================================================================================ Multi-Core Intel(R) Xeon(R) Processor-Based Server BIOS Development ================================================================================ INTEL Enterprise Products and Services Division Intel Corporation ================================================================================ DATE : July. 12 2018 TO : Multi-Core Intel(R) Xeon(R) Processor-Based Server Platform customers SUBJECT : BIOS Release notes for version 01.01.0027 ================================================================================ LEGAL INFORMATION ================================================================================ Information in this document is provided in connection with Intel Products and for the purpose of supporting Intel developed server boards and systems. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document. Except as provided in Intel's Terms and Conditions of Sale for such products, Intel assumes no liability whatsoever, and Intel disclaims any express or implied warranty, relating to sale and/or use of Intel products including liability or warranties relating to fitness for a particular purpose, merchantability, or infringement of any patent, copyright or other intellectual property right. Intel Corporation may have patents or pending patent applications, trademarks, copyrights, or other intellectual property rights that relate to the presented subject matter. The furnishing of documents and other materials and information does not provide any license, express or implied, by estoppel or otherwise, to any such patents, trademarks, copyrights, or other intellectual property rights. Intel products are not intended for use in medical, life saving, or life sustaining applications. Intel may make changes to specifications and product descriptions at any time, without notice. Intel is a registered trademark of Intel Corporation. *Other names and brands are the property of their respective owners. Copyright (C) 2018 Intel Corporation. ================================================================================ ABOUT THIS RELEASE ================================================================================ Build Stamp : SE5C610.86B.01.01.0027 Build Date : July. 10 2018 ================================================================================ Supported Platforms ================================================================================ Cottonwood Pass CottonwoodPassSasK.bin SFID: 0xC0C4BD26 CottonwoodPassSas.bin SFID: 0xBEC2BB26 CottonwoodPass.bin SFID: 0xC1C5BE26 Kennedy Pass KennedyPass.bin SFID: 0xA174D8CE Taylor Pass TaylorPass.bin SFID: 0xA578DCCE Wildcat Pass WildCatPass.bin SFID: 0xBA23487E ================================================================================ BIOS COMPONENTS/CONTENTS ================================================================================ Processors supported: Haswell EP Processor Broadwell EP Processor Microcode update versions: CPUID Version Status 0x306f2 0x0000003d Production (Haswell EP C0/C1) 0x406f1 0x0b00002e External (Broadwell EP B0) On-Board Component Option ROM Versions: all_gigabit_pxe_v1.5.70.LOM - 1G PXE OpROM v1.5.70 (for all EPSD gigabit controllers, including LOMs and I/O modules) all_10g_pxe_v2.3.41.LOM - 10G PXE OpROM v2.3.41(for all EPSD 10G controllers, including LOMs and I/O modules) all_iscsi_v3.0.48.LOM - iSCSI Boot OpROM v3.0.48(for all EPSD gigabit and 10G EPSD controllers, including LOMs and I/O modules) all_10g_fcoe_v1.8.17.LOM - 10G FCoE OpROM v1.8.17(for EPSD 10G Niantic I/O module) X540_Fcoe.LOM - 10G FCoE OpROM v1.8.24(for EPSD 10G X540 controllers, including LOMs and I/O module) E4702X4.EFI - 10G PCIe gigabit controller UEFI driver ver 4.7.02 E6604X3.EFI - 1G controller UEFI driver ver 6.6.04 sSataOrom.bin - sSata RAID OpROM V4.3.0.1018 SataOrom.bin - Sata RAID OpROM V4.3.0.1018 SataDriver.efi - Sata UEFI RAID OpROM V4.3.0.1018 sSataDriver.efi - sSata UEFI RAID OpROM V4.3.0.1018 ESRT2.ROM - ESRT II legacy OpROM A.14.10171446I EfiSasDriver.efi - ESRT II UEFI RAID OpROM 03250000 ACM : v03.01.00(PW version) Reference Code Version : v4.3.0 Management Engine Firmware Version : 03.01.03.050 Security Revision : 0909 ================================================================================ INTRODUCTION ================================================================================ x*ME.cap - It is for ME and PTUFW upgrade ================================================================================ INSTALLATION NOTES ================================================================================ WARNING: It is very important to follow these instructions as they are written. Failure to update using the proper procedure may cause damage to your system. Firmware flash utility: iFlash32_V14_0_Build12 1.User can update BIOS flash image via either of the follow methods... A. UEFI iFlash32 1. Copy the entire contents of the DXXX_Package.zip archive file to the HDD or USB flash drive. (All of the files in the zip archive must reside in the same directory.) 2. Boot to UEFI Shell, then change the Shell to mapped device file system Example: Shell> fs0: (or fs1:) 3. Run updAll.nsh for BIOS, ME and FD region upgrade together. updBios.nsh, updME.nsh and updFD.nsh for each region upgrade respectively. 4. Reboot system after the update is completed. 5. Do *NOT* interrupt the BIOS POST during the first boot. B. Use flash programmer to burn the new BIOS ROM image (16MB) into the flash chip. 2.BIOS update under recovery mode as below methods The USB media is necessary for primary BIOS upgrade and must contain the following files under the root directory, you can capture all the ingredients from BIOS release package: 1. UEFI iFlash32 (including IFlash32.efi and ipmi.efi ) 2. *.CAP( the released BIOS capsule which version you expect to update) 3. Startup.nsh (update accordingly to use proper *.CAP file, and NVRAM would be forced update by default) A: Install USB media after recovery boot to shell, you need to follow below steps 1. Under Shell, type "map -r" to map all disc 2. Change the Shell to mapped device file system Example: Shell> fs0: (or fs1:) 3. Execute the startup.nsh scripts for BIOS update, wait for BIOS update complete 4. Power OFF the system, and revert the recovery jumper position to "normal operation". 5. Power ON the system. 6. Do *NOT* interrupt the BIOS POST during the first boot. B: Installed USB media prior to recovery boot It will boot automatically into EFI Shell to invoke the Startup.nsh script and start the flash update application (IFlash32.efi). IFlash32.efi requires the supporting BIOS Capsule image file (*.CAP). After the update is complete, there will be a message displayed stating that the "BIOS has been updated successfully" indicating the recovery process is finished. The User should then switch the recovery jumper back to normal operation and restart the system by performing a power cycle. Notes: If to update backup BIOS region, you need to custimize the iflash32 update scripts and add "UpdateBackupBios" parameter Notes: Setup structure has been changed in BDX BIOS. If downgrading BDX BIOS to lower versions or HSW BIOS, please add 'UpdateNvram' parameter. Note: From D0070 BIOS, remove 'UpdateNvram' support under Normal Mode for iflash32 tool for security reason of SRA bios, it still can work under Recovery Mode if NVRAM clean up is really needed. Note: If User customizes ITK capsule and BIOS admin password is set, BIOS SMI handler requires extra parameter of "password" in iFlash32 mail box: e.g. iFlash32.efi -u Bios.cap Password=intel@123 -ni, no requirement when BIOS admin password is not set or standard BIOS release capsule is used. Note: If BIOS version on SUT is older than R0009, then please update to R0009 firstly for further update. Note: If downgrade to BIOS version R0008 or older, please switch to Recovery Mode if online method is used. ================================================================================ BIOS RECOVERY INSTRUCTIONS ================================================================================ The Recovery process can be initiated by setting the recovery jumper (called BIOS Recovery Boot Jumper) A BIOS recovery can be accomplished from backup BIOS region. BIOS starts the recovery process by first loading and booting to the recovery image from backup BIOS region. This process takes place before any video or console is available. Once the system boots to the recovery image use the following steps to perform the BIOS recovery: 1. Power OFF the system. 2. Switch the recovery jumper. Details regarding the jumper ID and location can be obtained from the Board EPS for that Platform. 3. Power ON the system. 4. The BIOS POST screen will appear displaying the progress and system automatically boots to the EFI SHELL. 5. Follow the BIOS recovery update manual for BIOS recovery. ================================================================================ ME FW Capsule INSTALLATION NOTES ================================================================================ WARNING: It is very important to follow these instructions as they are written. Failure to update using the proper procedure may cause damage to your system. !!!!! Please make sure AC plug in during update !!!!! !!!!! AC failure during update may cause damage to your system and unrecoverable !!!!! User can update ME image via either of the follow methods: A. UEFI iFlash32 1. Copy the entire contents of the DXXX_Package.zip archive file to the HDD or USB flash drive. (All of the files in the zip archive must reside in the same directory.) 2. Boot to UEFI Shell, then change the Shell to mapped device file system Example: Shell> fs0: (or fs1:) 3. Use updME.nsh and updFD.nsh for ME FW upgrade. 4. Reboot system after the update is completed. B. Use flash programmer to burn the new BIOS ROM image (16MB-From BIOS release package ) into the flash chip. ================================================================================ IMPORTANT NOTICE ================================================================================ 1. Create a BIOS setup option to control the MRC debug serial log Enable/Disable which located at "Hardware Verification" group, default as disabled. If you still have requirement to identify the failing DIMMs, please enable the option manually. [Wildcat Pass specific]If you want to identify a failing DIMM. It need connect serial port to dump MRC debug message. This BIOS version default enable MRC debug message for WCP 3DPC DIMM sorting. When below message are showed on serial port, it is means 3DPC issue caused by IDT PLL. The failed DIMM is at socket 1, channel 1, DIMM 2. ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ N1.C1.D2: # PLL Lock errors=4 N1.C1.D2: # PLL Lock errors=5 PLL lock errors ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ 2. Beta ME 03.00.03.688 integrated in D332 release. Two methods for ME upgrade: 1)Use flash programmer to burn the new BIOS ROM image. 2)Use updAll.nsh scripts under UEFI shell for BIOS online update.(ME, FD and BIOS need to be upgrade together) 3. The old type W25Q128FVSIG flash parts don't support Quad mode, but the ME version after 03.00.03.688 with flash Quad mode enabled by default, so if you want to burn the BIOS ROM which has new ME integrated, D332 or after, you have to follow below BIOS workaround: 1) Use BIOS D308 boot with the type of flash parts first, 2) Burn the BIOS ROM to the flash parts by programmer. 4. There is a capsule map change from d288. Bios revision lower than d252 need the following steps to update to d288 and later version. 1) Flash d252 bios capsule first. Reboot the system and boot to shell 2) Flash D332 bios capsule. Bios revision higher than or equal to d252 can update to D332 or later version directly. 5. Downgrade from d332 or higher revision bios to d308 or lower revision bios need to add ?pdateNvram?parameter. The command is as the following: Iflash32 -u CapsuleFileName UpdateNvram -ni -nopc 6. Hidden the HWV group from D422 release, if any team require it, please use ITK to configure the hidden settings. 7. The issues reported on HSX A0 CPU are not officially support from now on, please use B0 stepping for test. 8. Txt feature disabled on D389 BIOS as the temporary workaround for WBG B1 factory volume build. 9. ME configuration settings were modified on D342 for sensor errors fix, ME and FD need to be updated. Propose to use updAll.nsh scripts for whole BIOS upgrade. 10. C6 disabled by default and Cluster on Die enabled on D342. To make sure latest feature setting is used, please load ?9 ?in setup after capsule bios update. 11. Old revision Iflash32 ,syscfg ,OFU utility will lead to system hang on D342 or further BIOS release. Iflash32 need to upgrade to latest revision v13 build 2, looking forward for syscfg ,OFU new revision release. 12. Do production sign from D389 for external BIOS release which would block online update from previous version. So only binary release on this version, internal team to burn the ROM by programmer. If any external users, please contact BIOS owner for the intermediate version for online update support. The package put to the BIOS folder, please tightly follow ReadMe.txt for BIOS upgrade. If BIOS already update to version D389, it can't be downgrade to previous version any more. 13. There is a great IIO setup variable change in d357.Update between d357 or higher revision bios and d342 or lower revision bios need to add "UpdateNvram" parameter. The command is as the following: Iflash32 -u CapsuleFileName UpdateNvram -ni, or you can use updAll.nsh, updBios.nsh, updMe.nsh, updFd.nsh scripts. If you want to update backup region together with UpdatNVram, please use "Iflash32 -u CapsuleFileName UpdateBackupBios+UpdateNvram -ni -nopc" 14. BIOS integrated BIOS ACM 0.83D production signed version for TXT feature enabling on WBG B1 platform, but with TXT disabled by default. If any team perform the Txt validation, please update BIOS D422_txt.cap through online update first, and ensure to provision TPM with NPW configure. 15. If you want to use the capsule in D406 or later version for BIOS online update, please make sure your system BIOS already upgrade to D389 or later. 16. This BIOS release include Cottonwood pass and Wildcat pass powerville 1G NIC sku PO support, and enabled Taylor Pass support. 17. HSX A0 uCode was removed from D422 BIOS. 18. UpdMe.nsh auto-script in D437 added the policy to prevent ME upgrade base on BIOS version prior to D437 for ME update issue workaround on D422, so please use "iflash32 -u -ni D437_ME.cap" manually for ME update. 19. Enable three BIOS ROM images for CWP SAS, SasK and non SAS skus seperately on D473, please offline program your BIOS image with D473 binary for your Non-SAS SKU CWP alpha board. (This is one time job, after that, you can upgrade by cap file) 20. Update iflash32 utility to ver 13 build5 for CWP support. Online update from D473 to D487 can be supported on CWP. 21. Keep the IDT B0 DIMM supported on D487 even though BDE PC code integrated. 22. The UpdAll/UpdBios.nsh enabled the auto-scripts to force update backup BIOS region and NVRAM region, it will cause all BIOS settings restore to default.(Due to we found some system's backup region with very old BIOS version, and BIOS NVRAM changed) 23. Start to release Txt supported BIOS image from D519 since most teams transfer to WBG B1 boards. Txt feature is not functional on WBG B0 board. 24. BIOS D533 has BIOS setup options default change due the thermal request and PV sync, keep the update script for NVRAM and backup BIOS region update. Refer to #22. 25. The NIC PXE ROMs upgrade on D533 which require the NIC EEPROM to be updated to latest version first, you can get the package from Andante. 26. Disable support for RDIMMs with non-production Registers Rev, such as IDT B0... 27. WCP only: ME configuration change to support WCE device, a new MS SMBus device will appear in device manager, it? expected behavior. 28. CCB 194 was implemented on the BIOS release, the PCIe correctable error logging was disabled by default, if you want to test it, please enter BIOS setup and enable it in advance. 29. If you use auto-scripts for BIOS update, please make sure the previous version is D533. Since we have frozen the NVRAM from D533 and the D545 release scripts without updating NVRAM. 