Bluetooth Controller. 0 : Disable 1 : Enable (default) [0936] - CHECK BOX Near Field Communication (NFC) ------------------------------------------------------------------------------- Enables or Disables the NFC module that is connected to the NFC header. 0 : Disable (default) 1 : Enable [0947] - ONE_OF SD Card ------------------------------------------------------------------------------- Allows users to read/write to or disable the SD card reader 0 : Disable 1 : Read Only 2 : Read/Write (default) [0210] - CHECK BOX Enhanced Consumer IR ------------------------------------------------------------------------------- Enables or Disables Enhanced Consumer Infrared (CIR) 0 : Disable 1 : Enable (default) [0828] - CHECK BOX High Precision Event Timers ------------------------------------------------------------------------------- High Precision Event Timers are integrated into chipset hardware and are available for use by operating systems. They can be disabled if incompatible with an OS or application. 0 : Disable 1 : Enable (default) [07b5] - CHECK BOX Num Lock ------------------------------------------------------------------------------- If Num Lock is enabled, the keypad defaults to numeric functionality. 0 : Disable 1 : Enable (default) [009a] - ONE_OF PCI Latency Timer ------------------------------------------------------------------------------- Sets PCI Latency Timer for Bus Mastering. Limits the time in clock cycles that a PCI device can hold the PCI bus.?Only applies to Conventional PCI devices. 32 : 32 (default) 64 : 64 96 : 96 128 : 128 160 : 160 192 : 192 224 : 224 248 : 248 [0964] - CHECK BOX M.2 Slot ------------------------------------------------------------------------------- If enabled, the SATA port, PCIe and USB interface to the M.2 slot are enabled. 0 : Disable 1 : Enable (default) [0910] - ONE_OF Fan Control Mode ------------------------------------------------------------------------------- Select how the system fan is to be controlled.Quiet, Balanced and Cool are used to select a preconfigured automatic fan control profile. Custom selects the user-customizable automatic fan control profile. Fixed selects a static duty cycle for the fan. 0 : Fixed 1 : Custom 2 : Cool 3 : Balanced (default) 4 : Quiet 5 : Fanless [0919] - NUMERIC Fixed Duty Cycle (%) ------------------------------------------------------------------------------- Selects the duty cycle that the fan will operate at. Default Value is 70. Minimum Value : 1 Maximum Value : 100 [0913] - NUMERIC Minimum Duty Cycle (%) ------------------------------------------------------------------------------- Selects the minimum duty cycle that the fan will never go below. Default Value is 35. Minimum Value : 0 Maximum Value : 100 [0911] - ONE_OF Primary Temperature Sensor ------------------------------------------------------------------------------- Select the Primary Temperature Input for automatic fan control 0 : Processor (default) 1 : PCH [0912] - NUMERIC Minimum Temperature (°C) ------------------------------------------------------------------------------- Defines temperature that the fan control subsystem attempts to maintain for this device. Default Value is 74. Minimum Value : 0 Maximum Value : 127 [0914] - NUMERIC Duty Cycle Increment (%/°C) ------------------------------------------------------------------------------- Fan control will increase fan duty cycle by this % for each degree Primary Temperature Sensor is over Minimum Temperature. Default Value is 2. Minimum Value : 1 Maximum Value : 20 [0912] - NUMERIC Minimum Temperature (°C) ------------------------------------------------------------------------------- Defines temperature that the fan control subsystem attempts to maintain for this device. Default Value is 70. Minimum Value : 0 Maximum Value : 127 [0914] - NUMERIC Duty Cycle Increment (%/°C) ------------------------------------------------------------------------------- Fan control will increase fan duty cycle by this % for each degree Primary Temperature Sensor is over Minimum Temperature. Default Value is 2. Minimum Value : 1 Maximum Value : 7 [0435] - ONE_OF Active Processor Cores ------------------------------------------------------------------------------- Number of cores to enable in each processor package 0 : ALL (default) 1 : 1 [044f] - NUMERIC 1-Core Turbo Ratio ------------------------------------------------------------------------------- Maximum processor multiplier used by Intel® Turbo Boost Technology when 1 cores are active. Default Value is 29. Minimum Value : 4 Maximum Value : 29 [0452] - NUMERIC 2-Core Turbo Ratio ------------------------------------------------------------------------------- Maximum processor multiplier used by Intel® Turbo Boost Technology when 2 cores are active. Default Value is 27. Minimum Value : 4 Maximum Value : 27 [0080] - ONE_OF User Access Level ------------------------------------------------------------------------------- User Access Level determines the level of BIOS Setup access granted when the User Password is entered. 