Intel(R) Server Board S2600WT Product Family Firmware Update Package for Intel(R) One Boot Flash Update Utility and Windows* Preboot Execution Environment ================================================================================ Intel Enterprise Platform & Services Division - Marketing Intel Corporation 2111 N.E. 25th Avenue, Hillsboro, OR 97124 USA ================================================================================ DATE : April 23, 2019 TO : Intel(R) Server Board S2600WT Product Family customers SUBJECT : Release Notes for System Firmware Update Package ================================================================================ ABOUT THIS RELEASE ================================================================================ BIOS: 01.01.0028 ME: 03.01.03.051 BMC: 01.56.11315 FRUSDR: 1.18 ================================================================================ Support Platforms and Dependency ================================================================================ Processors supported: Intel(R) Xeon processor E5-2600 v3 series Intel(R) Xeon processor E5-2600 v4 series Microcode update versions: CPUID Version Status 0x306f2 0x0000003e Production (Haswell EP C0/C1) 0x406f1 0x0b000030 External (Broadwell EP B0) Production boards: Product Fab Version S2600WT Fab2 or above The following update process must be followed to ensure a trouble free update. 1. Manageability Engine (ME) firmware 2. FD 3. BMC firmware 4. BIOS 5. FRUSDR ================================================================================ IMPORTANT NOTE!!! ================================================================================ - This Update package must be installed using Intel(R) One-boot Flash Update (OFU) V14.0 Build 15 - BIOS downgrade from this release only can be done by using the BIOS recovery mode - Due to a fix in the BIOS R01.01.0020, older version of update utilities in older FSUP packages (R018 and older) can’t be used for downgrade even though under recovery mode, the customer needs to manually replace the utilities with the newer version utilities. ================================================================================ System Firmware Update Package Usage instructions ================================================================================ This package can be updated using one of the following methods: - Windows* or Linux* operating system using Intel(R) One-boot Flash Update (OFU) V14.0 Build 14 - Windows* Preboot Execution Environment (WinPE) To update from Windows* and Linux* or operating systems using the Intel(R) One Boot Flash Update Utility (OFU) Intel(R) One boot Flash Update utility can be downloaded from http://downloadcenter.intel.com/ and it is part of the "BIOS, Firmware Update & Configuration Utilities" for Windows* and Linux*. Please refer to Intel(R) OFU user guide about the details of installation and usage of OFU. Use OFU to update system firmware by the following steps: - Install OFU on Windows* or Linux* system - Download the latest firmware update package from http://downloadcenter.intel.com/ - Unzip package to a folder - Run the following command in Windows* command line/Linux* terminal window: :\flashupdt -u \flashupdt.cfg To update from Windows* Preboot Execution Environment (WinPE) The System Firmware Update Package can be inserted to Windows* PE customized image for creating a bootable Windows* PE CD. User is able to update system firmware from customized WinPE CD by the following steps: - Boot server with customized WinPE CD - Run script "WinPE21_x64_Update.bat" or "WinPE20_x86_Update.bat" (name may be varied depends on your own customization) Note: 1. The Intel(R) OFU utility is case sensitive. Therefore, when you transfer the Firmware Update Package using USB flash drive from a Microsoft Windows* system to a Linux environment, you must first extract under the Linux* environment. Otherwise, you will need to mount the USB flash drive manually with 'vfat' option under Linux to avoid conversion from upper case to lower case and vice versa. 2. To make Intel(R) OFU utility run properly under x86 or x64 OS, you have to read OFU release notes on known issues for OFU installation. 3. In this SFUP package, Intel only provide batch file "WinPE_x86_Update.bat" for WinPE2.0 32 bit solution "WinPE_x64_Update.bat" for WinPE2.1/3.0 64 bit solution as an example. Please refer to white paper "White Paper-Intel Server Utilities Procedure for WinPE.pdf" for details on building your own customized WinPE CD. 4. Windows PE 2.0 - built from Windows Vista SP1 32bit or EM64T 5. Windows PE 2.1 - built from Windows Vista SP1 or Windows Server 2008, EM64T 6. Windows PE 3.1 - built from Windows Server 2008R2, EM64T 7. Microsoft IPMI driver is loaded by default from WinPE CD, if you want to use Intel IPMI driver instead of MS IPMI driver for firmware update, you can un-install Microsoft IPMI driver by: Devicesetup.exe ¨Cv remove *IPI0001 Note: IPI0001 is the device ID for Microsoft IPMI driver. 8. If to update backup BIOS region or NVRAM, you need to customize the OFU update scripts (eg.flashupdt.cfg) and add "UpdateBackupBios" or "UpdateNvram" parameter. ================================================================================ IMPORTANT NOTICE ================================================================================ 1. BIOS R01.01.0018 will include a security revision upgraded. BIOS downgrade is not allowed from the OS and can only be performed on uEFI shell using the BIOS recovery jumper method. 