30. COD(Cluster On Die) BIOS default setting changed to disabled per OIV's request, since lack of VMware support for COD. 31. Integrated the PW ACM/SINIT from D592, if you want to enable Txt for Tboot test, please make sure the TPM performed production provisioning. 32. The BIOS R01.01.0002 auto scripts will force to update both normal and backup BIOS region since security revision was updated, Once user upgrade BIOS to R01.01.0002, it will prevent BIOS downgrade to previous version that with low security revision, user can use BIOS recovery mode for BIOS downgrade 33. Security revision upgrade on D627, it will prevent BIOS downgrade to previous version that with low security revision, user can use BIOS recovery mode for BIOS downgrade 34. The BIOS R01.01.0003 included security fix and security revision upgrade, refer to item #32. 35. If do online BIOS update to R01.01.0003, user must use the auto scripts enabled in the release package which will force update BIOS NVRAM and backup region. 36. BIOS R0003 and D633 have the same security revision, user can do normal BIOS update between them. 37. BIOS R0004 is branched from D633(Drop2 RC1), and the update script will force update NVRAM and backup region. 38. BIOS D730 will enable UEFI Secure Boot and include below limitations: - All customer settings saved in BIOS NVRAM will be lost after new BIOS upgrade. - BIOS downgrade is not allowed if user has enabled BIOS secure boot. (All customer setting will be lost also if downgrade to previous BIOS release.) - Only debug secure boot keys are deployed for evaluation purpose only. (If user once enabled UEFI secure boot, he/she needs to replace to product keys provided by future BIOS release with new SysCfg tool.) - Backup BIOS region is also required to be updated to prevent recovery failure (already covered in BIOS update nsh script file in release package). - There is downgrade hang risk if you don't follow above rules. Please refer to Grantley BIOS EPS 9.4.7 for more details of known side effects of UEFI secure boot. 39. BIOS D733 will enable UEFI Secure Boot and include below limitations: - All customer settings saved in BIOS NVRAM will be lost after new BIOS upgrade. - BIOS downgrade is not allowed if user has enabled BIOS secure boot. (All customer setting will be lost also if downgrade to previous BIOS release.) - Backup BIOS region is also required to be updated to prevent recovery failure (already covered in BIOS update nsh script file in release package). - There is downgrade hang risk if you don't follow above rules. Please refer to Grantley BIOS EPS 9.4.7 for more details of known side effects of UEFI secure boot. 40. BIOS R01.01.0009 will enable UEFI Secure Boot and include below limitations: - All customer settings saved in BIOS NVRAM will be lost after new BIOS upgrade. - BIOS downgrade is not allowed if user has enabled BIOS secure boot. (All customer setting will be lost also if downgrade to previous BIOS release.) - Backup BIOS region is also required to be updated to prevent recovery failure (already covered in BIOS update nsh script file in release package), please use release package to update BIOS. - There is downgrade hang risk if you don't follow above rules. Please refer to Grantley BIOS EPS 9.4.7 for more details of known side effects of UEFI secure boot. 41. There is security revision update in R01.01.0009, downgrade to previous BIOS with lower security revision would fail unless in recovery mode. 42. IFWI D0019 has supported UEFI Secure Boot(SR=V6.6) feature and included below limitations: - All customer settings saved in BIOS NVRAM will be lost after this new BIOS upgrade. - BIOS downgrade is not allowed if user has enabled BIOS secure boot. (All customer setting will be lost also if downgrade to previous BIOS release happening) - Backup BIOS region is also required to be updated to prevent recovery failure (Already covered in BIOS update nsh script file in release package), please use release package to update the BIOS. - There is downgrade hang risk if you don't follow above rules. Please refer to Grantley BIOS EPS 9.4.7 for more details of known side effects of UEFI secure boot. 43. BIOS D0019 - IFWI D0019 has supported secure boot feature, please follow item42 to update your SUT to D0019 firstly with its package scripts, then use D0024 IFWI package to update to D0024. 44. BIOS D0055 - This release is BDW aware BIOS candidate 1. Please refer below detailed info before usage. -In this release, BDW B0 Microcode is integrated and BDW A0 Microcode is removed due to space limitation. If you want to continue work with BDW A1, please keep use D0044. -In this release, sanity test is done with HSW processor and only basic boot is done with BDW B0. -SUT will hang 0xbf after downgrading bios from D0055(BDW code tree) to R0011/R0009(HSW code tree) randomly. Please try below recovery methods if you meet. --Offline flash to R0009/R0011 via HW programmer. --Set SUT to recovery mode to power on, then set it back to normal boot to see whether it is recovered. -New feature for BDW aware BIOS is added that showing up warning message when BDW CPU is populated. 45. BIOS D0070 - From D0070 BIOS, remove 'UpdateNvram' support under Normal Mode for iflash32 tool for security reason of SRA bios, it still can work under Recovery Mode if NVRAM clean up is really needed. 46. BIOS D0076 - Design change from D076 for to change default setting from to <10>. Need to press to see the new default string. 47. BIOS D0094 - Suggest to press 'F9' to load default if using the 'IOU Non-posted prefetch control' setup options in the first time. 48. BIOS D0107 – BIOS had added command line support to clean ITK customization settings with below notes. 1)Require iflash32 utility updated to support command line. 2)Run 'iflash32 -ccs' to clear ITK customization setting. After reboot to BIOS setup, need to press F9 to load default to see the clear operation. 49. If updating BIOS to R0013 or later version, it is required to 'load default' to make the new setup option 'Snooped Response Wait Time for Posted Prefetch' work. 50. Security revision upgrade on D0140, it will prevent BIOS downgrade via normal mode to previous version that with lower security revision, user can use BIOS recovery mode for BIOS downgrade 51. The BIOS R01.01.0018 included security fix and security revision upgrade. Once user upgrade BIOS to R01.01.0018, it will prevent BIOS downgrade to previous version that with low security revision, user can use BIOS recovery mode for BIOS downgrade 52. BIOS R0018 and D0140 have the same security revision, user can do normal BIOS update between them. 53. Security revision upgrade on D0163, it will prevent BIOS downgrade via normal mode to previous version that with lower security revision, user can use BIOS recovery mode for BIOS downgrade 54. iFlash32 need to upgrade to latest revision v14.0 build10 from BIOS D0163 55. iFlash32 need to upgrade to latest revision v14.0 build11 or later version if user want to downgrade BIOS from BIOS D0181 to earlier version 56. Old revision Iflash32 ,syscfg ,OFU utility, SELViewer, Sysinfo will lead to system hang on R0021 or further BIOS release. These utilities need to upgrade to latest revision iFlash32_V14_0_Build11, Syscfg_V14_0_Build15, OFU_V14_0_Build14, SELViewer_v14_0_Build18, Sysinfo_V14_0_Build18. 57. Security revision upgrade on D0229, it will prevent BIOS downgrade via normal mode to previous version that with lower security revision, user can use BIOS recovery mode for BIOS downgrade ================================================================================ KNOWN ISSUES/WORKAROUND ================================================================================ 1. Some BIOS features would be abnormal on the system first boot, do not perform any test on first boot. No issue if updating BIOS using capsule update. 2. Use "Iflash32 -rd" to load BIOS default when you upgrade BIOS from D332 or earlier version to D342 or later version need follow a DC off or global reset. Warm reset cannot clear some register setting and may lead to system hang in worst case. if you want to load BIOS default, please use "F9" in BIOS setup on next boot after BIOS update. 3. D422 TXT feature will not work on WBG B0 per ACM 0.83D NPW version not capable of debug signed WBG B0. 4. ME capsule update failed on BIOS D422, if you want to update ME FW, please upgrade to BIOS D437 first, and issue a system reset, then update ME FW on next boot. 5. Inphi chip DIMMs has compatibility issue, high failure rate to hang on POST during warm reboot cycle. 6. ITP scripts memory error injection failed on D508 due to RC code sync, sighting has be filed. 7. On WCP with BIOS D533, the PCIe card in triple PCIE riser slot1&2 would issue the PCIe fatal error, you will see system NMI halted. 8. If your system with one CPU installed and BIOS D508 or prior to it, it would hang on BIOS POST during boot. It's the known issue on non-Txt BIOS. D519 and later versions have no such issue since Txt capable. ================================================================================ FEATURES ADDED/REMOVED ================================================================================ 01.01.D231 ================================================================================ Add SATA Raid fix in WellsburgPkg [Grantley]HSD 2161829,Enable ME Version Display When QuietBoot disabled. HSD:2161743 C state Control page is grey out and cannot be operated WCP: disable multi thread MRC when NM enabled per WCP power on. HSD 2161811: The items " BMC Status" and "ME Status" are not ready in BIOS setup HSD: 2161796 The options of "Memory Mapped I/O Size" doesn't match the expected ones ================================================================================ D252 ================================================================================ No sighting: enable UC and fix A0 CPU bug to enter OS. Period SMI is disabled in OS- platform side change  Update Setup Hardware Validation page, add SATA test option Add new PlatformIDs display support in POST Screen when QuietBoot disabled. WCP GPIO Initialization Table Modified. no sighting: open memory ras. Fix SCT - HII Test\HII String Protocol Test fail UUID Support Fix issue that OA tool is blocked by Secured Set Variable API Add platform type support in setup vfr no sighting: add PTU update support. [KNP]DIMM slot information in setup utitlity does not match with KNP design no sighting: changed mem RAS setup string to maximum performance Fix UDT USB 2.0 debug hang after memory init CCB173, add setup page for HW validation request Support BIOS Region Lock [KNP]NIC information show error [KNP] PO hotfix - Fix I350 device is disappeared Add setup option "Extended ATR" Sync to Grantley IPC baseline 13D12 Add JPEG logo support Add Raid hot fix ================================================================================ D267 ================================================================================ iflash32- support CustomerID and multi mailbox command string Period SMI is disabled in OS- platform side change Remove legacy IDE mode. Simics checked failure Sync PCIe physical slot number patch from IP Clean stream Sync to Grantley IPC baseline 14D16 Update AMI legacy USB stack Update core for HiiDatabaseDxe and SetupBrowserDxe drivers Add IB info in NIC configuration Add setup option --- PFloor Tuning Add System Date Day in setup and RMM4 modify CR: Update HSX B0 QPI EParam table support [KNP] GPIO Setting ================================================================================ D288 ================================================================================ Changed 10G OpROM version to v2.3.08 CCB173 fully enabled for HWV test Secuirty lock register fix Sync to IPC baseline 15R03 Update ACM binary to v0.72 HSD: 2161752: It halts when SUT ping HOST, while HOST can ping SUT KNP Serial Port B setting should be hidden in serial port configuration page [KNP]ACPI for Mono BIOS ITK code completed Fix SMBIOS type 41 [KNP] CCB 188 x16 PCIe Bifurcation control implemented on KNP No sighting: set SPI side Quad mode when -G sku. Aztec CRB Enabling with EPSD BIOS ================================================================================ D308 ================================================================================ Update NIC OptionROM Disable BMC SMI enable to PCH workaround to solve Pioneer SATA DVD install Windows Server 2012 slow issue itk- add a new section to indicate the customization firmware volume size limitation Update thermal table to v0.6 CCB 192 enable boot mode change Sync to Grantley IPC baseline 16X10 Prevent UEFI optionrom dispatch when set boot mode to legacy ================================================================================ D321 ================================================================================ Update RSTe OptionROM to 3.8.0.1029 Apply hot fix for SMBIOS type 4 & 7 in GrantleySocketPkg Add SMBIOS type 4, 7 hot fix from BDE bios FIx BIOS not able to boot to Win2012 on WCP with A stepping CPU Improve EPSD_IIO_SETUP_TOOL compatibility issue for Windows 7/2008 32bit OS. Change InterruptRemap default value to diabled. PCIe RAS feature enabled ================================================================================ D332 ================================================================================ Enable CLTT support Update system SSID/SVID and fix PCH devices SSID/SVID break by reference code Add ESRT II legacy OptionROM support Beta ME 03.00.03.688 integration ================================================================================ D342 ================================================================================ Update AMI Restrict Package to 0009 change "Cluster On Die" default value to follow EPS 0.6 Fix USB KB response slow, hotkey hard to press Fix sSATA OPROM not dispatch correctly Grantley ME setting updated on 688 version Sync to Grantley IPC baseline 16X12 disable C6 for random Windows blue screen after 30 minutes idle CPU L1 and L2 Cache information not follow EPS0.60 ================================================================================ D357 ================================================================================ Beta QRC 18R02 sync CCB210: Add password Status Query SMI Interface Remove ACPI S1 support Per Marketing requirement(ZBBed). ================================================================================ D372 ================================================================================ CWP: Create CWP BIOS build profile to generate CWP 16MB ROM CSM16 upgrade from AMI to solve DOS unstable issue ================================================================================ D389 ================================================================================ Sync to Grantley IPC baseline 19R01 Merge beta hotfix ME 695 for WCP beta build with WBG B1 ================================================================================ D406 ================================================================================ CWP PO BIOS support Beta2 ME FW 03.00.04.459 integration WCP powerville 1G NIC sku PO BIOS support +++++++++++++++++++++++++++++++++++++++++++++ ================================================================================ D422 ================================================================================ Integrate Grantley production signed ACM 0.83D for Txt support on WBG B1. Enable Taylor Pass BIOS support. Sync to Grantley IPC baseline 20R04 with HSX C0 support ================================================================================ D437 ================================================================================ Sync to Grantley IPC baseline 22R00 AMI USB stack sync to Central Park Core ================================================================================ D458 ================================================================================ Sync to Grantley IPC baseline 23R02 ACM 1.00PC integration Implemented CCB 185 on Grantley - Expose ability to set PCIe max speed per IOU Implemented CCB217- Rename RMM NIC Implemented CCB223 - RAID static boot order ================================================================================ D473 ================================================================================ Sync to Grantley IPC baseline 24R00 PCIe SSD AIC support on Cottonwood Pass ME FW PC version integration - 03.00.05.382 ================================================================================ D487 ================================================================================ Sync to Grantley IPC baseline to 25R01 ================================================================================ D508 ================================================================================ Sync to Grantley IPC baseline to 27R03(PC2 RC 0.96) ================================================================================ D519 ================================================================================ PV ME integration 03.00.05.402 ================================================================================ D533 ================================================================================ Sync to Grantley IPC baseline to 31R04(PV RC 1.00) ================================================================================ D545 ================================================================================ ACM upgrade to version 1.10 PV NPW CCB 194- Add new setup item for "Pcie correctable error logging" control and set to disabled in default. CCB255 Request is to enable WCE for WCP & CWP ================================================================================ D556 ================================================================================ Network setup option naming rule under UEFI mode was enhanced ================================================================================ D569 ================================================================================ Sync to RC 1.01 ================================================================================ D584 ================================================================================ Sync to RC 1.02 ME FW PV2 03.00.06.267 integration BIOS setup browser update to ver 2.0 CCB#257 Remove UEFI ESRT2 driver ================================================================================ D592 ================================================================================ Selective sync to RC 1.03, ME FW update to 03.00.06.274 PW ACM and SINIT 1.10A integrated ================================================================================ R01.01.0002 ================================================================================ [Security] Fix variable Fuzzy failure under OS Sync CRB BIOS PRT fix to remove the RT attribute for certain variables Remove the setup options for lock bit control, ensure no mechanism can bypass lock Upgrade security revision ================================================================================ R01.01.0003 ================================================================================ Fix the vulnerability on BIOS SMI Get/Set variable interface which would cause malicious program to read/write SMRAM. ================================================================================ D627 ================================================================================ Enhance the SMI GetVariable interface for security. Update ME to SPS_E5_03.00.06.277.0_PV2-G_WBG_REL Some HSW CPU would CATERR when we enable PCIE hotplug function MR5:4988158: HSX Clone: [Lenovo] System hangs at 0xBF with uncorrectable found at HA and iMC when doing warm reboot cycle and lockstep mode enabled ================================================================================ D633 ================================================================================ Fix the vulnerability on BIOS SMI Get/Set variable interface which would cause malicious program to read/write SMRAM. ================================================================================ R01.01.0004 ================================================================================ uCode 0x2A integration Update ME FW to SPS_E5_03.00.07.114.0_MR1-G_WBG_REL ================================================================================ D660 ================================================================================ CCB 246PCIe AIC SSD hot plug BP1.0.1.4 and CP1.4.2 core updates CCB 9998 Need Method to Enabled and Disable Home Snoop, Early Snoop in BIOS setup CCB 261 - Enable/Disable MCE SMI by setup option Support new Twiville IOM BKC 22 integration, included uCode 2B and RC 1.07 ================================================================================ D670 ================================================================================ CCB 9996: Create several new setup options to control and change np_pf_disable_global_iou0/1/2 CCB 9999: Performance enhancement (PCIe BW - writes) for non-cache aligned linear writes TPM 2.0 driver enabled BKC 24 integration ================================================================================ D683 ================================================================================ Remove B0 stepping uCode BKC 27 integration, RC 1.10, uCode 0x2D CCB 273: QRE: EPSD100244362 Reset after CATERR leaves system in a hung state" is open for annotation CCB 279: Support for 4X4 PCIe bifurcation support on a X16 PCIe Slot Update ME to SPS_E5_03.00.07.145.1_PLR5-G_WBG_REL ================================================================================ D691 ================================================================================ Grantley RC sync to V1.11 [Update ME toSPS_E5_03.00.07.154.0_PLR6-G_WBG_REL] ================================================================================ D001 ================================================================================ RC sync to V1.61 release ================================================================================ D002 ================================================================================ RC sync to V1.70 release ================================================================================ D003 ================================================================================ RC sync to V1.71 release ================================================================================ D004 ================================================================================ RC sync to V1.72 release RC sync to V1.73 release ================================================================================ D004 ================================================================================ RC sync to V1.80 release =============================================================================== Issues Fixed ================================================================================ ================================================================================ D199.1 - WCP PO build ================================================================================ 1. WBG B0 and HSW B0 hot fixes. ================================================================================ D224 - WCP Alpha and KNP PO build ================================================================================ 1. Workaround for system hang when DIMM populated on CPU socket2 DIMM slot issue 2. Workaround for PCIe device can't be detected when populated on riser slot 2 3. Integrate I350 opRom for Kennedy pass ================================================================================ D231 ================================================================================ ITK driver init infrastructure capsule change to add ITK build time FV support MemorySubClass need 5S to finish Add SATA Raid fix in WellsburgPkg The first MFG mode boot should clear variables like Conout No sighting: disable no-TSOD DIMM [KNP]Update NIC opROM to I350 [Grantley] Set PcdPlatformBootTimeOut to 0 from 10 for saving Boot time. [Grantley] Enable Boot Performance Measurement. ================================================================================ D231.1 ================================================================================ [KNP] PO hotfix - Fix I350 device is disappeared ================================================================================ D252 ================================================================================ EPSD100236024:d244 debug mode and mfg jump set, very little info dumped Fix EPSD100023732 Auto Recovery to backup BIOS image defeat during POST EPSD100023825:Second CPU not detected even with two CPUs installed. EPSD100023769 Boot the system to Windows(with SAC console) while a Console Redir Fix [EPSD100023749]Backup BIOS can't be updated in EFI, and NOT show Flash Backup BIOS updated message EPSD100023765,The quiet boot screens should not displayed when console redirection is enabled, but POST information isn't displayed. Fix issue:[EPSD100023710]ME version NOT changed after flash with D231_ME.cap EPSD100023705, In manufacture mode during post, should display manufacture mode message, but there is not show. EPSD100023770,Post Information don't have Primary BIOS or Backup BIOS ID version. EPSD100023743:BIOS SETUP NIC configuration is blank. EPSD100023753/EPSD100023738: fix IDE native mode can't install OS. EPSD100023777/EPSD100023778/EPSD100023779: dual video issue. EPSD100023787 CMOS clear BIOS setup Date is 01/01/2012, But it should be 01/01/2005 EPSD100023722:Memory RAS Mirror Mode System hang up, POST Code LED show "B7" EPSD100023721 Memory RAS Lock-Step Mode System hang up, POST Code LED show "4F [EPSD100023716: [MIC BIOS] System no memory POST Code LEDs show 0xB0, based on EPS 0.3, it should show 0xE8.] ================================================================================ D267 ================================================================================ [EPSD100023852][WCP don't support S3, but "powercfg -a" list windows supprt S3] [WCP]EPSD100023896:SMBIOS_Type 0 Table Entry failed items. [WCP]EPSD100023897: SMBIOS_Type 2 Table Entry failed items. [WCP]EPSD100023900: SMBIOS_Type 8 Table Entry failed items. [WCP]EPSD100023901/911: SMBIOS_Type 10/41 Table Entry failed items. [WCP]EPSD100023902: SMBIOS_Type 12 Table Entry failed items. [WCP]EPSD100023903: SMBIOS_Type 16 Table Entry failed items. [WCP]EPSD100023906: SMBIOS_Type 24 Table Entry failed items. EPSD100023733,Recovery BIOS after corrupting BIOS and SUT reboot.NOT show prompted text display in POST diagnostic from Primary area. EPSD100023753/EPSD100023738: fix IDE native mode can't install OS. EPSD100023776:SATA and sSATA configuration have HDD lose issue. EPSD100023828 BIOS SETUP, System date year field can be change less than 2005 EPSD100023861 and EPSD100023949: ACPI_MSCT table failed items EPSD100023914: SMBIOS_Type 20 Table Entry failed items EPSD100023919 BIOS does not meet INTEL DFT rule 1629 in manufacturing mode EPSD100023919,disable Splash Screen when MFG mode to follow DFT rule 1629. EPSD100023980/EPSD100023985/EPSD100023986: RAS hang issue after change DIMM EPSD100024013: fix no 02 SEL log when AC boot. EPSD100024014: fix RAS SEL log error from RAS mode to independent mode. EPSD100024018 System emits five short consecutive beeps and fails to boot withou EPSD100024032 PXE boot not work EPSD100235993 : update WCP & KNP PCIe physical slot number EPSD100236099: "Set Admin Password" and "Set User Password" SMI do not work in Windows and Linux EPSD100236128: FD region is erased after update UUID on CRB board EPSD100236159: enable IOAT function internally EPSD100236254 ResetReminderFeature will force customer to reset but cannot take real effect EPSD100236274: IPMI stack does not update SMBIOS type 38 correctly fix EPSD100023862 ACPI Extra table being reported in the BIOS ================================================================================ D288 ================================================================================ EPSD100236403 Cannot override memory speed in BIOS setup EPSD100024172: SUT doesn't boot to Boot Manager when press with "enter correct User password" EPSD100024207 Failed items in Setup Menu -> Main EPSD100024171 ACPI_FACS table FACS version is NOT correct with pets_package_10_3 - AcpiTest.efi tool EPSD100024159 ACPI SPMI table can't be dump in EFI Shell with pets_package_10_3 - AcpiTest.efi tool EPSD100024185: Onboard NICs can't boot to PXE in Legacy mode. EPSD100024242 Screen Blank for a span when entering Internal Efi Shell from Setup Menu -> Boot Manager Manu [WCP]EPSD100024203 - No FCoE 10GbE Option ROM option in BIOS Setup NIC configura EPSD100024084 Clone of: SMBIOS_Type 12 Table Entry failed items EPSD100024083 Clone of: SMBIOS_Type 10 Table Entry failed items EPSD100024188 Clone of: SMBIOS_Type 9 Table Entry failed items EPSD100024241 Clone of: SMBIOS_Type 8 Table Entry failed items EPSD100236448: RMT test log can't be output from serial port EPSD100236365: use unified SPI opcode and check 64K erase EPSD100024191: SMBIOS_Type 38 Table Entry failed items EPSD100024190 BIOS setup should not have USB3.0 Support item EPSD100023836:HWV test item,PCI-e "LNKSTS" register Bit 15:14 not equal to 0. EPSD100024120\EPSD100024124\EPSD100024173 - TCG legacy driver crashed EPSD100023872 ACPI_all OEM table ID fail items(update patch to fix boot win2012 fail) EPSD100236163: Set value of "Flow Control" as RTS/CTS SUT will black screen after reset it EPSD100024128 SUT will boot from recovery mode with 4 beeps [WCP]EPSD100023713:QPI Speed show Unknown in BIOS Setup. EPSD100023770 Post Information don't have Primary BIOS or Backup BIOS ID version EPSD100023872 ACPI_all OEM table ID fail items EPSD100023873 ACPI_all Creator ID fail items [WCP]EPSD100023913: SMBIOS_Type 9 Table Entry failed items. EPSD100236128: FD region is erased after update UUID on CRB board ESPD100024027: Console Redirection has garbage datas nostic at remote screen. ================================================================================ D308 ================================================================================ EPSD100024215: Failed items in Setup Menu->Advanced->Memory Configuration->Memory RAS Configuration EPSD100023866 : ACPI_MADT table failed items EPSD100236066: Grantely change dual video design with Add-in Video adapter EPSD100024214 : Failed items in Setup Menu -> Advanced -> Memory Configuration EPSD100024476 System AC/DC boot time are different from two boot EPSD100024363-SUT doesn't reboot when FRB2 watchdog timer is enable EPSD100024485:The system always reboot when entry OS. EPSD100024217&24218&24219:Failed items in Setup Menu->Advanced->Mass Storage Controller Configuration EPSD100024310: 64-bit PCI-E cards allocated with 32-bit MMIO. EPSD100024034: The sum of length in all SRAT structures not equal to DIMM size. EPSD100236650: BMC self test error on error manager EPSD100023811:fix ME error report under MFG mode. EPSD10002490: 'Quiet Boot' option is Enabled in BIOS Setup in MFG Mode. EPSD100024129:No SEL for BIOS update event, but BMC fw need fix together EPSD100024204: No Infiniband Option ROM option in BIOS Setup NIC configuration. EPSD100024454 - ACPI_SSDT table OEMID field incorrect EPSD100024125 Slim SATA DVD can't normal used EPSD100024221 : Failed items in Setup Menu -> Advanced -> PCI Configuration -> N EPSD100024404 BIOS not in MFG mode even MFG jumper is installed intermittently EPSD100024201:Pause Error Pause option can't be saved, it alway be "Disabled" EPSD100024249:Terminal type set to PC-ANSI/VT-UTF8,Console Redirection not work. EPSD100236183,Enable Iio PCIe AER SEL logging. EPSD100024402 Syscfg 13.0 fail to load BIOS default setting EPSD100024099-Clone of No option enable keyboardmouse to wake up the system from EPSD100024195:Press Power button in EFI,DOS,SETUP to shutdown SUT NOT function. EPSD100236597 - SUT should boot to BIOS SETUP boot manager while setting system EPSD100024228 : Update Terminal Resolution Size EPSD100024265: fix total memory is not correct. EPSD100024272 Error Manager doesn't display error message 0012 CMOS Date/Time not set after CMOS battery removal EPSD100024205 HEST,BERT,ERST,EINJ table are published when WHEA is Disabled EPSD100024289:"Current memory speed" frequency incorrect in POST screenr EPSD100236367: [INTERNAL] map DIMM out in case this DIMM don't have TSOD EPSD100024266 ACPI & Ethernet should not be recognized as removable device under Windows platform EPSD100023943 ACPI_all Creator ID fail items ================================================================================ D321 ================================================================================ Wildcat Pass EPSD100236871 Fix SUT does not boot to the second boot option while exit from the first option EFI shell EPSD100024571 [MIC-CDAD]Processor configuration options in BIOS are different w EPSD100023850 No option enable keyboard/mouse to wake up the system. EPSD100024387 Trigger SBE ECC during OS system in memory independent mode error items. EPSD100024391 Trigger MBE ECC during OS system in memory Mirror mode error items EPSD100024392 Trigger SBE ECC during OS system in memory Rank Sparing mode error items EPSD100024389 Trigger MBE ECC during OS system in memory independent mode error items EPSD100024641 Change the number of cores(Active Processor Cores), system hang POST code "78". EPSD100237096 Bios V308 can't boot in MFG mode with install MFG jumper EPSD100023978 Memory Population Mismatch, SUT can not boot, POST code show "17". EPSD100023832 BMC FW update takes around 50 minutes with fwpiaupd.efi utility EPSD100024663 Memory RAS Configuration change to Rank Sparing mode fail. EPSD100237062 System can't power on successfully after change some bios settings. EPSD100236972 iwVSS mem64.exe failed to start with B0 stepping processor & D308 BIOS - NUMA issue EPSD100236937 Linux Operating System Using BIOS Rev D308 Does Not Configure System For NUMA EPSD100236984 ?should be changed to (R) in Intel?Virtualization Technology EPSD100023903 SMBIOS_Type 16 Table Entry failed items EPSD100024057 MBE(software) can't trigger Windows WHEA-Logger error. EPSD100023779 Disable Dual Monitor Video,video can come from onboard video card and add-in VGA card(CPU Socket 2) in windows 2012 EPSD100024559 SOL enabled, BIOS NOT auto enable console redirection on Serial Port A. EPSD100024570 CPU VT-d "Interrupt Remapping" and "Pass-through DMA Support" items should keep Enabled and grayed out. EPSD100236575 Update BMC take more than 20 mins with USB interface under EFI. EPSD100024292 Memory Population Mismatch fail. EPSD100023737 Setting value changed to default value after BIOS Flash EPSD100023735 Admin/user password will be clear by flash BIOS D231.cap EPSD100023904 SMBIOS_Type 17 Table Entry failed items EPSD100023905 SMBIOS_Type 19 Table Entry failed items EPSD100023898 SMBIOS_Type 4 Table Entry failed items EPSD100024431 [MIC-CDAD] USB Mouse can't work after entering SAS Module 'RMS25CB080' OpROM. EPSD100024326 Clone of: Failed items in Setup Menu -> Advanced -> Integrated IO Configuration EPSD100024334 Clone of: Failed items in Setup Menu -> Advanced -> USB Configuration Kennedy Pass EPSD100024615 Clone of: Trigger MBE ECC during OS system in memory independent mode error items EPSD100024616 Clone of: Trigger MBE ECC during OS system in memory Mirror mode error items EPSD100024413 BMC FW update should not take more than 3 minutes but it takes around 7 minutes EPSD100024404 BIOS not in MFG mode even MFG jumper is installed intermittently EPSD100024079 Clone of: SMBIOS_Type 4 Table Entry failed items EPSD100024085 Clone of: SMBIOS_Type 16 Table Entry failed items EPSD100024684 Clone of: Memory RAS Configuration change to Rank Sparing mode fail. EPSD100024187 Clone of: Disable Dual Monitor Video,video can come from onboard video card and add-in VGA card(CPU Socket 2) in windows 2012 EPSD100024617 No On Board Devices Information (Type 10) structure for onboard sSATA ports EPSD100024614 Clone of: MBE(software) can't trigger Windows WHEA-Logger error. EPSD100023995 Clone of: Setting value changed to default value after BIOS Flash EPSD100024086 Clone of: SMBIOS_Type 17 Table Entry failed items EPSD100024234 Failed items in Setup Menu -> Boot Manager EPSD100024216 Failed items in Setup Menu -> Advanced -> Integrated IO Configuration ================================================================================ D332 ================================================================================ EPSD100024721 Help Text of some items in Setup Menu -> Boot Maintenance Manager are not compliant with BIOS EPS 0.60 EPSD100024382 SBE or MBE injection(BIST) during POST under memory independent mode occur halt and show POST diagnostic code 0xB7(when beep code emit) EPSD100024384 SBE or MBE injection(BIST) during POST under memory Mirror mode occur halt and show POST diagnostic code 0xB7(when beep code emit) EPSD100024385 SBE or MBE injection(BIST) during POST under memory Lockstep mode occur halt and show POST diagnostic code 0xB7(when beep code emit) EPSD100024386 SBE or MBE injection(BIST) during POST under memory Sparing mode occur halt and show POST diagnostic code 0xB7(when beep code emit) EPSD100024744 [WCP-CDAD] SUT can't enter BIOS when USB configuration set USB 3.0 Support from "auto" to "enabled" EPSD100024428 [MIC-CDAD] Item for "Wake On Lan" is disappear in BIOS EPSD100024748 [WCP-CDAD] System reboot occur when ROC RMS25CB080(AP) and PCIe adapter- RS25SB008 (Gold card) are both plug in EPSD100024634 System cannot boot into DOS via an SOL session. EPSD100024753 [CDAD]HDD info incorrect in BIOS SATA/sSATA AHCI controller. EPSD100024754 Clone of: [CDAD]HDD info incorrect in BIOS SATA/sSATA AHCI controller. EPSD100024654 SOL session can not enter into OS, but the BIOS POST screen display as expected EPSD100236908 [INTERNAL] prepare beta ME image. EPSD100024530 System can not resume on AC Power Loss by BIOS options: Last state EPSD100024330 Clone of: Failed items in Setup Menu -> Advanced -> Mass Storage Controller Configuration -> AHCI Capable Controller 2 Configuration EPSD100024328 Clone of: Failed items in Setup Menu -> Advanced -> Mass Storage Controller Configuration -> AHCI Capable Controller 1 Configuration EPSD100024847 [WCP-BIOS] The mount of SMBIOS Type 16/Type 17 tables in a platform. EPSD100024553 [MIC-CDAD] Console Redirection has garbage at remote system terminal screen during SUT warm boot . EPSD100024571 [MIC-CDAD]Processor configuration options in BIOS are different with EPS Spec EPSD100024576 [MIC-CDAD] Redhat 6.4 & SLES11 SP3 OS have EHCI BIOS handoff failed in dmesg. EPSD100236507 SUT cannot boot up while triggering SBE ECC error EPSD100024217 Failed items in Setup Menu -> Advanced -> Mass Storage Controller Configuration EPSD100024234 Failed items in Setup Menu -> Boot Manager EPSD100024218 Failed items in Setup Menu -> Advanced -> Mass Storage Controller Configuration -> AHCI Capable Controller 1 Configuration EPSD100024219 Failed items in Setup Menu -> Advanced -> Mass Storage Controller Configuration -> AHCI Capable Controller 2 Configuration EPSD100024229 Failed items in Setup Menu -> Server Management -> BMC LAN Configuration EPSD100024810 Setup Menu -> Advanced is not compliant with BIOS EPS 0.60 EPSD100024814 Setup Menu -> Advanced -> Power and Performance -> CPU C State Control is not compliant with BIOS EPS 0.60 EPSD100024821 System will auto reboot during flash BIOS in Windows(OFU) and boot into BIOS Recovery Mode EPSD100024816 Setup Menu -> Advanced -> QPI Configuration is not compliant with BIOS EPS 0.60 EPSD100024834 Setup Menu -> Advanced -> PCI Configuration -> NIC Configuration is not compliant with BIOS EPS 0.60 EPSD100024840 Setup Menu -> Security is not compliant with BIOS EPS 0.60 EPSD100024835 Setup Menu -> Advanced -> PCI Configuration -> PCIe Port Oprom Contorl is not compliant with BIOS EPS 0.60 EPSD100024837 Setup Menu -> Advanced -> Serial Port Configuration is not compliant with BIOS EPS 0.60 EPSD100024839 Setup Menu -> Advanced -> USB Configuration is not compliant with BIOS EPS 0.60 EPSD100024842 Setup Menu -> Boot Maintenance Manager -> Advanced Boot Options is not compliant with BIOS EPS 0.60 EPSD100236866 TPM option will hide while enable TXT option EPSD100024848 [WCP-BIOS] SMBIOS type 4 show incorrect socket designation EPSD100024610 Clone of: SBE or MBE injection(BIST) during POST under memory independent mode occur halt and show POST diagnostic code 0xB7(when beep code emit) EPSD100024790 Serial Port A, B set Legacy OS Redirection Enabled and then boot to DOS, remote terminal don't show. EPSD100024669 QPI Link Frequency is shown "Unknown GT/s" when install 1 Processor EPSD100237161 Memory voltage margining in BIOS setup doesn't work EPSD100024809 Setup Menu -> Main is not compliant with BIOS EPS 0.60 EPSD100237182 Only half the memory shows as available when set to Sparing EPSD100024692 Trusted Boot(TXT) run txt-stat utility fail in tboot/Linux Live image. EPSD100110675 WCP does not boot with Micron/TI DIMMs at 1333 EPSD100024710 Memory size in?IOS information Screen?not match when insert the memory ================================================================================ D342 ================================================================================ EPSD100024927: SMBIOS_Type 8 Table Entry failed items_connector info not mtach. EPSD100024778 SPD-failed DIMM populated in CPU 0 DIMM Slot 0 show POST code 0xB0. EPSD100237215: Kennedy_CPU Cache do not follow the standard of spec. EPSD100237094 The Data link layer link active bit doesn't be set after all NTB related register is set EPSD100024826 Memory Population Mismatch(A1 A3 B1), SUT can boot, but DIMM A1 A3 don't show "Disabled" in DIMM information EPSD100237310 Clone of: No SEL log after injecting PCIE correctable error EPSD100024393 Trigger MBE ECC during OS system in memory Rank Sparing mode error items EPSD100024742 [CDAD]Windows 2012 R2 can? find HDD after driver loading with RSTE Raid mode EPSD100236892 The value of "FRB-2 Enable" is always display "Disabled" by syscfg /d. EPSD100237239 System is not supporting SATA hot plug in RSTe mode on SATA or sSATA controllers EPSD100024849 SMBIOS Type 9 table is NOT compliance with SMBIOS spec EPSD100024850 No Onboard Devices Extended Information (Type 41) structure for onboard sSATA ports EPSD100237371 Some hidden HII variables under EFI shell become non-hidden under Windows EPSD100237274 The unavailable Intel(R) Dedicated Management Lan option. EPSD100024575 [MIC-CDAD] UEFI W2K8R2 install failed,black screen and can't boot from UEFI ODD. EPSD100236946 No SEL log after injecting PCIE correctable error EPSD100024921 SAS module(RMS25CB080) Link width is incorrect EPSD100024922 SMBIOS_Type 12 Table Entry failed items_J1F2 2-3 jumper. EPSD100024940 [WCP-CDAD] Hot key(Ctrl+I) is disappear during SUT post when set sSATA port to Raid mode EPSD100236927 10G PXE OpROM not getting disabled even when "Disabled" option set in BIOS EPSD100236998 PCI-X addin cards cause system to not boot to windows EPSD100024776 USB devices can be detected and functional in Windows after USB controller is disabled EPSD100024696 [CDAD] Can't install Windows with AHCI Capable 1 Configuration (SATA controller) set to enhanced mode EPSD100024813 Setup Menu -> Advanced -> Power and Performance -> CPU P State Control is not compliant with BIOS EPS 0.60 EPSD100237172 .INI file for BIOS saved through syscfg.exe shows 4 ports when there are 2 EPSD100237165 Disabling NIC 1 Controller does not disable NICs in OS EPSD100237166 Disabling both ports under NIC1 Controller will cause the BIOS to disable Nic1 Controller EPSD100237467 PCIe Ports 1A & 1B for CPU0 & CPU1 were configured incorrectly EPSD100237093 BIOS setup UI shows 4 NTB CPU socket options after load default in IIO configuration screen ================================================================================ D357 ================================================================================ EPSD100024825: Payload shown in advanced boot option AND fix a setup string error EPSD100236930: WCP EWS Shows wrong CPU information EPSD100237384 Insufficient time to enter RSTe OpROMs on SATA & sSATA controllers EPSD100024233 Failed items in Setup Menu -> Boot Maintenance Manager -> Boot Options -> Legacy CDROM/Hard Disk/Floppy/Network Device/BEV Device Order EPSD100024894 Boot SUT to DOS then Soft Reset, wait SUT boot to DOS again run "Get System Restart Cause?command, Verify byte 2 of the response is 03-power-up via power pushbutton instead of 5h - OEM EPSD100237319 Clone of: There's a WHEA log of onboard VGA when bootting to Windows 2012. EPSD100236997 Function keys pressed during post will intermitently be ignored by the system EPSD100024747 [WCP-CDAD] Sometimes keyboard cannot normal use in the RSTE OpROM. EPSD100024345 Clone of: Failed items in Setup Menu -> Boot Maintenance Manager -> Boot Options -> Legacy CDROM/Hard Disk/Floppy/Network Device/BEV Device Order EPSD100025019 [MIC-FW] BIOS show incorrect BMC version in system information EPSD100237612 Memory thermtrip not working EPSD100024906 [WCP-CDAD] After executing stress, there are several error messages in Linux OS event EPSD100237703 Payload shown in advanced boot option EPSD100024910 [WCP-CDAD] HDD Boot order can't be change as expectation under Enhanced mode. EPSD100236723 There's a WHEA log of onboard VGA when bootting to Windows 2012. EPSD100237656 SUT will always boot to EFI shell despite of changing boot order by SYSCFG under MFG mode. EPSD100237636 BIOS show incorrect BMC version in system information. EPSD100025058 [WCP-CDAD] After update BIOS D342, during POST the ME version show 1283.03.688 that is incorrect EPSD100237638 ITK578 customation size exceeds BIOS size limitation EPSD100236814 BMC EWS "Reset Server, Force-enter BIOS setup" feature is not working, server does not go into BIOS setup EPSD100024982 [KNP-CDAD] No Infiniband item inside NIC configuration with FDR baseboard in BIOS setting EPSD100024984 Total number of memory sticks are not match actual full DIMM inserted in winpira.log/memory information EPSD100024812 Setup Menu -> Advanced -> Processor Configuration is not compliant with BIOS EPS 0.60 EPSD100024496 [MIC-CDAD] WHEA error appears after completing the installation of Windows 2012 or W2K8R2 EPSD100237561 set HDD order/boot seuqence with syscfg, the change can't be taken effect after Globerest. EPSD100237215 Kennedy_CPU Cache do not follow the standard of spec. EPSD100237396 ACPI: Get ACPI Power State returned 0x01 not 0x00 when RHEL OS set to S1 EPSD100236930 WCP EWS Shows wrong CPU information EPSD100236929 Embedded 10GbE PXE OpROM running on Intel NIC add-in cards, which is incorrect behavior EPSD100236942 System does not respond when pressing function keys during post in the Console Redirection Console in the BWC/EWS EPSD100024650 Clone of: The SOL session will show some debug messages after SUT reboot. EPSD100024819 Setup Menu -> Advanced -> Memory Configuration -> Memory RAS Configuration is not compliant with BIOS EPS 0.60 EPSD100237506 [INTERNAL] add one SETUP item to control MRC debug message EPSD100023706 ACPI wake up from S1 fail, enter into S1 mode, system can? wake up from power button. EPSD100237081 ESC key has a very slow response through KVM when trying to stop .NSH file boot in EFI shell EPSD100237085 System cannot see redirected CDROM through KVM in IE 10 if UEFI is enabled EPSD100236390 [INTERNAL]Need to update quiet boot code due to core update with 14D16 IPC baseline. EPSD100023971 Open Java screen in EWS to remote control WCP system, during BIOS POST press F2 failed to enter BIOS setup menu. ================================================================================ D372 ================================================================================ EPSD100024872 BIOS can't create correct BEV type device when onboard RAID OpROM(INTEL(R) RSTe) RAID volume is created. EPSD100236640 Clone of: SUT cannot map the USB plate while using command "map -r" in EFI shell. EPSD100024724 Setup Menu -> Server Management -> BMC LAN Configuration "User Configuration" items are not compliant with BIOS EPS 0.60 EPSD100024409 Hard to enter BIOS setup by Pressing F2, USB KB may take several minutes to get functional after boot to EFI intermittently EPSD100023916 Clone of: Detected USB Devices NOT changed in BIOS setup "USB Configuration" by USB Hot Plug. EPSD100025012 [KNP-CDAD] Can NOT boot to iSCSI HDD even linux OS installation is successful. EPSD100237683 No SDR version shown directly after SDR version updated successfully EPSD100237224 System would not enter POST or BIOS when using mismatched processors EPSD100237254 The SDR version can't be showed in Bios setting EPSD100237385 Inserting USB key in front panel when at F2 setup menu causes system/keyboard/USB to hang EPSD100237255 USB keyboard don't work in