0 : No Access 1 : View Only (default) 2 : Limited 3 : Full Access [07d8] - CHECK BOX Hard Disk Drive Password Prompt ------------------------------------------------------------------------------- If disabled, BIOS will never prompt for an HDD password unless attempting to boot to a drive with a User HDD Password installed.?If set to Enable, BIOS will always prompt for an HDD password if a User HDD Password is installed. If set to Disable, BIOS will never prompt for an HDD password unless attempting to boot to a drive with a User HDD Password installed. 0 : Disable 1 : Enable (default) [09bf] - CHECK BOX Allow UEFI 3rd party driver loaded ------------------------------------------------------------------------------- Enable: Allow UEFI 3rd party driver to be executed / loaded during BDS stage. Disable: Prohibit UEFI 3rd driver to be executed / loaded during BDS stage. 0 : Disable (default) 1 : Enable [0804] - ONE_OF Unattended BIOS Configuration ------------------------------------------------------------------------------- Configuring the BIOS via Intel® Integrator Toolkit normally requires physical presence via a keyboard response prompt. Enabling Secure Boot will set Unattended BIOS Configuration to Always Prompt.?Configuring the BIOS via Intel® Integrator Toolkit normally requires physical presence via a keyboard response prompt. This prompt can disabled temporarily or permanently, or unattended BIOS configuration can be locked out entirely. If set to Lock, BIOS Setup is still accessible. Enabling Secure Boot will set Unattended BIOS Configuration to Always Prompt. Once Secure Boot is enabled, Unattended BIOS Configuration can only be set to Always Prompt or Lock. 0 : Always Prompt (default) 1 : Lock 2 : Temporarily Skip Prompt 3 : Never Prompt [0804] - ONE_OF Unattended BIOS Configuration ------------------------------------------------------------------------------- Configuring the BIOS via Intel® Integrator Toolkit normally requires physical presence via a keyboard response prompt. Enabling Secure Boot will set Unattended BIOS Configuration to Always Prompt.?Configuring the BIOS via Intel® Integrator Toolkit normally requires physical presence via a keyboard response prompt. This prompt can disabled temporarily or permanently, or unattended BIOS configuration can be locked out entirely. If set to Lock, BIOS Setup is still accessible. Enabling Secure Boot will set Unattended BIOS Configuration to Always Prompt. Once Secure Boot is enabled, Unattended BIOS Configuration can only be set to Always Prompt or Lock. 0 : Always Prompt (default) 1 : Lock [0085] - CHECK BOX Execute Disable Bit ------------------------------------------------------------------------------- Execute Disable Bit functionality may help prevent certain classes of malicious buffer overflow attacks when combined with a supporting operating system. 0 : Disable 1 : Enable (default) [07db] - CHECK BOX Intel® Virtualization Technology ------------------------------------------------------------------------------- Enables or Disables features that provide hardware support for virtualization. Requires power cycling and specific hardware/software installed to take effect. 0 : Disable 1 : Enable (default) [027a] - CHECK BOX Intel® VT for Directed I/O (VT-d) ------------------------------------------------------------------------------- Enables or Disables Intel® VT for Directed I/O (VT-d) which provides additional hardware support for managing I/O virtualization. If Enabled, BIOS will publish a DMA Remapping ACPI table. 0 : Disable 1 : Enable (default) [00f2] - ONE_OF Fixed Disk Boot Sector ------------------------------------------------------------------------------- Write Protect provides some Master Boot Record protection. Set to Normal while installing an operating system.?Only applicable to Legacy BIOS interfaces. 