================================================================================ Intel(R) Server Platform Integrated BIOS Firmware Release Notes ================================================================================ INTEL(R) Server Boards and Systems Intel Corporation 2111 N.E. 25th Avenue, Hillsboro, OR 97124 USA ================================================================================ DATE : September 14 2020 TO : Intel(R) Server Board M10JNP2SB SUBJECT : Integrated BIOS firmware 7.214 release notes ================================================================================ V7.214 - Date : 09/14/2020 - Filename : 7214_Production.ROM - Banner : Intel Server(R) Board M10JNP2SB BIOS V7.214 - CheckSum : 733D - MD5 : 8745d45f40514631df685206ac701874 - Build Time : 15:53:38 09/14/2020 - Recovery : 7214_REC.CAP - Microcode : Coffee Lake-S U0: M22906EA_000000D6 : Coffee Lake-S B0: M02906EB_000000D6 : Coffee Lake-S P0: M22906EC_000000D6 : Coffee Lake-S R0: M22906ED_000000D6 - SPS Ver. : SPS_E3_05.01.03.094.0 - VGA OpROM : AST2500: V1.10.01 : IGFX VBIOS: V9.2.1026 GOP: V9.0.1098 - LAN OpROM : I210: PXE: V1.5.88 ISCSI: V3.1.57 : I210: UEFI Driver: V8.7.10 - Description : - Based on 7213_Production.ROM - Support Intel Password requirement: 1.Disabled power on password during system boot. 2.Boot options can't be changed with user access permissions. 3.BBS Menu option is available with key in Administrator Password when Administrator Password configured. - Fixed WHQL Test Failed. - Change logo : 1024X768_Intel_SB_BIOS_splashscreen.jpg - Set “DMI System Information -> Product Name is only the contents of FRU 0's "Product Name" SMBIOS Type1 Product Name = BMC FRU Product Information: Product Name - Fixed that Network Stack configuration could not be configured with SCE Tool. - Added Intel workaround for detecting TCC active. ================================================================================ A local flash BIOS with ME update V7.2xx step by step: 01) Extract M10JNP2SBXXXX.zip to USB Storage. 02) Power on your system and boot to EFI SHELL. 03) Change and find the USB storage current directory (For example 'fs0:\M10JNP2SBXXXX'). 04) Run Update_BIOS.nsh 05) Flash finished, do AC off. 06) AC on, check BIOS revision and ME revision with normal status on BIOS Setup Menu.