EFI Shell and Bios setting. EPSD100024857 [WCP-CDAD] USB3.0 can't test under sles 11-sp3 x64 when set USB 3.0 from auto to enable EPSD100237381 Chassis: Set System Boot Options Clear CMOS does not work EPSD100237299 Syscfg V13.4 saved biosbmc config file some values are incorrect. EPSD100237376 BMC Web Console: SuSE 11 SP3 install via the Remote Console over the RMM NIC appear to hang after ~1hr with very little progress EPSD100025233 In MFG mode, the screen display from PCIE VGA card not from on board VGA. EPSD100238160 Console Redirection has no option ?erial Over LAN Enable ? EPSD100236465 System hangs when installing two different processors of the same family EPSD100023747 USB disk hot plug in and hot plug out can be crash UEFI system. EPSD100024481 PCIe_wake_function fail EPSD100237795 Sysinfo v13.2 capture incorrect value for boot mode under SuSE11.3 x64 EFI aware. EPSD100025124 [WCP-CDAD] Plug 2 same RAID Cards on SUT, system only detect one of OpROM. EPSD100025138 [MIC-BIOS] Addendum to EPSD100024358: [MIC-CDAD] System power on fail with 2U 3.5" Seagate ST4000NM0033 HD x8 EPSD100025134 [WCP-CDAD] NUMA option should be grayed out and set as Disable when only a single processor installed. EPSD100237915 DFT violation 1633, BIOS can't configure the on-board graphics controller as the boot device when the motherboard is in Manufacturing-Mode. EPSD100237966 [OFU V13.4]"flashupdt -i" can't display BMC and SDR version under Win2012R2 UEFI aware OS EPSD100236669 Only 4 of the 8 HSBP fault LED? turn on in EFI shell via CMDtool command EPSD100236577 Syscfg v13.0 build 2 get the hidden variable info failed. EPSD100236591 There is a very high probability that the SUT may hang with POST Code 0xc2 during POST on WCP with release mode. EPSD100237627 [internal]Found the reason why system time is 2016/5/16. EPSD100237668 BIOS not providing correct values to the SEL on an ME update EPSD100237518 [internal]Show the two items in blue so they can stands out EPSD100024841 Setup Menu -> Server Management -> Console Redirection is not compliant with BIOS EPS 0.60 EPSD100024825 Setup Menu -> Advanced -> PCI Configuration is not compliant with BIOS EPS 0.60 EPSD100237592 SLES11 SP3 can't be install under SATA IDE Mode if using TEAC DV-W524GS-100 Internal DVDRW EPSD100237594 SLES11 SP3 can't be install under USB if using Sumsung Portable DVD RW Model SE-208 EPSD100237600 Intermittent hang issue on RHLE6.5 EFI aware OS EPSD100238068 DIMM's slot number show incorrectly in EWS/ DIMM Information page. EPSD100025218 Plug in SPD failed DIMM, Error Manager does not report "856x SPD error". EPSD100238087 Bios show worng identified MFG mode information after DC cycle via "crtl+alt+del" or EFI shell command "reset" EPSD100236927 10G PXE OpROM not getting disabled even when "Disabled" option set in BIOS EPSD100024095 Clone of: EFI Shell command "reconnect -r" fail EPSD100237929 The DIMM information of SMBIOS type 17 is not correct EPSD100237963 [OFU V13.4]update FRUSDR occured Unknown Error issue under Win2012R2 UEFI aware OS EPSD100025088 [KNP-CDAD]Clone of: [WCP-CDAD] POST inforamtion indicate system has 2 SATA ports that mismatch with Baseboard SPEC EPSD100025089 [KNP-CDAD]Clone of: [WCP-CDAD] The POST always show the SAS/SATA Capable controller is disable EPSD100025228 There is no NIC OPROM loaded in POST with Twinville IOM is populated. EPSD100023855 EFI Shell command "reconnect -r" fail EPSD100025086 [WCP-CDAD] POST inforamtion indicate system has 2 SATA ports that mismatch with Baseboard SPEC EPSD100025087 [WCP-CDAD] The POST always show the SAS/SATA Capable controller is disable EPSD100238118 Twinville should be intel x540 in SMBios type 41 EPSD100237969 SUT can't continuously boot from boot options when enable boot option retry. EPSD100237971 Clone of: SUT can't continuously boot from boot options when enable boot option retry. EPSD100237972 The L3 Cache size is not correct on both BIOS Setup and SMBIOS. EPSD100025232 [MIC-FW] Can't enter SAS module configuration utility in BIOS D357 EPSD100237955 Clone of: The DIMM information of SMBIOS type 17 is not correct EPSD100237960 [OFU V13.4]update BMC occured Unknown Error issue under Win2012R2 UEFI aware OS EPSD100025161 The DIMM information of SMBIOS type 17 on channel C,D,G,H is not correct. EPSD100237997 After Updating to BIOS D357 DOS becomes unstable (intermittently) EPSD100025165 Clone of: [WCP-CDAD] NUMA option should be grayed out and set as Disable when only a single processor installed. EPSD100025166 [KNP-CDAD]Clone of: [WCP-CDAD] NUMA option should be grayed out and set as Disable when only a single processor installed. EPSD100025167 Clone of: The DIMM information of SMBIOS type 17 on channel C,D,G,H is not correct. EPSD100025182 [WCP-CDAD] After updte BIOS to D357, the system can't load OpROM of some PCIe Cards EPSD100025184 Clone of: The DIMM information of SMBIOS type 17 on channel C,D,G,H is not correct. EPSD100237087 Pressing a key through KVM to start Windows install is not detected EPSD100025198 There is no FCoE OPROM loaded in POST with Niantic IOM is populated. ================================================================================ D389 ================================================================================ EPSD100238564 QPI frequency select should be grayed out with 1 CPU installed in bios setup menu EPSD100237328 EFI SELView utility shows invalid version number for Version Change, FW Status event EPSD100024636 Check PCI device 8086/2F08 link width failed EPSD100024637 Check PCI device 8086/2F04 link width failed EPSD100024743 Setup Menu -> Advanced -> Integrated IO Configuration is not compliant with BIOS EPS 0.60 EPSD100024638 Check PCI device 8086/2F02 link width failed EPSD100024320 Clone of: Failed items in Setup Menu -> Advanced -> Power and Performance EPSD100025334 [WCP-CDAD] Sys can't boot normally when changing CPU config after flashing BIOS 'D372'. EPSD100238415 Jackson Beach UEFI Option ROM Control not executing using HII EPSD100025342 [KNP-CDAD]Clone of: [WCP-CDAD] Sys can't boot normally when changing CPU config after flashing BIOS 'D372'. EPSD100237684 KNP can not boot with two SAS PCIe card connected EPSD100238155 CPU C State Control has no option ?1E Autopromote? EPSD100238156 Power and Performance has no option ?orkload Configuration? EPSD100238152 Syscfg V13.7 cannot get boot order from BMC in UEFI Shell in UEFI boot mode EPSD100238157 Power and Performance still has the option ?ncore Frequency Scaling ? EPSD100238182 [INTERNAL] BMC ACPI state should be related to SETUP item ?lug and Play BMC? EPSD100025308 HWV-Address Parity Error Detection and Logging Failed EPSD100025331 Inject MBE via ITP2 on H2 in Independent mode fail. No DIMM fault LED and SEL got mismatched DIMM place. EPSD100025118 When disable NIC 1 Port 2 the "Onboard NIC1 Port1 MAC Address will show "NIC1 Port 2 MAC Addresses" EPSD100237909 failure in SR IOV compliance test EPSD100238532 setting in setup UI Console Redirection Legacy OS redirection is out of order EPSD100237864 Cannot boot OS from RAID Volume on Condado Beach ROC Module after upgrading to BIOS D357 EPSD100237923 HSBP Fault LED didn't show solid AMBER after turn on fault LED via comdtool EPSD100025355 [MIC-FW] SSB thermal trip not shutdown system EPSD100238449 WCP - Node Manager platform policy is not limiting power EPSD100238451 behavior of UEFI option ROM control is wrong under UEFI mode EPSD100238453 PCI bus device function wrong in setup UEFI option ROM control Ethernet controller EPSD100238456 Clone of: PCI bus device function wrong in setup UEFI option ROM control Ethernet controller EPSD100238467 When EIST is Disabled in BIOS SETUP, Energy Efficient Turbo is still displayed and settable EPSD100024570 CPU VT-d "Interrupt Remapping" and "Pass-through DMA Support" items should keep Enabled and grayed out. EPSD100024585 Failed to press F2 for entering BIOS Setup menu within SOL session. EPSD100238322 Clone of: The control relationship with NUMA Optimized and Cluster-on-Die is incorrectly. EPSD100024210 Failed items in Setup Menu -> Advanced -> Power and Performance EPSD100238316 BIOS Item : Direct Cache Access (DCA) value should be 'Enabled' and 'Disabled' EPSD100025298 can not turn off Hdd fault led by SGPIO EPSD100025300 [MIC-FW] No reading from sensor MTT CPU 1 & 2 EPSD100238327 One network port will be assigned three interface in EFI after load TCPIP EPSD100236814 BMC EWS "Reset Server, Force-enter BIOS setup" feature is not working, server does not go into BIOS setup EPSD100025196 [KNP-CDAD] Infiniband item in NIC configuration with FDR SKU doesn't meet the BIOS SPEC EPSD100238039 With SBO enabled, when remove a device, BIOS not move to next bootable device if it is the different type with the removed one. EPSD100238061 Power and Performance Profiles have not been implemented in BIOS Setup EPSD100024825 Setup Menu -> Advanced -> PCI Configuration is not compliant with BIOS EPS 0.60 EPSD100025277 Memory Lockstep mode can't boot up system after AC cycle, post code show "BF". EPSD100238281 Clone of: Syscfg /bbo to change boot order per second time to change and reboot into F2,find the boot order not be changed. EPSD100238287 Clone of: Power and Performance has no option ?orkload Configuration? EPSD100238288 Clone of: CPU C State Control has no option ?1E Autopromote? EPSD100238289 Clone of: Power and Performance still has the option ?ncore Frequency Scaling ? EPSD100238290 Clone of: Power and Performance has no option ?ncore Power Management ? EPSD100238278 Syscfg /bbo to change boot order per second time to change and reboot into F2,find the boot order not be changed. EPSD100238284 Clone of: Syscfg V13.7 cannot get boot order from BMC in UEFI Shell in UEFI boot mode EPSD100025287 [Internal] USB 2.0 port length (Eye Diagram) not programmed correctly. EPSD100238315 system can't boot to Oprom when it behind POST. EPSD100238209 megasr megaraid UEFI driver loaded even when ESRT2 not enabled - leads to incorrect driver health notification EPSD100238207 onboard VGA and addin VGA adapter items are shown in setup menu without addin VGA card EPSD100238226 Memory RAS configuration option could not be load default EPSD100238227 Clone of: Memory RAS configuration option could not be load default EPSD100238228 post screen comes out from addin VGA card when disable addin VGA card and enable onboard VGA EPSD100238229 post screen comes out from addin VGA card when enable addin VGA card and onboard VGA EPSD100238249 Kennedy_can not open raid optionrom console with RMS25PB080 EPSD100238088 Kennedy_VMware ESXI 5.5 can not enter into system after complete the installation EPSD100238103 Kennedy_ubuntu OS installation can not recognize RAID10 in both ESRT2 and RSTe mode EPSD100237937 Clone of: failure in SR IOV compliance test EPSD100025085 [WCP-CDAD] HSBP HD fault LED turn amber before POST screen. EPSD100238113 Syscfg v13.7 change BIOS boot order failed under MFG mode. EPSD100238114 Clone of: Syscfg v13.7 change BIOS boot order failed under MFG mode. EPSD100238120 Clone of: PowerVille should be intel I350 in SMBios type 41 EPSD100025152 Memory controller register programming check not match EPSD100025232 [MIC-FW] Can't enter SAS module configuration utility in BIOS D357 EPSD100238139 effect memory in setup menu and available memory in Windows resource manager is different EPSD100237957 UEFI table is shown in ACPI table EPSD100237964 Clone of: UEFI table is shown in ACPI table EPSD100237989 Suggest to hide/gray out pcie oprom control items of CPU 2, when only one CPU1 inserted. EPSD100237981 Some fail item about SMBIOS type 20 EPSD100237984 Clone of: Some fail item about SMBIOS type 20 EPSD100238005 Bios setup has Pcie port 00 OpROM control item showed of cpu socket 2. EPSD100025182 [WCP-CDAD] After updte BIOS to D357, the system can't load OpROM of some PCIe Cards EPSD100238023 UEFI Boot mode - incorrect behavior - HII menus for SAS controllers do not work EPSD100238024 UEFI Boot mode - incorrect behavior - HII menus for onboard RSTe controllers do not work correctly EPSD100024683 Via SOL session, click "Ctrl+I" can't go to RAID option Rom during boot. EPSD100237167 Disabled NIC1 port will disable the opposite port EPSD100238034 Post led flash once and then put out when SUT power on. EPSD100023954 Board SKU ID and revision ID Check problem for ITP tool ================================================================================ D406 ================================================================================ EPSD100024254 [MIC-CDAD] After Linux OS installation there are several abnormal events in system log (dmesg,/var/log/message) EPSD100238608 [Internal]F10 function failed working in legacy hard disk order EPSD100237370 Kennedy_Quiet boot can not work normally. EPSD100238152 Syscfg V13.7 cannot get boot order from BMC in UEFI Shell in UEFI boot mode EPSD100025435 B1 WBG chipset can NOT enter Manufacture Mode when Manufacture Jumper is connected. EPSD100238727 Two "End of post" event created when enter EFI shell. EPSD100238534 behaviors of items in setup UI USB configuration menu is wrong EPSD100025382 [WHQL-Alpha][KNP-CDAD] "TPM 1.2 TCG OS Interface Server Test-Run" test failure EPSD100237876 Kennedy_W2K12 R2 hypeV display black screen after installation under enhanced mode. EPSD100025355 [MIC-FW] SSB thermal trip not shutdown system EPSD100025359 [WHQL-Alpha][KNP-CDAD] "SMBIOS HCT" test failure EPSD100238535 Clone of: behaviors of items in setup UI USB configuration menu is wrong EPSD100024571 [MIC-CDAD]Processor configuration options in BIOS are different with EPS Spec EPSD100238316 BIOS Item : Direct Cache Access (DCA) value should be 'Enabled' and 'Disabled' EPSD100238323 Clone of: SLIC table is not found on AcpiTest EPSD100238324 Behavior after injecting PCIE uce error are wrong EPSD100238325 Clone of: Behavior after injecting PCIE uce error are wrong EPSD100025448 [Internal] Concurrent AER PCI-e errors cannot be logged correctly EPSD100238735 Enabled SOL in BIOS set without SOL session established, then reset SUT and boot to BIOS setup,Find console redirection is also enabled EPSD100025054 [KNP-CDAD] Hyper-V Server 2012 R2 hang during installation with Intel(R) Virtualization Technology enabled in the BIOS. EPSD100238791 Power and performance policy in BIOS setup not changing IA32_energy_perf_bias MSR EPSD100025218 Plug in SPD failed DIMM, Error Manager does not report "856x SPD error". EPSD100025273 [KNP-FW]SUT did not power down after heat the PCH Thermal sensor over upper critical temperature to trigger thermal trip. EPSD100237409 Activating Hyper-V in Windows Server 2012 64-bit R2 causes system to hang at Windows splash screen EPSD100238284 Clone of: Syscfg V13.7 cannot get boot order from BMC in UEFI Shell in UEFI boot mode EPSD100238301 The behavior of option "Add EFI Boot Option" is wrong according to eps0.65. EPSD100238304 Clone of: The behavior of option "Add EFI Boot Option" is wrong according to eps0.65. EPSD100025465 Setup Menu -> Main is not compliant with BIOS EPS 0.70 EPSD100025468 Setup Menu -> Advanced -> Power & Performance -> CPU P State Control is not compliant with BIOS EPS 0.70 EPSD100025469 Setup Menu -> Advanced -> Power & Performance -> CPU C State Control is not compliant with BIOS EPS 0.70 EPSD100025470 Setup Menu -> Advanced -> QPI Configuration is not compliant with BIOS EPS 0.70 EPSD100025466 Setup Menu -> Advanced -> Processor Configuration is not compliant with BIOS EPS 0.70 EPSD100025467 Setup Menu -> Advanced -> Power & Performance -> Uncore Power Management is not compliant with BIOS EPS 0.70 EPSD100238818 [INTERNAL]Integrate beta2 ME to BIOS EPSD100025483 Enable FCoE for 0x1528 device EPSD100238821 yellow mark in win2012 system device microsoft ACPI compliant power meter device in MFG mode EPSD100238823 Clone of: yellow mark in win2012 system device microsoft ACPI compliant power meter device in MFG mode EPSD100238839 DBOL failure in static boot order test in HDD AHCI mode with different HDDs EPSD100025503 Packaging request: Need updated ESRT2 OpROM included in latest Grantley BIOS EPSD100238886 [internal]Add Power/Performance Policy settings to BIOS Setup EPSD100238019 System still boot to Zepher when a bootable windows OS is present. EPSD100238659 WCP - Help text in BIOS Legacy Device Order pages is incorrect EPSD100238614 B1 WCP board can't boot up in MFG