0 : Normal (default) 1 : Write Protect [090d] - CHECK BOX Intel® Platform Trust Technology ------------------------------------------------------------------------------- Enables or Disables Intel® Platform Trust Technology 0 : Disable (default) 1 : Enable [095d] - ONE_OF Intel® Software Guard Extension (SGX) ------------------------------------------------------------------------------- Enables or Disables Intel® Software Guard Extensions (SGX). Software Controlled: SGX is disabled initially. When SGX application and ME FW driver are installed, SGX will be enabled via a UEFI OS-BIOS runtime interface. 0 : Disabled 1 : Enabled 2 : Software Controlled (default) [095e] - ONE_OF SGX Owner EPOCHs ------------------------------------------------------------------------------- Keep or change the SGX Owner EPOCHs value. SGX sealing key is derived from Owner EPOCHs. Warning: after change the Owner EPOCH value, previously Intel SGX sealed data cannot be accessed.?Factory Default to use default Owner EPOCH value. New Random Owner EPOCHs to generate and use a new random Owner EPOCHs. User Defined Owner EPOCHs will extract customer defined EPOCHs value from EPOCH variable. 0 : Factory Default (default) 1 : New Random Owner EPOCHs 2 : User Defined Owner EPOCHs [095f] - CHECK BOX Reset SGX Owner EPOCHs to Factory Default ------------------------------------------------------------------------------- Reset Intel® SGX Owner EPOCHs to factory default value. Warning: after change the Owner EPOCH value, previously Intel SGX sealed data cannot be accessed. 0 : No (default) 1 : Yes [0960] - ONE_OF SGX Reserved Memory Size ------------------------------------------------------------------------------- Configure the SGX Reserved Memory Size. 0 : AUTO (default) 33554432 : 32MB 67108864 : 64MB 134217728 : 128MB [0960] - ONE_OF SGX Reserved Memory Size ------------------------------------------------------------------------------- Configure the SGX Reserved Memory Size. 0 : AUTO (default) 33554432 : 32MB 67108864 : 64MB [0960] - ONE_OF SGX Reserved Memory Size ------------------------------------------------------------------------------- Configure the SGX Reserved Memory Size. 0 : AUTO (default) 33554432 : 32MB [093b] - CHECK BOX Balanced Enabled ------------------------------------------------------------------------------- (null) 0 : Disable (default) 1 : Enable [093c] - CHECK BOX Low Power Enabled ------------------------------------------------------------------------------- (null) 0 : Disable (default) 1 : Enable [093d] - CHECK BOX Max Performance Enabled ------------------------------------------------------------------------------- (null) 0 : Disable (default) 1 : Enable [02ec] - NUMERIC VR Current Limits (ICCmax)(Amps) ------------------------------------------------------------------------------- Intel® Turbo Boost Technology will be disengaged if the processor is operating beyond this current limit. Default Value is 36. Minimum Value : 4 Maximum Value : 40 [0785] - ONE_OF Intel® Dynamic Power Technology ------------------------------------------------------------------------------- Configures processor power management features. Setting this to Off will disable Enhanced Intel SpeedStep® Technology and Intel® Turbo Boost Technology. 0 : Energy Efficient Performance (default) 1 : OFF 2 : Custom [07de] - CHECK BOX Enhanced Intel SpeedStep® Technology ------------------------------------------------------------------------------- Enhanced Intel SpeedStep® Technology allows the system to dynamically adjust processor voltage and core frequency, which can result in decreased average power consumption, decreased average heat production, and a quieter system.?Disabling Enhanced Intel SpeedStep® Technology will disable Intel® Turbo Boost Technology and Processor Idle State. 0 : Disable 1 : Enable (default) [07df] - CHECK BOX OS ACPI C2 Report ------------------------------------------------------------------------------- Enables or Disables OS ACPI C2 Report. If enabled, BIOS will report ACPI C2 State (mapped to processor C7 or deeper C state). 0 : Disable 1 : Enable (default) [078a] - ONE_OF Processor Power Efficiency Policy ------------------------------------------------------------------------------- Configures processor bias for power efficiency vs. performance. 