2. BIOS R01.01.0009 will enable UEFI Secure Boot and include below limitations: - Please read "BIOS UEFI SECURE BOOT IMPACT AND MITIGATION METHOD" section in this BIOS release notes - All customer settings saved in BIOS NVRAM will be lost after new BIOS upgrade - BIOS downgrade is not allowed if user has enabled BIOS secure boot. All customer setting will be lost also if downgrade to previous BIOS release - Backup BIOS region is also required to be updated to prevent recovery failure please use release package to update BIOS - There is downgrade hang risk if you don't follow above rules - Further BIOS release will not suffer from these side effects as the NVRAM region is formatted as authenticated variable storage 3. System will hang 0xbf after downgrading BIOS (E5-2600V4 code tree) to R0011/R0009(E5-2600V3 code tree) randomly - Set SUT to recovery mode to power on, then set it back to normal boot to see whether it is recovered 4. The iFlash32 utility parameter of 'UpdateNvram' is not supported under Normal Mode, however it is only supported under Recovery Mode 5. Design change for to change default setting from to <10>. Need to press to see the new default string 6. Suggest to press 'F9' to load default if using the 'IOU Non-posted prefetch control' setup options in the first time ================================================================================ BIOS UEFI SECURE BOOT IMPACT AND MITIGATION METHOD ================================================================================= 1. Customer Setting Loss Issue and Mitigation Method When user upgrades BIOS with secure boot feature, the NVRAM will be automatically formatted as authenticated variable physical storage. However, all previous customer settings storage in NVRAM will be lost even if user does not enable UEFI secure boot feature. Users can take the follow recipe to save and restore their settings based on the actual NVRAM usage if they wish to upgrade or downgrade between BIOS with or without secure boot feature. Supposing customer requires to save & restore their specific NVRAM named 'var': Steps: 1. Prepare FAT partition USB key (or HDD). 2. Boot to EFI shell. 3. Check the file system mapping (e.g. fs0:) of the USB key with 'map -r' command. 4. Use 'dmpstore var -s fs0:\var.bin' to save the variable to the physical file. 5. Perform BIOS update and reboot system. 6. Boot to EFI shell. 7. Use 'dmpstore var -l fs0:\var.bin' to restore the variable. 8. Reboot the system if the customer setting requires reboot to take effect. Notes: 1. Immediate reboot after BIOS update is mandatory. Or the restore operation will not take effect. 2. Customers can repeat step 4 and step 7 for several times if they need to save & restore multiple NVRAM variables. 3. Most of BIOS customer settings by SysCfg can also be restored in this way. Customers can follow previous step1~8 by substituting 'Setup' for 'var' in the sample. 4. For BIOS downgrade case, step7 cannot be used to restore authenticate variables (e.g. PK, KEK, DB, DBX) to non-authenticated NVRAM storage 2. Recovery Mode Failure There is known bug that it cannot POST successfully with authenticated NVRAM storage. This will cause platform recovery failure and permanent deny of service (PDOS) if the primary BIOS region gets corrupted for some reason. It is required to update backup BIOS region when upgrade BIOS capsule with secure boot feature. Notes: For downgrade case, user is not required to update backup BIOS region as new BIOS with secure boot feature can handle NVRAM with old storage format: it will format it to new authenticated variable storage automatically. However, care must be taken when downgrading BIOS in recovery mode: After flashing BIOS without secure boot feature, user should restore recovery HW jumper immediately before platform reset.If platforms reset occurs before restoring recovery HW jumper, the backup BIOS will once again format NVRAM to new storage format, which will cause newly flashed BIOS (without secure boot feature) POST failure after user restores recovery HW jumper. ================================================================================ Issues Fixed in BIOS 01.01.0028 ================================================================================ [HSD-ES][1506741623]:FW-UEFI-Vuln-2018-031 - Dynamic loops accessing one element beyond boundary due to <= operator Update ME to 03.01.03.051 Update BDW microcode to 0b000030 Update HSW microcode to 0000003e Update the Security Revision:1010 ================================================================================ Issues Fixed in ME 03.01.03.051 ================================================================================ Diagnostic interface crash after sending IPMI command SendRawPmBusReq with imput: 0x2E 0x00 0xD9 0x57 0x01 0x00 0x50 0x00 0x7E 0x00 0x00 0x00 0x20 0x00 0x00 Lack of protection when there was I2C transaction with WriteLength = 0 and Transaction.Type = Write. =============================================================================== Issues Fixed in BMC 01.56.11315 =============================================================================== -1507116141: Java Certificate Expires on latest BMC for Romley and Grantley -2103624504: [Grantley][BMC]EWS always login failed after force update BMC 1.55.11282 revert security fix -2205553943: BMC leaks users' hash even when the cipher suite is disabled in the mask Defects which are side effect of above security fix. 2103624546, 2103624504, 2103624561, 2103624562, 2103624564, 2103624532, 2103624549, 2103624559 ================================================================================ Issues Fixed in FRUSDR 1.18 ================================================================================ - 1506972278: Fail to change fan offset from BIOS setup page or command ============================================================================= LEGAL INFORMATION ============================================================================= Information in this document is provided in connection with Intel products. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document. Except as provided in Intel's Terms and Conditions of Sale for such products, Intel assumes no liability whatsoever, and Intel disclaims any express or implied warranty, relating to sale and/or use of Intel products including liability or warranties relating to fitness for a particular purpose, merchantability, or infringement of any patent, copyright or other intellectual property right. Intel Corporation may have patents or pending patent applications, trademarks, copyrights, or other intellectual property rights that relate to the presented subject matter. The furnishing of documents and other materials and information does not provide any license, express or implied, by estoppel or otherwise, to any such patents, trademarks, copyrights, or other intellectual property rights. Intel products are not intended for use in medical, life saving, or life sustaining applications. Intel may make changes to specifications and product descriptions at any time, without notice. Intel is a registered trademark of Intel Corporation. *Other names and brands are the property of their respective owners. Copyright (c) 2019 Intel Corporation. A portion of this firmware is open source code, which falls under the GPL 2.0 license. [END OF RELEASE NOTES]