mode with Bios V372. EPSD100238615 The content in system information can't be updated on B1 board. EPSD100238640 [INTERNAL] Remove code that hidden SATA/sSATA device. EPSD100238656 OFU failed to update the Secondary BIOS area EPSD100238662 Need updated OpROM and UEFI driver for RSTe on SATA and sSATA on all Grantley BIOSes EPSD100024708 WHEA error appears on baseline test .log ID 19 "A corrected hardware error has occurred" ================================================================================ D422 ================================================================================ EPSD100025406 [SLV][KNP-CDAD]BIOS setting value changed to default after BIOS D372 Flash. EPSD100239036 [internal]except time and keywords ,the others should be grayout in user mode EPSD100239043 changed to log in as administrator when load default by F9 when log in as user EPSD100239044 Clone of: changed to log in as administrator when load default by F9 when log in as user EPSD100239051 LSI Corporation MPT SAS2 BIOS boots twice during system startup EPSD100025540 [MIC-FW] SPS FW internal error cause SUT power off unexpectedly during test EPSD100238949 [SLV_KNP]The return Max/Min/Efficient power value of Get Node Manager Power Characterization Range command is always zero. EPSD100238967 [INTERNAL]performance/acoustic mode set in BIOS EPSD100238972 [INTERNAL] support BIOS chip second source EPSD100238976 hard disk behavior abnormal in legacy disk order menu after disconnect HDDs with SBO enabled EPSD100238977 Clone of: hard disk behavior abnormal in legacy disk order menu after disconnect HDDs with SBO enabled EPSD100238981 WCP - After update of backup BIOS to D406 the system would not boot until AC power cycle EPSD100238161 The control relationship with NUMA Optimized and Cluster-on-Die is incorrectly. EPSD100238373 Get NM Power Characterization Range command is returning all zeros ; should return the min, max, and Efficient power draw values EPSD100023754 USB 3.0 drive read and write speed slow in windows and redhat. EPSD100237883 [INTERNAL]MERGE BIST feature to new code base. EPSD100025360 [WHQL-Alpha][KNP-CDAD] "PCI Hardware Compliance Test for Systems" test failure. EPSD100024299 (HWV)SATA SGPIO Function check failed EPSD100238783 [Internal] Press Esc key when payload enabled will hang in debug bios EPSD100238739 System not boot to Error manager with major error code detect. EPSD100238741 "Enter Setup" option under "Change boot order" have no function, and there is no define on EPS. EPSD100238767 boot order changed after disconnect HDD device EPSD100238769 Clone of: boot order changed after disconnect HDD device EPSD100239086 The hard disk order would not be changed after using syscfg /bbo on the second time EPSD100239116 [internal]Remove the fixed 1 second delay when wait for user to enter setup by F2 key EPSD100239127 Boot options not gray out with User permission. EPSD100024605 System reboot during entering into OS with C6 state enabled EPSD100238873 password error check failed message wrong pressing F6 EPSD100025521 Static Boot Order (USB boot priority disabled) - Different CDROM failed, don't follow EPS spec EPSD100025522 Static Boot Order (USB boot priority disabled) - onboard NIC failed, don't follow EPS spec EPSD100238888 Sysinfo V13.0 Build4 Two items displayed in F2 setup page missed in sysinfo_log.txt under win2k12R2 UEFI EPSD100025523 Static Boot Order (USB boot priority disabled) - USB HDD - Different HDD on same port failed, don't follow EPS spec EPSD100025524 Static Boot Order (USB boot priority enabled) - USB HDD - Different HDD on same port failed, don't follow EPS spec EPSD100238891 Sysinfo V13.0 Build4 "TPM State" related items displayed in F2 setup page missed in sysinfo_log.txt EPSD100238230 [INTERNAL] Add back BIST feature to D372 EPSD100238266 Clone of: The Data link layer link active bit doesn't be set after all NTB related register is set. EPSD100238262 TPM option disappear while enable TXT option on bios setup menu EPSD100238260 HW validation Test only option is setup menu-advanced EPSD100238803 Post led is off when SUT stay in BIOS setup EPSD100025570 [INTERNAL] SAS/IO module TXEQ value adjustment. EPSD100238883 [internal]Provid a method to customize BIOS string or version for customer EPSD100238885 [internal]Need 2 hidden options for BIOS setup to throttle the CPU. EPSD100238882 ME could not downgraded in B1 board EPSD100025527 IB Board can't load InfiniBand Option ROM during BIOS post EPSD100238927 SUT hung during establishing NTB link EPSD100238928 Clone of: SUT hung during establishing NTB link EPSD100238900 SUT halt after press esc during post after payload boot option enbaled by ITK EPSD100238921 The maximum length of a password is over 14 characters, can be set to 15-char. EPSD100238923 When invalid characters are present in the password entered, system not popup error message. EPSD100238963 BIOS SEL enteries Generator ID do not match EPS EPSD100238683 Need Powerville PXE rom integrated into BIOS for WCP EPSD100237094 The Data link layer link active bit doesn't be set after all NTB related register is set. ================================================================================ D437 ================================================================================ EPSD100238994 Clone of: Memory mapped I/O Size default vaule is different to EPS EPSD100238997 [internal] add a pop up window for F10 support in boot maintenance manager. EPSD100236647 LED of "NumLock"&"CapsLock"&"ScrollLock" malfunction EPSD100025552 Setup Menu -> Advanced -> PCI Configuration is not compliant with BIOS EPS 0.80 EPSD100239269 Iflash32 V13.3:Can't update ME when bios version is D422 EPSD100238858 Kennedy_display errors and hang up when verify the compliance for TXT. EPSD100239185 The scrubmask registers have not been set correctly after IBIST failure occurs during POST EPSD100238578 No ability to change maxreadreq and maxpayloadsize using the AMIBCP replacement tool called ITK EPSD100238643 The default Option Value of "Memory Mapped I/O Size" is not match on EPS and BIOS Setup. EPSD100238992 Memory mapped I/O Size default vaule is different to EPS EPSD100236648 Clone of: LED of "NumLock"&"CapsLock"&"ScrollLock" malfunction EPSD100237385 Inserting USB key in front panel when at F2 setup menu causes system/keyboard/USB to hang EPSD100237263 SOL not working - no BIOS POST messages, Oprom, EFI Shell appear on the SOL session EPSD100239271 [internal]The delay time is long when run platform.efi driver EPSD100239273 Clone of: Iflash32 V13.3:Can't update ME when bios version is D422 EPSD100239286 Make USB Devices Non-Bootable fail with D427. EPSD100023724 In EFI shell, keep press any key, but it only response one word in each time. EPSD100025429 Error manager has "9286" error code when enable "Serial Over LAN Enable" EPSD100025444 [MIC-FW] Change SOL settings in EWS not take effect after SUT reset EPSD100025611 B1 WBG chipset can NOT enter Manufacture Mode when TPM module is not attached to SUT. EPSD100025609 [Internal] WHCK UEFI Firmware Certification SetTime runtime service failed. EPSD100025355 [MIC-FW] SSB thermal trip not shutdown system EPSD100238478 SUT halt after plug in and out USB2.0 device in USB3.0 port under efishell EPSD100239124 Press F12 to boot from PXE not protected by password. EPSD100239126 Press F10 to boot from payload not protected by password. EPSD100239215 [CR6.0 Build7]The return value of CPU status is unknown when the CPU2 is not inserted EPSD100025561 [Internal] Sensor critical and SSB Therm Trip SEL not logged before PCH shutdown. EPSD100239158 [internal]create a new fast boot path EPSD100239393 [Internal]Some menus should not be shown in ITK root menu, it should be shown in deeper level menu. EPSD100025620 [INTERNAL] SAS module CTLE value adjustment. EPSD100238199 WCP - Adding or removing USB flash drive in EFI shell intermitently causes system to hang and reboot EPSD100238201 WCP - UEFI Network boot options are double the physical NIC ports on system EPSD100238887 SUT could not boot with MFG jumper using txt-bios cap file EPSD100238019 System still boot to Zepher when a bootable windows OS is present. ================================================================================ D458 ================================================================================ EPSD100236536 [INTERNAL]Enabling PDA will cause system hang when Micron 16GB 2RX4 DIMM was populated on the 2nd CPU Socket. EPSD100239715 Intel(R) Hyper-Threading Tech item in setup is enabled with CPU without Hyper-Threading support EPSD100239721 The option of Active Processor Cores couldn't be changed to the default value after F9. EPSD100239722 SAS Controller item is not showed in setup with SAS SKU Motherboard EPSD100239723 Microcode Revision turn to be N/A after changing the value of Active Processor Cores . EPSD100239731 [internal]Boot performance tuning:Enable E and F segments cache attribute to be write protected EPSD100239741 1GbE (Powerville) BB show iSCSI OpROM while it is disabled on BIOS Setup. EPSD100239119 Advanced boot option items could not be load default by clear CMOS with ITK modified capsule file EPSD100025236 [MIC-FW] Fwpiaupd V13.0 build 2 take too much time to update BMC within 3 minutes EPSD100025638 1GbE (Powerville) BB can't load onboard NIC OpROM. EPSD100025596 [KNP-CDAD]BIOS UEFI ESRT2 sSATA/SATA controller can't show the HDD information but it can show in build RAID environment EPSD100239269 Iflash32 V13.3:Can't update ME when bios version is D422 EPSD100239281 the WCP with BMC(14version) and KNP with BMC(10 version) beep randomly during post EPSD100238492 Clone of: [MIC-FW] Fwpiaupd V13.0 build 2 take too much time to update BMC within 3 minutes EPSD100025361 [WHQL-Alpha][KNP-CDAD] "WHEAHCT Logo" test failure. EPSD100025660 Packaging request for test BIOS: Need updated ESRT2 OpROM vA.14.02121826 included in latest Grantley BIOS EPSD100025651 Clone of: [WHQL-Alpha][KNP-CDAD] "WHEAHCT Logo" test failure. EPSD100025661 Packaging request for test BIOS: Need latest Grantley BIOS WITHOUT ESRT2 OpROMs included EPSD100239647 Sometimes screen will continue refreshing after entering bios setup if pressing F2 repeatedly during post. EPSD100239653 Type 17 for DIMM_x3 is showed in SMBIOS EPSD100239684 PCIE Slot String of Slot 5 in SMBIOS Type 9 is incorrect EPSD100025674 USB flash drive less than 530MB not detected as a floppy drive. EPSD100239686 Onboard NIC device name in SMBIOS Type 10 and 41 is incorrect EPSD100025668 [WCP-CDAD]The OpROM of Qlogic QLE2672 storage card can't work properly when MMIO is enabled EPSD100025669 [WCP-CDAD] The OpROM of LPe16002B pop up 'Firmware not ready' or disappear when MMIO is enabled EPSD100239083 Power Restore Policy setting intermittently changed to ?lways off ? EPSD100239198 [Internal]fix MRC fast boot on one CPU, then 2 CPU corner case. EPSD100239118 [internal]Enable MRC multi thread function EPSD100239120 Clone of: Advanced boot option items could not be load default by clear CMOS with ITK modified capsule file EPSD100238047 WCP - BIOS entry for UEFI Option ROM Control is confusing EPSD100239401 it takes too long time to update the BMC EPSD100239422 DFT violation 2122, The network card which is populated in the x4 slot in the third riser can't be identified as being installed on a riser card. EPSD100025691 EPSD100239506: [WCP] Separate RxRecipe table for CPU0 and CPU1 under MonoBIOS folder. EPSD100236965 System hang on post when enable "SMM Code Execution Range Checking" feature EPSD100239843 No SAS port connector information in SMBIOS type 8 on SAS SKU EPSD100239800 "Active Processor Cores" option lost in BIOS Setup. EPSD100025631 EPSD100025614: [Internal] WHCK UEFI Firmware Certification Test ?Graphic Resolution failed. EPSD100239818 New RSTe OpROM is available for inclusion in Grantley BIOS EPSD100239572 [Internal]Some items are duplicated in ITK Console Redirection Menu EPSD100239574 [Internal]Check RAS featue will not lead to system hang when enable "SMM Code Execution Range Checking" feature EPSD100239844 Show two serial ports connector information in SMBIOS type 8, but just one serial port on motherboard EPSD100239821 Clone of: Intel(R) Hyper-Threading Tech item in setup is enabled with CPU without Hyper-Threading support EPSD100239621 DIMM_x3 item is showed in Memory Configuration page of setup EPSD100239901 OFU13.7 could not update D437_ME.cap EPSD100025216 [WCP]: DIMM TSOD does not reflect real temperature simultaneously. EPSD100025571 Setup Menu -> Advanced -> Power & Performance -> CPU C State Control is not compliant with BIOS EPS 0.80 EPSD100238121 DFT violation 1592, BIOS images don't be released with a checksum in Speed. EPSD100239185 The scrubmask registers have not been set correctly after IBIST failure occurs during POST ================================================================================ D473 ================================================================================ EPSD100240050 [internal]The notify protocol for SetupDataFilter() function is not correct EPSD100240063 [INTERNAL] integration PC ME. EPSD100025726 QPI register setting implement to formal release EPSD100025727 USB register setting implement to formal release EPSD100240076 Samsung M386A4G40DM0-CPB 32G DIMM cannot detected with BIOS D458. EPSD100240102 Clone of: No extra PXE option is displayed in boot manager with added in Intel I350-T4 NIC EPSD100240104 Clone of: No extra PXE option is displayed in boot manager with added in Intel I350-T4 NIC EPSD100025731 Packaging request: Need updated ESRT2 OpROM vA.14.02121826 included in latest Grantley BIOS that has workaround for ESRT2 CDROM issue EPSD100236114 DDR4 not able to connect at 2133mhz at 1dpc EPSD100240295 Workload Configuration is still visible when disabled Enhanced Intel Speed Step. EPSD100239735 Set MMIO size to auto, dump the registers from Shell, the size is incorrect. EPSD100239738 Clone of: Set MMIO size to auto, dump the registers from Shell, the size is nicorrect. EPSD100239745 Processors not going in to pkg c6 state EPSD100024911 Boot time is in low performance which not meet KNP MTP1.02 test case requirement. EPSD100240027 PCIE slot 5 works at x8 instead of x16 on H12881 CWP depop SKU EPSD100240124 [internal]Current video mode should be checked firstly before set the video mode in BDS EPSD100240125 [internal]Change the StartupAllAPs() function from single thread to multi thread in PlatformCpu driver EPSD100240045 Clone of: AC/DC boot time don't reach the Grantley requirement EPSD100025715 SMBIOS Type 8 onboard NIC1, 2 Port connector information error. EPSD100025716 SMBIOS Type 8 onboard sSATA Port connector information error. EPSD100239971 system always reboot when connect a big pci device as MMIO size is set to auto. EPSD100025719 SMBIOS Type 8 "J4 - BMC SD Card", 'J2D1 - Mini SSD' should remove. EPSD100025723 OS Boot Watchdog Timer - Power off/Reset function fail. EPSD100240003 Characters on the home page of BIOS setup menu not alignment. EPSD100239884 AC or DC cycle the system, boot time for video display and OS login screen do not meet the requirements. EPSD100025713 Onboard LSISAS3008 link speed down to 5.0Gb during cycling test EPSD100239943 WCP - Add-in video not working during POST EPSD100238282 Driver Health is shwon in setup root menu when it shoud not be shown at all EPSD100238283 Clone of: Driver Health is shwon in setup root menu when it shoud not be shown at all EPSD100239400 [INTERNAL]PTU can't reach TDP under D436 EPSD100025692 SATA port register setting implement to formal release EPSD100240204 'J1F1 1-2: PLD program enable' not list on type 12 of SMBIOS. EPSD100240210 On 1GB board, the info of onboard NIC is incorrcor on SMBIOS type 10/41. EPSD100240215 [internal]F2 and other hot keys prompt should be showed earlier during post EPSD100240175 [Internal] CWP BIOS should integrate the SI setting EPSD100023883 AC/DC boot time don't reach the Grantley requirement EPSD100239629 [Internal] With Dimm on slot A1 and 2 CPU C0 installed, it failed with SPD read fail; with only 1 CPU, it can boot success. And replace 2 B0 CPU, it boot success. EPSD100025777 slot 4 PCIEX16 card can not be detect. EPSD100240338 Clone of: Processor C6 option not be set in CPU Performance/Balanced Power/Power mode EPSD100238122 System can? install OS from SATA CDROM with ESRT2 RAID mode. EPSD100239600 On F2 