0 : High Performance (default) 5 : Balanced 12 : Low Power [0669] - NUMERIC Package Power Limit 1 (Sustained) ------------------------------------------------------------------------------- Intel® Turbo Boost Technology will control processor power usage to the Sustained Mode Power Limit over a moving average time window: Sustained Mode Time (specified in seconds). Default Value is 20. Minimum Value : 0 Maximum Value : 30 [0667] - NUMERIC Package Power Limit 2 (Burst Mode) ------------------------------------------------------------------------------- Intel® Turbo Boost Technology will use this power limit for a very short duration. After that, the Sustained Mode Power Limit will be used.? The recommended value is 1.3 x the Sustained Mode Power Limit. Default Value is 25. Minimum Value : 0 Maximum Value : 30 [0668] - ONE_OF Package Power Time Window (Tau) ------------------------------------------------------------------------------- Intel® Turbo Boost Technology will control processor power usage to the Sustained Mode Power Limit over a moving average time window: Sustained Mode Time (specified in seconds). 113 : 224 81 : 192 49 : 160 17 : 128 112 : 112 80 : 96 (default) 48 : 80 16 : 64 111 : 56 79 : 48 47 : 40 15 : 32 110 : 28 78 : 24 46 : 20 14 : 16 109 : 14 77 : 12 45 : 10 13 : 8 108 : 7 76 : 6 44 : 5 12 : 4 75 : 3 11 : 2 10 : 1 [0950] - CHECK BOX Power Sense ------------------------------------------------------------------------------- When enabled, the power sense will monitor the input power from the power supply and will assert PROCHOT# to the CPU if the power is high enough that it risks causing the power adaptor to shut down. 0 : Disabled 1 : Enabled (default) [0071] - ONE_OF After Power Failure ------------------------------------------------------------------------------- Configures system behavior after AC power is lost.?If set to Stay Off, the System will stay in a power-off state after AC power is restored. If set to Last State, the System will return to the last power state before AC power was lost. If set to Power On, the System will automatically power-on after AC power is restored. 1 : Stay Off (default) 2 : Last State 0 : Power On [07e2] - CHECK BOX Deep S4/S5 ------------------------------------------------------------------------------- If Enabled, system will use less power while in S4/S5 sleep states, but will wake only via LAN, power button, or RTC alarm. 0 : Disable (default) 1 : Enable [095b] - ONE_OF S0 State Indicator ------------------------------------------------------------------------------- Determines front panel power LED behavior during S0 system power state. 0 : OFF 4 : Blink (primary color @ 1 Hz) 5 : Blink (alternate color @ 1 Hz) 1 : Blink (primary color @ 0.25 Hz) 6 : Blink (alternate color @ 0.25 Hz) 2 : ON (solid, primary color) (default) 3 : ON (solid, alternate color)) [01fa] - ONE_OF S3 State Indicator ------------------------------------------------------------------------------- Determines front panel power LED behavior during S3 system power state. 0 : OFF 4 : Blink (primary color @ 1 Hz) 5 : Blink (alternate color @ 1 Hz) 1 : Blink (primary color @ 0.25 Hz) 6 : Blink (alternate color @ 0.25 Hz) (default) 2 : ON (solid, primary color) 3 : ON (solid, alternate color)) [0072] - ONE_OF Wake on LAN from S4/S5 ------------------------------------------------------------------------------- Configures behavior when Wake on LAN packet is received during S4/S5. Wake on LAN must also be enabled in OS LAN driver.?Stay Off: System will not wake. Power On - Normal Boot: System will wake and use normal boot order. Power On - PXE Boot: System will wake and attempt boot to PXE. 0 : Stay Off 2 : Power On - Normal Boot (default) 3 : Power On - PXE Boot [07e3] - CHECK BOX Wake System from S5 ------------------------------------------------------------------------------- Enables or Disables Wake System from S5. If Enabled, system will wake at the selected date/time via RTC alarm. 0 : Disable (default) 1 : Enable [091d] - ONE_OF Recurrence ------------------------------------------------------------------------------- Select Daily/Weekly/Monthly to wake the system. 0 : Daily 1 : Weekly 2 : Monthly (default) [091e] - CHECK BOX Sunday ------------------------------------------------------------------------------- If enabled, system will wake at the selected time via RTC alarm on every Sunday. 0 : Disable (default) 1 : Enable [091f] - CHECK BOX Monday ------------------------------------------------------------------------------- If enabled, system will wake at the selected time via RTC alarm on every Monday. 0 : Disable (default) 1 : Enable [0920] - CHECK BOX Tuesday ------------------------------------------------------------------------------- If enabled, system will wake at the selected time via RTC alarm on every Tuesday. 