*** This package contains the Emulex/Matrox graphics driver for Windows 2016 Server Only *** *** This driver is ONLY intended for Pilot3. *** *** DO NOT use with Pilot1 or Pilot2 based systems.*** *** Removed EULA. *** PRODUCT INFORMATION ------------------- Matrox G200e (Emulex) Display Only Driver, version 4.03.01.004 July 8th, 2016 INSTALLATION PROCEDURE ---------------------- To install the driver, run the "INSTALL.BAT" file. If the driver installs successfully, it will display "Installation successful." NOTE: The driver will install on Windows 2016. The drivers will not become active until the machine has rebooted. PACKAGE CONTENTS ---------------- * Matrox.Setup64.exe This is the setup used to install the driver. * Matrox.WddmUninstaller.exe This is the uninstaller that will be installed at the same time than the driver. It will be used to uninstall the driver. * MtxSetup.ini This file is used to customize the driver. * mxg2es16.cat This is the catalog file for Windows Server 2016. It's the file containing the signature and the certificate for the whole package. * MxG2eS16.inf This file is used to install the drivers for Windows Server 2016. Some settings are set through this file. * MxG2eDO64.sys This is the driver itself. It has been compiled for the 64 bits architectures and is copied into the "%WINDIR%/system32/drivers" folder. REQUIREMENTS AND DETAILS ------------------------ - The driver was compiled with Visual Studio 2015 Professionnal Update 2 x64 Environment and WDK ver. 10.0.10586.0. - The driver has been tested on Windows Server 2016. ENHANCEMENTS ------------ - Added support for WDDM 2.0 specification,, however this is only for WS2016+. Older OS still follow the WDDM 1.2 specification. - Moved the solution to Visual Studio 2015 and WDK 10.0.10586.0. FIXED ISSUES ------------ - Updated Uninstaller to support WS2016. KNOWN ISSUES AND LIMITATIONS ---------------------------- HISTORY ------- Ver 4.02.01 Build 006 - Customer reported BSOD fix - made sure to only parse list if populated. - Added a bandwidth limit. Removed support for all modes other than 32 bpp. Ver 4.02.01 Build 005 - Added support for previous generations of G200e. Driver now supports all generations. - Added hotplug feature. This feature has been disabled until thorough testing can be done. Ver 4.02.01 Build 003 - Increased the framebuffer size available to 16MB. Ver 4.02.01 Build 001 - Added support for PLL changes. Ver 4.01.03 Build 002 - Bug fix: BSOD caused by parsing an empty list. Ver 4.01.02 Build 001 - Bug fix: Hardware cursor corruption occurs when move cursor upwards near top of the screen. Ver 4.01.01 Build 005 - Updated the Matrox.Setup64.exe file in the release package. - Updated driver copyright date. Ver. 4.01.01 Build 002 - Fixed the monitor sleep issue in server core. Ver. 4.01.00 Build 012 - Removed an extra DDC read before querying modes. Ver. 4.01.00 Build 011 - Added a new registry switch User.ReportConnectionStatus. If TRUE, the driver relays the actual connection status of a monitor to the operating system. If FALSE, the driver always relays to the operating system that a monitor is connected, irregardless if this is true or not. By default, this registry switch is set to FALSE through the MxG2eDO.inf file. - Fixed issue reported by customer so that when monitor connected after boot up, string in Screen Resolution->Display is "Generic Non-PNP Monitor". - Fixed Pointer corruption observed when "Larger -150%" option was selected. Ver. 4.00.03 Build 002 - Compiled using Visual Studio 2012 Pro. - Using the Windows Driver Kit ver. 6.2.9200.16384. Ver. 4.00.03 Build 001 - Fixed the resolution list. Ver. 4.00.02 Build 004 - Updated driver strings. - Added co-installer to enable registry changes through INI file. - Fixed adapter memory info passed by registry key. Ver. 4.00.01 Build 005 - Compiled using Visual Studio 2012 RC. - Using the Release Preview SDK/WDK Build 8400). Ver. 4.00.01 Build 003 - Beta version Copyright (c)2012-2016, Emulex Corporation. All rights reserved.