Setup Page,"Console Redirection" value will always be "Serial Port A" although change it to other value EPSD100024689 AC and DC cycle the system, boot times not meet the requirements for video display and OS login screen. EPSD100023941 Clone of: AC/DC boot time don't reach the Grantley requirement ================================================================================ D487 ================================================================================ EPSD100240322 Clone of: The system hung when set Static Boot Order to "Enabled" EPSD100240323 Clone of: Clone of: The system hung when set Static Boot Order to "Enabled" EPSD100240326 Processor C6 option not be set in CPU Performance/Balanced Power/Power mode EPSD100240302 The system hung when set Static Boot Order to "Enabled" EPSD100240361 Clone of: System POST will stop when 2 or more different PCIe RAID Storage adapers are populated EPSD100240362 Clone of: System POST will stop when 2 or more different PCIe RAID Storage adapers are populated EPSD100239691 when heat the memory ,the reading of DIMM therm margn will not change. EPSD100239692 SUT not power down but reset when thermal trip triggered. EPSD100025687 [KNP-FW]System can't shutdown in time after getting Memory thermal trip event. EPSD100025936 IDA is bootable while disable USB3.0 mode under Setup EPSD100237370 Kennedy_Quiet boot can not work normally. EPSD100239598 Console Redirection can't enable from BIOS setup. EPSD100239991 SOL for Baseboard Mgmt/ SOL for Baseboard Mgmt2/ SOL for Intel RMM value should't be change by press F9. EPSD100239992 Clone of: SOL for Baseboard Mgmt/ SOL for Baseboard Mgmt2/ SOL for Intel RMM value should't be change by press F9. EPSD100025606 [KNP-FW]After trigger each DIMM slot(A1-H1) thermal trip , Memory Thermal trip sensor location event is incorrect on EWS. EPSD100240023 UEFI SCT 2.3.1C tests some failures. EPSD100240419 The bios setup Screen will display on the left-top of the monitor when choose Force-enter BIOS setup to reset the SUT. EPSD100024102 Clone of: UEFI SCT 2.3.1 test result fail items EPSD100240543 Set fan profile to Performanc /acoustic, have no function, the value is not change by read from CMDtool. EPSD100240558 Test BIOS Request for ESRT2 and Wildcat BIOS EPSD100240560 Clone of: Set fan profile to Performanc /acoustic, have no function, the value is not change by read from CMDtool. EPSD100240135 Clear CMOS after enable SOL and Console Redirection, system will fail to boot up with 0x89, EPSD100240194 WCP - IDA - Does not boot with BIOS D437 and D458 EPSD100025739 Console redirection only displayed ?isabled?item when clear CMOS. EPSD100240465 WCP BIOS does not follow DFT Rule #2122 EPSD100239592 Sometimes Console Redirection item in setup is changed to Serial Port A after restart with F9 load default EPSD100239829 SUT emit beeps while booting windows 2012R2 after POST end EPSD100240487 Continue to restart after disabled Memory Mapped I/O above 4GB option with pulg in Xeon phi 7120A co-processor card EPSD100240505 Clone of: Continue to restart after disabled Memory Mapped I/O above 4GB option with pulg in Xeon phi 7120A co-processor card EPSD100240507 Clone of: Continue to restart after disabled Memory Mapped I/O above 4GB option with pulg in Xeon phi 7120A co-processor card EPSD100240517 [X] Wildcat Pass Beta BIOS not exporting "MP spec" section using Linux "hwinfo --bios" command EPSD100240349 System POST will stop when 2 or more different PCIe RAID Storage adapers are populated EPSD100240338 Clone of: Processor C6 option not be set in CPU Performance/Balanced Power/Power mode EPSD100240339 Clone of: Processor C6 option not be set in CPU Performance/Balanced Power/Power mode EPSD100025778 (HWV) Setup "Server Management" page show mismatch with Option value message. EPSD100023856 UEFI SCT 2.3.1 test result fail items EPSD100240408 Change some sttings from BIOS Setup then continue boot, system not remind for the un-saved changes. EPSD100240415 Clone of: System POST will stop when 2 or more different PCIe RAID Storage adapers are populated EPSD100240239 Onboard NIC Device string is incorrect EPSD100240177 Clone of: Clear CMOS after enable SOL and Console Redirection, system will fail to boot up with 0x89, EPSD100025942 Console Redirection cannot be enabled in BIOS EPSD100240230 Clone of: SUT emit beeps while booting windows 2012R2 after POST end EPSD100240252 WCP - Entering Server Management in BIOS intermitently returns error message EPSD100240278 WCP - Booting into BIOS using BWC/EWS causes display to shrink the video for BIOS interface EPSD100240682 Test BIOS request for LSI 3008 link margin failure ================================================================================ D508 ================================================================================ EPSD100240277 EWS: Actual DIMM speed different than reported on EWS DIMM INformation Page EPSD100025765 BMC Web console can't show all installed memory while RAS is setting mirror mode EPSD100240329 Remote terminal couldn't config the raid in console redirection mode . EPSD100240333 DIMM information show error when current configuration is Mirror EPSD100240331 Function keys do not work through SOL console session after system enters onboard RAID option ROM EPSD100241127 ESRT2 OpROM test BIOS for WCP EPSD100237707 SMBIOS type 17 maxium speed and current speed are set as the same value EPSD100240913 Test Debug BIOS for Grantley RSTe EPSD100240710 Mixing LRDIMMs and RDIMM, the system halted at POST Code 0x01, should have been POST Code 0xED EPSD100240426 WCP - BIOS only shows one NIC boot option when both onboard NICs are enabled for PXE EPSD100240738 WCP - BIOS D487 gives memory error beep code and will not boot EPSD100240764 Unique product code for each product SKU EPSD100238282 Driver Health is shwon in setup root menu when it shoud not be shown at all EPSD100239770 System hung at 0XDC with mixed speed-frequency L0 processor populated. EPSD100240572 Clone of: The SOL funtion status in BIOS setup mismatch withe EWS EPSD100240565 Clone of: The SOL funtion status in BIOS setup mismatch withe EWS PSD100240136 Win2008 can install successfully but cannot boot into OS in RMS25KB080 (IR)/RS3FC044 (IR) RAID10 mode EPSD100240140 Some DIMM Information shows "Installed&Failed" when different Memory RAS Configuration set EPSD100240205 Clone of: The DIMM size show 0GB when mirroring or lockstep mode. EPSD100240164 The DIMM size show 0GB when mirroring or lockstep mode. EPSD100240442 Clone of: DIMM information show error when current configuration is Mirror EPSD100239820 Clone of: System hung at 0XDC with mixed speed-frequency L0 processor populated. EPSD100240519 WCP Powerville - MAC for NIC 2 Not Showing Up Correctly in BIOS EPSD100240497 RS25GB008 optionROM can not display when populated it in PCIE slot1,2,3 and set sSATA to ESRTII mode EPSD100026047 Intel OEM HSBP PCI-e SSD BMC command not handling correctly. EPSD100240336 Clone of: Remote terminal couldn't config the raid in console redirection mode . EPSD100240337 Clone of: Remote terminal couldn't config the raid in console redirection mode . EPSD100240967 The boot order can't be changed through "syscfg /bbo" EPSD100240996 Clone of: Syscfg v13.11:can not change the boot device priority by command:syscfg /bbo EPSD100240976 WCP - System hangs at BIOS screen during post EPSD100240742 Zepher with Payload is not hidden if the normal OS is booted EPSD100240745 The IPMI command to force payload boot can not work EPSD100026101 Need Grantley test bios that includes attached OpROMs for ESRT2 1.42 program EPSD100240192 syscfg utility to configure TPM Administrative control BIOS setting for Grantley platform EPSD100025989 [ WCP-CDAD ] There are incorrect format error messages in Error Manager when triggering A6A0 error EPSD100240810 The Uncore Power Management displayed wrong when EIST disabled in one processer mode EPSD100240819 BIOS cannot boot after using CHIPSEC to fuzz "IIOSetupInfo" variable under OS runtime. EPSD100025993 FRB2 - Watchdog timer function fail. EPSD100240813 Video output is from add-in VGA card instead of onboard VGA when system in MFG mode EPSD100025995 SUT can't boot when the used hynix 4G RAM base on BIOS D487 version. EPSD100025996 InfiniBand IO Module present in BIOS not match EPS 1.0. EPSD100025998 [WCP-CDAD] There are extra characters in BIOS Processor configuration with 1x C0 CPU EPSD100240817 find PCIE Device does not fit in any defined classes with BIOS D487 EPSD100240241 Intel RAID Controller RS3FC044 (IR) cannot do RAID console in UEFI mode,show garbage in first POST screen. EPSD100240254 WCP - Power Restore Delay Value in BIOS is defaulting outside of available range EPSD100240822 Clone of: The Uncore Power Management displayed wrong when EIST disabled in one processer mode EPSD100240828 WCP ?pressing the NMI button on the front of Chassis you do not see an NMI asserted message. EPSD100240829 WCP ?When injecting a Surprise Link down PCIe error you do not see an NMI asserted message EPSD100240281 WCP - BIOS displays Installed&Failed for DIMMs that are used for spare or mirroring EPSD100240832 CWP - Slot 1 x1 Link Negotiation Fails with add in cards. EPSD100240834 CWP ?When injecting a Surprise Link down PCIe error you do not see an NMI asserted message. EPSD100241076 POST hang at PC 26 with Hynix DDR4 2133 HMA451R7MFR8N memory ================================================================================ D519 ================================================================================ EPSD100239318 High Power I/O (MIC) power limit policy does not limit power EPSD100241403 BMC Web Console: SmaRT-CLST SEL event showing "Invalid Offset for this SensorType" in event description EPSD100025994 Can't successfully get Node Manager High Power I/O power statistics. EPSD100240284 Mellanox reported increased latency up to 300n/s with Haswell vs. SNB/IVT Romley CPUs. EPSD100240314 WCP: Seeing Uncorrectable Errors for any PCIe Slot an Add-in Card is Plugged Into EPSD100240335 The system usually hang after reboot EPSD100239692 SUT not power down but reset when thermal trip triggered. EPSD100241098 System can't display on BIOS Setup and OS with DVI-VGA port. EPSD100241103 Disable Add-in VGA on BIOS Setup, viedo still out put from Add-in VGA port. EPSD100241449 WCP - Both Correctable and Uncorrectable ECC events are generated in SEL when single bit error is injected into DIMM. EPSD100241450 WCP - When ECC (either correctable or uncorrectable) events are generated in SEL, no DIMM information is provided. EPSD100026037 Trigger MBE(SW/HW) ECC during OS system in memory independent mode error items. EPSD100026038 Trigger SBE(SW) ECC during OS system in memory sparing mode error items. EPSD100240930 Clone of: Trigger SBE(SW) ECC during OS system in memory sparing mode error items. EPSD100240931 Clone of: Trigger SBE(SW) ECC during OS system in memory independent mode error items. EPSD100025429 Error manager has "9286" error code when enable "Serial Over LAN Enable" EPSD100026117 In MFG mode, the screen display from Riser 1 x16 PCIE VGA card not from on board VGA. EPSD100241256 CATERR is logged and UUT hang during power button/reset button cycling EPSD100241274 The DC cycling test halt with CATEER error occurs EPSD100241495 WCP - When injecting LCRC or Malformed TLP error into PCI-e card, SUT hangs and no event is logged in SEL EPSD100026168 PCIE HW error inject behavior is not as expected EPSD100241387 Clone of: syscfg 13.10:"P0" should not appear 2 times when connected 10 HDDs & 1 usb disk on WCP EPSD100241425 Boot device will lost from BIOS Setup permanent after disable from Boot Maintenance. EPSD100237644 CatErr during 12-hour DC power cycling test EPSD100025669 [WCP-CDAD] The OpROM of LPe16002B pop up 'Firmware not ready' or disappear when MMIO is enabled EPSD100240435 The behavior of VGA is different from the eps1.0. EPSD100240425 Upstream Error Injection for Correctable Errors Not Being Logged EPSD100240482 syscfg 13.10:"P0" should not appear 2 times when connected 10 HDDs & 1 usb disk on CWP board EPSD100241340 WCP - Console Redirection does not default to EPSD100241350 [internal]Lots VGA card don't display high resolution EPSD100026163 Boot device disppear from "Boot Maintance Manager" after device disabled EPSD100241385 Clone of: syscfg 13.10:"P0" should not appear 2 times when connected 10 HDDs & 1 usb disk on TLP board EPSD100240206 [Internal] CWP BIOS ME clock setting should align with CWP schematic EPSD100240501 Clone of: The behavior of VGA is different from the eps1.0. EPSD100240503 Clone of: The behavior of VGA is different from the eps1.0. EPSD100240927 Clone of: Trigger MBE(SW/HW) ECC during OS system in memory independent mode error items. EPSD100026039 Trigger SBE(SW) ECC during OS system in memory Lockstep mode error items. EPSD100240981 WCP - When RAID config is unhealthy the UEFI option ROM cannot be accessed EPSD100241016 No video output in OS with VGA card installed on Socket 1. EPSD100241021 The function of VGA is wrong. EPSD100026096 The VGA output are not normally EPSD100240786 Video device information is incorrect in SMBIOS type 41 EPSD100026000 [ WCP - CDAD ] System hang at POST and debug code is 0xC2h during DC cycling test EPSD100025997 Trigger SBE(SW) ECC during OS system in memory independent mode error items. EPSD100241070 "Add-in Video Adapter" list on BIOS Setup without Add-in VGA connect. EPSD100241072 Clone of: "Add-in Video Adapter" list on BIOS Setup without Add-in VGA connect. EPSD100025990 [VI HWV][TLP RAD]Run Reset button power cycling a couple times and SUT hang up in post code 62 EPSD100025944 When do the windows reboot cycle test, the SUT will hang on Windows booting screen EPSD100026207 Enable console Redirection , load defaults, but it? still ?erial Port A?or ?erial Port B? ================================================================================ D533 ================================================================================ EPSD100241676 (X) CPU MTT critical error, all fans faulted EPSD100241674 Clone of: P1/P2 MTT sensor status show in critical state in EWS after updating BMC from v0.20 to v0.21 EPSD100241441 WCP - SEL event not generated when MTT CPU1 and MTT CPU2 throw "Upper Non-Recoverable: Reading: 0" error EPSD100241664 Clone of: sysinfoV13.8: The captured value of "Add-in Video Adapter" in sysinfo_log.txt is not consistent with it on Setup Page EPSD100241668 Clone of: sysinfoV13.8: The captured value of "Add-in Video Adapter" in sysinfo_log.txt is not consistent with it on Setup Page EPSD100025763 BMC user with user privilege can generate diagnostics log EPSD100241665 Clone of: sysinfoV13.8: The captured value of "Add-in Video Adapter" in sysinfo_log.txt is not consistent with it on Setup Page EPSD100026257 [SLV][TLP-CDAD] Generate PSU fault on the active power supply cause SUT hang with CATTER EPSD100241688 [System Power] System will report CATERR when SMAlert# pull low during system CLST test EPSD100240872 WCP - In UEFI mode disabling NIC Controller 1 causes Windows 2012 R2 to give INACCESSIBLE_BOOT_DEVICE error EPSD100026205 Smbios type 41 'ServerEngines Pilot III' device type show ?evice Disabled? EPSD100241483 PCIe SSDs cannot be recognized correctly with production BIOS D473 EPSD100026204 Smbios type 10 & 41 lost "PCH Integrated sSATA Controller" information. EPSD100026208 NVRAM curruption with ITK modify BIOS didn't generate NVRAM log in Error manager. EPSD100241487 Integrate LAN OpROMs 18.8 to Grantley BIOS EPSD100024186 Clone of: PCI compliance test failed in linktraining with SUT EPSD100240707 HII issues with LSI IR cards - BIOS and LSI fw interaction EPSD100025595 [KNP-CDAD] ESRT2 UEFI BIOS version is not the same as BIOS release note written in D406 EPSD100240019 Clone of: PCI compliance test failed in linktraining with SUT EPSD100023789 PCI compliance test failed in linktraining with SUT EPSD100026113 PCIE Slot1: unused clock not disabled EPSD100026114 _PCIE Slot2 with reworked Combo Test Riser: unused clock not disabled EPSD100026115 PCIE Slot3 with reworked Test Riser: unused clocks not disabled EPSD100241502 WCP - IPMI command to boot from alternate device does not work in UEFI boot mode EPSD100241511 system locks when installing SLES in EFI mode with Nvidia K5000 EPSD100241505 Missing Option ROMs, can't setup RAID, won't allow OS install EPSD100026175 