0 : Disable (default) 1 : Enable [0921] - CHECK BOX Wednesday ------------------------------------------------------------------------------- If enabled, system will wake at the selected time via RTC alarm on every Wednesday. 0 : Disable (default) 1 : Enable [0922] - CHECK BOX Thursday ------------------------------------------------------------------------------- If enabled, system will wake at the selected time via RTC alarm on every Thursday. 0 : Disable (default) 1 : Enable [0923] - CHECK BOX Friday ------------------------------------------------------------------------------- If enabled, system will wake at the selected time via RTC alarm on every Friday. 0 : Disable (default) 1 : Enable [0924] - CHECK BOX Saturday ------------------------------------------------------------------------------- If enabled, system will wake at the selected time via RTC alarm on every Saturday. 0 : Disable (default) 1 : Enable [010c] - NUMERIC Wakeup Date ------------------------------------------------------------------------------- Select day of each month to wake the system. Select 0 for daily wakeup. Default Value is 1. Minimum Value : 0 Maximum Value : 31 [010e] - NUMERIC Wakeup Hour ------------------------------------------------------------------------------- Select wakeup hour in 24-hour format. For example, 15 means 3 PM. Default Value is 0. Minimum Value : 0 Maximum Value : 23 [010f] - NUMERIC Wakeup Minute ------------------------------------------------------------------------------- Select wakeup minute. Default Value is 0. Minimum Value : 0 Maximum Value : 59 [010a] - NUMERIC Wakeup Second ------------------------------------------------------------------------------- Select wakeup second. Default Value is 0. Minimum Value : 0 Maximum Value : 59 [0955] - CHECK BOX Wake from S3 via CIR ------------------------------------------------------------------------------- Enable or Disables Wake on Enhanced Consumer Infrared (CIR) from S3 sleep state. 0 : Disable 1 : Enable (default) [0956] - CHECK BOX Wake from S4 and S5 via CIR ------------------------------------------------------------------------------- Enable or Disables Wake on Enhanced Consumer Infrared (CIR) from (S4 and S5) system off state. 0 : Disable 1 : Enable (default) [091b] - CHECK BOX USB S4/S5 Power ------------------------------------------------------------------------------- Enables or Disables the USB Port power in S4/S5 state. This does not affect USB charging ports. 0 : Disable (default) 1 : Enable [0933] - CHECK BOX Wake on USB from S5 ------------------------------------------------------------------------------- Enables or Disables Wake on USB from S5 state 0 : Disable (default) 1 : Enable [093e] - CHECK BOX PCIe ASPM Support ------------------------------------------------------------------------------- Configures PCI Express (PCIe) Active State Power Management (ASPM). Tradeoffs involve power usage, performance, and device/driver compatibility.?If set to Disable, ASPM support is disabled for all PCIe devices. If set to Enable, ASPM support is enabled for all PCIe devices. 0 : Disable 1 : Enable (default) [07e4] - CHECK BOX Native ACPI OS PCIe Support ------------------------------------------------------------------------------- Enable for power savings and performance improvements. Note: Not all PCIe devices are compatible with this feature. 0 : Disable (default) 1 : Enable [07e5] - CHECK BOX Flash Update Sleep Delay ------------------------------------------------------------------------------- If set to Enable, the system will sleep for 20 seconds during the flash update power cycle. Enabling this feature may increase compatibility with power supplies. 0 : Disable (default) 1 : Enable [07eb] - CHECK BOX UEFI Boot ------------------------------------------------------------------------------- If Enabled, BIOS will attempt to boot via UEFI before using the legacy boot sequence. UEFI Boot must be enabled in order to boot to a drive larger than 2 TB (terabytes).?If both UEFI Boot and Legacy Boot are enabled, BIOS will attempt to boot via UEFI before using the legacy boot sequence. Enabling Secure Boot will also enable UEFI Boot and disable Legacy Boot. 0 : Disable 1 : Enable (default) [08f8] - ORDERED_LIST Boot Drive Order ------------------------------------------------------------------------------- Select the boot order for all detected bootable devices. 1 : D 2 : D 3 : D 4 : D 5 : D 6 : D 7 : D 8 : D 9 : D 10 : D 11 : D 12 : D 13 : D 14 : D 15 : D [0846] - CHECK BOX Legacy Boot ------------------------------------------------------------------------------- If Enabled, BIOS can attempt to boot via the legacy (non-UEFI) boot sequence.?If both UEFI Boot and Legacy Boot are enabled, BIOS will attempt to boot via UEFI before using the legacy boot sequence. Enabling Secure Boot will also enable UEFI Boot and disable Legacy Boot. 0 : Disable 1 : Enable (default) [007f] - ORDERED_LIST Boot Drive Order ------------------------------------------------------------------------------- Select the boot order for all detected bootable devices. 1 : Legacy Floppy 2 : D 3 : D 4 : D 5 : D 6 : D 7 : D 8 : D 9 : D 10 : D 11 : D 12 : D 13 : D 14 : D 15 : D [087e] - CHECK BOX Fast Boot ------------------------------------------------------------------------------- If Enabled, Boot from Network/Optical/Removable Devices and RAID configuration will be disabled. In addition, Video and USB devices (keyboards and drives) will not be available until after OS boot.?This feature cannot be enabled while a User Password or Hard Disk Drive Password is installed. This feature does not affect USB and video capabilities after OS boot. In order to disable Fast Boot without entering BIOS Setup: Power down the system, then hold down the power button until the system beeps. 0 : Disable (default) 1 : Enable [07ea] - CHECK BOX Boot USB Devices First ------------------------------------------------------------------------------- If Enabled, the BIOS will attempt to boot to supported USB devices before any other devices. If Disabled, the normal boot order will be used. 0 : Disable (default) 1 : Enable [084d] - CHECK BOX Boot Network Devices Last ------------------------------------------------------------------------------- If Enabled, Network devices will always be placed after non-Network devices in the boot priority. If Disabled, Network devices can be placed at any position in the boot priority, but will default to last. 0 : Disable 1 : Enable (default) [084e] - CHECK BOX Unlimited Boot to Network Attempts ------------------------------------------------------------------------------- If Enabled, network devices will receive unlimited boot attempts after the normal boot order has been exhausted. If Disabled, each boot device will only receive a single boot attempt. 0 : Disable (default) 1 : Enable [07ec] - CHECK BOX BIOS Setup Auto-Entry ------------------------------------------------------------------------------- If set to Enable, BIOS will halt and prompt to boot normally or enter Setup. This must be set to Disable to allow OS boot without user intervention.?This feature is not available while Fast Boot USB Optimization is set to Enable. 0 : Disable (default) 1 : Enable [07ed] - CHECK BOX Startup Sound ------------------------------------------------------------------------------- If enabled, BIOS will play the Intel® sound mark (about 3 seconds long) via onboard audio during each boot. BIOS may extend boot time slightly if necessary to finish playing the sound. 0 : Disable (default) 1 : Enable [083f] - CHECK BOX Internal UEFI Shell ------------------------------------------------------------------------------- Enables or Disables the Internal UEFI Shell. 0 : Disable (default) 1 : Enable [07e9] - CHECK BOX USB ------------------------------------------------------------------------------- Enables or Disables the ability to boot from supported USB Devices. 0 : Disable 1 : Enable (default) [07e6] - CHECK BOX Optical ------------------------------------------------------------------------------- Enables or Disables the ability to boot to Optical Devices. 0 : Disable 1 : Enable (default) [0931] - ONE_OF Network Boot ------------------------------------------------------------------------------- Enables or Disables the ability to boot from the network. Note: UEFI network boot option is automatically disabled if Legacy Boot setting is enabled. 0 : Disable 3 : UEFI PXE & iSCSI [0931] - ONE_OF Network Boot ------------------------------------------------------------------------------- Enables or Disables the ability to boot from the network. Note: UEFI network boot option is automatically disabled if Legacy Boot setting is enabled. 0 : Disable 1 : Legacy PXE (default) [07d2] - CHECK BOX Failsafe Watchdog ------------------------------------------------------------------------------- After a boot failure, uses BIOS defaults to allow the system to boot back into BIOS Setup while retaining the last used BIOS Setup values set by the user. 0 : Disable 1 : Enable (default) [0932] - CHECK BOX Suppress Alert Messages At Boot ------------------------------------------------------------------------------- If enabled, BIOS will display POST error messages for five seconds without requiring user action (keyboard input) before continuing to boot. Subsequent error messages of the same type will be suppressed from the display but recorded in the Event Log. 0 : Disable (default) 1 : Enable [0002] - ONE_OF Expansion Card Text ------------------------------------------------------------------------------- Configures display of text from PCI option ROMs during POST.?If set to Enable, BIOS will display text from any PCI option ROMs during POST. If set to Disable, BIOS will display text only from mass-storage PCI option ROMs during POST. If set to Hide All, BIOS will display no text from PCI option ROMs during POST. 0 : Disable (default) 1 : Enable 2 : Hide All [0823] - CHECK BOX Keyboard Ready Beep ------------------------------------------------------------------------------- If enabled, BIOS will beep once during POST when ready for keyboard input. BIOS will beep only if both keyboard and video are detected. Beep is played via onboard audio. 0 : Disable (default) 1 : Enable [07f1] - CHECK BOX POST Function Hotkeys Displayed ------------------------------------------------------------------------------- If set to Enable, BIOS will display Function key prompts during POST. Function key input will still be accepted even if prompts are disabled. 0 : Disable 1 : Enable (default) [07f2] - CHECK BOX Display F2 to Enter Setup ------------------------------------------------------------------------------- If set to Enable, BIOS will display "F2 to Enter Setup" prompt. F2 key input will still be accepted if this prompt is disabled. 0 : Disable 1 : Enable (default) [07f3] - CHECK BOX Display F7 to Update BIOS ------------------------------------------------------------------------------- If set to Enable, BIOS will display "F7 to Update BIOS" prompt. F7 key input will still be accepted if this prompt is disabled. 0 : Disable 1 : Enable (default) [07f5] - CHECK BOX Display F10 to Enter Boot Menu ------------------------------------------------------------------------------- If set to Enable, BIOS will display "F10 to Enter Boot Menu" prompt. F10 key input will still be accepted if this prompt is disabled. 0 : Disable 1 : Enable (default) [07f6] - CHECK BOX Display F12 for Network Boot ------------------------------------------------------------------------------- If set to Enable, BIOS will display "F12 for Network Boot" prompt. F12 key input will still be accepted if this prompt is disabled. 0 : Disable (default) 1 : Enable [0847] - CHECK BOX Secure Boot ------------------------------------------------------------------------------- If Enabled, BIOS will only boot to trusted operating system images. Secure Boot is supported only via UEFI Boot.?Enabling Secure Boot will allow boot only to trusted operating system installations. Enabling Secure Boot will also enable UEFI Boot and disable Legacy Boot. 0 : Disable (default) 1 : Enable [08f9] - CHECK BOX Install Intel Platform Key ------------------------------------------------------------------------------- Installs a Secure Boot Platform Key from Intel during next boot. See Advanced Help Text for more information.?This feature can be used if an OEM-generated Platform Key is not available, and the installed processor does not support Generate New Platform Key. 0 : Disable (default) 1 : Enable [0848] - CHECK BOX Force Secure Boot Defaults ------------------------------------------------------------------------------- Restores factory default Secure Boot databases during next boot, placing the system in Standard Mode. 0 : Disable (default) 1 : Enable [0849] - CHECK BOX Clear Secure Boot Data ------------------------------------------------------------------------------- Clears Secure Boot databases (PKpub, KEK, db, and dbx) during next boot, placing the system in Custom Mode.?Required to install a trusted operating system not supported by the factory default Secure Boot database. 0 : Disable (default) 1 : Enable [0833] - ONE_OF Platform Id ------------------------------------------------------------------------------- Platform Id 0 : Not Specified (default) 1 : SYSKLi35 ******************************************************************************* End of Report ******************************************************************************* Copyright © 2013, Intel Corporation. All rights reserved. Intel, Pentium, and Celeron are trademarks or registered trademarks of Intel Corporation or its subsidiaries in the United States and other countries.