Driver Health String under sSATA shows only "Healthy" on Wildcat Pass EPSD100241572 BIOS UI - The help text of "AHCI Capable Controller 1/2" fail. EPSD100026224 SMBIOS Type 8 External Reference Designator string do not match TLP schematic EPSD100241420 Can not enter RS3YC Inergrated RAID by pressing "Ctrl+R" in sol console EPSD100241549 (X) BIOS Setup - Front panel lockout note -remove ?his option is not visible on S2600KI server board? EPSD100241551 (X)ESC key does not discard changes and exit BIOS setup EPSD100025979 [VI HWV][KNP RAD]USB KBD_Mouse random no function during AC power cycling windows boot. EPSD100240765 WCP - System Under Test Not Responding to C-Script CA Parity Error Injection EPSD100238272 System fails to boot with USB Floppy drive attached EPSD100241351 press F2 to enter the Setup is difficult in CWP board EPSD100241379 [INTERNAL]Request CSM16 extend PCI OptionROM shadow RAM range from 0xC0000-0xDFFFF to 0xC0000-0xE7FFF EPSD100241565 WCP - Static Boot Order does not remain after saving changes in BIOS EPSD100026221 [SLV][KNP-CDAD] Generate PSU fault on the active power supply cause SUT hang with CATTER EPSD100240128 SATA RSTe raid option ROM can not display during post when setting sSATA to RSTe mode on CWP EPSD100026225 SMBIOS Type 12 jumper settings do not match TLP schematic EPSD100241629 WCP - Fan speed does not change between Performance and Acoustic mode for baseboard H21573-200 EPSD100241638 sysinfoV13.8: The captured value of "Add-in Video Adapter" in sysinfo_log.txt is not consistent with it on Setup Page EPSD100240980 WCP - In UEFI Option ROM Control the Driver Health status for RAID controllers does noting when selected EPSD100241196 Full loading KNP / BCP system get master node (node1) hung if unplug one AC cord EPSD100026266 Need test bios for WCP with latest ESRT2 1.42 OpROMS EPSD100241717 Sometimes pressing F2 fail to enter BIOS setup via BMC KVM console ================================================================================ D545 ================================================================================ EPSD100242114 New RSTe OpROMs need to be included in Grantley BIOSes EPSD100241662 Clone of: Sysinfo V13.0 Build8 The captured "system information" values in sysinfo_log.txt are not correct EPSD100241661 Clone of: sysinfoV13.7: some items values can't be got in sysinfo_log.txt EPSD100241663 Clone of: Sysinfo V13.0 Build9 The captured "system information" values in sysinfo_log.txt are not correct EPSD100241687 Clone of: BIOS information screen do not match Grantley BIOS EPS_[1_00] EPSD100241087 SATA 3G IT eye is over expectation EPSD100026196 BIOS information screen do not match Grantley BIOS EPS_[1_00] EPSD100026199 Clone of: BIOS information screen do not match Grantley BIOS EPS_[1_00] EPSD100241525 Clone of: Sysinfo V13.0 Build8 The captured "system information" values in sysinfo_log.txt are not correct EPSD100241848 BIOS fails to boot up after disabling Serial Port A with SOL for Baseboard enabled EPSD100241849 BIOS fails to boot up after disabling Serial Port A with SOL for Baseboard enabled(WCPass) EPSD100241893 [Internal] The latest BIOS boot performance is lower compare to the older BIOS version EPSD100026357 Populate PCIE card in triple PCIE riser slot1, boot to BIOS setup, it was show NMI halted. EPSD100241876 Static Boot Order does not delete devices from Boot Order Tables EPSD100026362 Disabled onboard NIC1 controller, reboot to BIOS setup, it was show NMI halted. EPSD100026313 SMBIOS type_9 system slot SlotID did not consecutive EPSD100026338 [KNP-SLV] Disable CPU active cores via node manager command will not impact BIOS setting EPSD100237206 Sysinfo V13.0 Build1 The captured "system information" values in sysinfo_log.txt are not correct EPSD100238093 DIMM's asset tag show "Unknown" in EWS/ DIMM Information page. EPSD100241997 Some bits in SPI FRAP register are not set, which leave descriptor and PDR region unprotected. EPSD100026439 Smbios type 9 lost "J6B1 - Riser 2, slot 5" information. EPSD100240573 "Intel RMM" should be changed to "Dedicated Management NIC" in BIOS setup EPSD100238201 WCP - UEFI Network boot options are double the physical NIC ports on system EPSD100241575 Clone of: sysinfoV13.8: some items values can't be got in sysinfo_log.txt EPSD100241594 WHEA-47 logged under Windows but no error log under IBMC selviewer EPSD100241608 WCP - Tesla K20c GPU crashes SUT (console and/or graphical mode) EPSD100241626 the fru information in BIOS and in EWS are different EPSD100241927 The option of Onboard Video and Add-in Video be disabled synchronously with VGA Card istalled in socket1. EPSD100241965 Clone of: sysinfoV13.9: some items values can't be got in sysinfo_log.txt EPSD100026139 Related USB3 tests failed during Windows 2012 R2 WHQL test. EPSD100241745 LSI3008 Raid mode , Windows2008R2/2008hyperv/win7 cannot boot into OS, hang at ?tarting window bar? EPSD100241789 In BIOS setup, cannot configure BMC LAN IPv4 parameters if IPv6 is enabled EPSD100240689 sysinfoV13.7: some items values can't be got in sysinfo_log.txt EPSD100026294 [TLP-SLV] Disable CPU active cores via node manager command will not impact BIOS setting EPSD100241771 SDR version in BIOS setup is still F0.04 after switch to shipping SDR EPSD100241725 The fru information in BIOS setup is not consistent with EWS EPSD100240820 Grantley power optimization change EPSD100240252 WCP - Entering Server Management in BIOS intermitently returns error message EPSD100025955 Active core number can't react actual active core number set by NM ================================================================================ D556 ================================================================================ EPSD100026479 [Internal] After send IPMI command ,if BMC's feedback status is SUCCESS then no need waste time to stall and wait BMC ready EPSD100026480 Front panel status LED blinks amber when correctable ECC threshold is met in mirrored mode EPSD100026487 KNP -- inform BIOS to change the PCIe setting in formal BIOS for both NIC & PCH EPSD100026488 TLP -- inform BIOS to change the PCIe setting in formal BIOS for both NIC & PCH EPSD100026492 [WCP-CDAD] Boot from USB (ServerOperating System) failed when USB3.0 Support is Auto or Enabled EPSD100242135 DIMM behind of the ECC failed one still show installed &operational EPSD100026497 [Internal] Add platform PCI-e error mask hook routine in PlatformRas library. EPSD100026499 Wrong Word in Boot Options help text EPSD100026501 Wrong Word in USB Boot Priority help text EPSD100242146 Inject ECC error on slot2, failed DIMM not disabled on SMBIOS 17. EPSD100026504 Wrong Word in BMC DHCP Host Name help text EPSD100242308 Clone of: IASC 7.0.11 - Configuration BIOS Page Show ERROR "Get variable failed from SMI driver" EPSD100239749 Customers have lost the ablity to explicitly set the PCI max read request size via ITK. EPSD100242168 AHCI Controller Configuration option of sSATA show "Controller is disabled" with all sSATA ports are not installed EPSD100242389 Clone of: IASC 7.0.11 - Configuration BIOS Page Show ERROR "Get variable failed from SMI driver" EPSD100242456 Clone of: DIMM behind of the ECC failed one still show installed &operational EPSD100242425 [SLV_KNP] System can't boot to OS after disabled cpu core with IPMI. The issue found on CPU E5-2699 V3 C1. EPSD100026534 The status of "Remote Management Module" not match with EPS 1.1 EPSD100242228 Clone of: When remove a HDD/USB HDD from the boot list, the boot order is unexpected. EPSD100242275 sysinfo V13.10: The value of "Microcode Revision" in sysinfo_log.txt is not consistent with Setup Page value with two CPUs EPSD100242283 Clone of: Sysinfo_V13.10: The value of "Microcode Revision" in sysinfo_log.txt is not consistent with Setup Page value with two CPUs EPSD100242477 When the "Active Processor Cores" isn't "ALL" for CPU "E5-2699 v3 QGN1 C1", the SUT cann't boot into Win2K12R2 successfully EPSD100241563 Default for 'Performance' Policy is 'IO Sensitive' not 'Balanced' EPSD100026173 Driver Health Protocol (DHP) not working correctly on Wildcat Pass EPSD100242342 Clone of: sysinfo V13.10: The value of "Microcode Revision" in sysinfo_log.txt is not consistent with Setup Page value with two CPUs EPSD100242387 Clone of: IASC 7.0.11 - Configuration BIOS Page Show ERROR "Get variable failed from SMI driver" EPSD100026582 Need ESRT2 AHCI OpROM and UEFI driver integrated in latest Wildcat Pass BIOS for testing at Avago EPSD100242382 IASC BIOS page displays SMI error message and does not show Boot Order. EPSD100026449 [TLP-CDAD]Clone of: [KNP-CDAD]There is no IB IOM info in NIC configuration if plug IB IOM EPSD100242071 When remove a HDD/USB HDD from the boot list, the boot order is unexpected. EPSD100241822 when heat the DIMM, the Processor therm trip is tiggered EPSD100026344 After disabled Hyper-Threading, the SUT will reboot when boot to windows2012 r2. EPSD100241987 Characters number of user name and password in BIOS setup should keep same with EWS EPSD100242011 WCP Test BIOS Request - switch loading order of SATA and sSATA controllers and enable ports 4 and 5 on SATA ports EPSD100242026 Blank screen during POST in UEFI mode with quiet boot disabled. EPSD100026435 [KNP-CDAD]There is no IB IOM info in NIC configuration if plug IB IOM EPSD100242134 WCP - 82599EB 10 GB I/O Module is blank in boot order in UEFI mode EPSD100026554 Boot menu doesn? show OS PD as boot option in Intel Wildcat Pass (ESRT2 testing) EPSD100242297 [SLV_CWP] System suddenly Blue Screen Of Death when enter OS after disabled cpu core. EPSD100242305 IASC 7.0.11 - Configuration BIOS Page Show ERROR "Get variable failed from SMI driver" EPSD100241645 WCP - Front panel status LED blinks amber when correctable ECC threshold is met in mirrored mode EPSD100242296 Clone of: sysinfo V13.10: The value of "Microcode Revision" in sysinfo_log.txt is not consistent with Setup Page value with two CPUs EPSD100242268 Clone of: Inject ECC error on slot2, failed DIMM not disabled on SMBIOS 17. EPSD100242274 Clone of: Characters number of user name and password in BIOS setup should keep same with EWS EPSD100242280 iFlash32_V13.7: the output messages are different when run cmd "iflash32 -u D545.cap asdf" for 2 times. EPSD100240251 WCP - Secondary SATA info loading before Primary SATA info EPSD100242308 Clone of: IASC 7.0.11 - Configuration BIOS Page Show ERROR "Get variable failed from SMI driver" EPSD100242389 Clone of: IASC 7.0.11 - Configuration BIOS Page Show ERROR "Get variable failed from SMI driver" EPSD100242423 [Internal]Gen3Override uses wrong bus number to get cpu stepping EPSD100242351 IPMI Watchdog 2 initiated hard reset - Asserted EPSD100242387 Clone of: IASC 7.0.11 - Configuration BIOS Page Show ERROR "Get variable failed from SMI driver" EPSD100242382 IASC BIOS page displays SMI error message and does not show Boot Order. EPSD100242305 IASC 7.0.11 - Configuration BIOS Page Show ERROR "Get variable failed from SMI driver" ================================================================================ D569 ================================================================================ EPSD100242106 Ability to add or delete custom boot options in UEFI is no longer available. EPSD100242655 Can't set Dedicated Management LAN IP address in BIOS setup when RMM4 not installed EPSD100242656 Clone of: Can't set Dedicated Management LAN IP address in BIOS setup when RMM4 not installed EPSD100242658 Clone of: Can't set Dedicated Management LAN IP address in BIOS setup when RMM4 not installed EPSD100242681 RSTe PV 4.1 1047 OpROM Grantley Test BIOS EPSD100242635 "shutdown policy" function is abnormal EPSD100026501 Wrong Word in USB Boot Priority help text EPSD100026627 The Slot Designation String of SMBIOS Type 9 cannot match with silk screen on the riser card. EPSD100242595 Please implement the QPI setting into the official BIOS EPSD100026628 Clone of: The Slot Designation String of SMBIOS Type 9 cannot match with silk screen on the riser card. EPSD100242594 Syscfg_V13.14: The BIOS load default behavior is different between press 'F9' and issue command '/bldfs'. EPSD100242643 Bios D549 has no IP address info in the Dedicated Management LAN section EPSD100025935 dmesg has conflict log "conflicts with ACPI region" under RHEL 6.5 x64 OS EPSD100242424 [SLV_KNP]It can? take effective when disable cpu core Policy via ipmitool. EPSD100242225 ACM Error when Clearing TPM with TXT Enabled EPSD100242475 Cannot change the "Active Processor Cores" to 1 successfully in BIOS for CPU "E5-2637 v3 QGSP R2" EPSD100242512 PCIE Injection uncorrectable error failed EPSD100026610 Clone of: BIOS Setup UI does not to match with EPS1.1. EPSD100026601 BIOS Setup UI does not to match with EPS1.1. EPSD100242497 Some of the BIOS values are not loading when Loading User Default Values. EPSD100242514 Clone of: PCIE Injection uncorrectable error failed EPSD100242517 Clone of: PCIE Injection uncorrectable error failed EPSD100026615 Clone of: BIOS Setup UI does not to match with EPS1.1. EPSD100242545 Clone of: Cannot change the "Active Processor Cores" to 1 successfully in BIOS for CPU "E5-2637 v3 QGSP R2" EPSD100242767 SUT emit beeps while booting windows 2012R2 with UEFI mode after POST end EPSD100242286 [SLV CWP]It can? take effective when disable cpu core Policy via ipmitool. EPSD100241696 When enable SBO, the boot order will change when rename the RAID entry, if SBO is disabled, the boot order will not change when rename the RAID entry. EPSD100026676 Clear Admin/User password behavior fail EPSD100026677 Console Redirection load default failed. EPSD100242838 Clone of: Clear Admin/User password behavior fail EPSD100242816 FRB-2 Wachdog Timer doesn't work EPSD100242828 Missing dedicated management LAN configuration section in BIOS d556 ================================================================================ D584 ================================================================================ EPSD100026481 Cannot set turbo sync for all CPUs at the same time EPSD100242174 [SLV_KNP]Cannot set Turbo synchronization ratio to all CPU socket (byte 4 = 0xff).But it works well while byte 4 = 0x00 or 0x01 (socket 0, or 1) EPSD100242176 [SLV_TLP]Cannot set Turbo synchronization ratio to all CPU socket (byte 4 = 0xff). But it works well while byte 4 = 0x00 or 0x01 (socket 0, or 1) EPSD100239353 Node Manager Default Power Management profile incorrect EPSD100241402 WCP - Cannot set turbo sync for all CPUs at the same time EPSD100242248 Error occurred during warm-boot cycling EPSD100241769 there are OEM Reserved, SPS FW Health (#0x17) loges in dc cycle stress . EPSD100242942 Clone of: Syscfg_V13.16:load default bios setting didn't take effect by command:syscfg.efi /bldfs "" for boot order. EPSD100242944 Clone of: Syscfg_V13.16:load default bios setting didn't take effect by command:syscfg.efi /bldfs "" for boot order. EPSD100026717 Clone of: The "Set Fan Profile" value not match with EPS 1.10 EPSD100242989 New iSCSI OpROM to integrate into Grantley EPSD100026725 Need latest ESRT2 OpROM and UEFI driver embedded into latest Wildcat Pass BIOS for testing EPSD100026642 Intel_Hemosa Canyon_12G: PHY speed not getting set under manage link speed in HII EPSD100242660 CPU thermal sensor reading is not correct with latest BIOS(D519 and D533) EPSD100242140 CWP Pass CPU sensor reading not right with BIOS D533 EPSD100026737 SATA/eSATA IOBP Electrical Control Registers adjustment. EPSD100242744 No SBE log in BMC selviewer when correctable error occurred EPSD100242324 Set BIOS default causes all NIC ports in KNP system reset to the same MAC address EPSD100242343 The two NIC MAC address display the same information EPSD100026348 CATERR (TOR timeout) during MVL test with Samsung 32G LRDIMMs EPSD100026692 When install FCOE/X540 IOM, NIC Configuration will appear PXE 1Gb Oprom on Twinville MB EPSD100242882 New PXE OpROM ask for integration to solve the issue EPSD100026606 EPSD100241789 In BIOS setup, cannot configure BMC LAN IPv4 parameters if IPv6 is enabled EPSD100242904 iFlash32_v13.8:load default bios setting didn't take effect by command:iflash32.efi /rd "" for boot order. EPSD100242912 Clone of: iFlash32_v13.8:load default bios setting didn't take effect by command:iflash32.efi /rd "" for boot order. EPSD100242941 Syscfg_V13.16:load default bios setting didn't take effect by command:syscfg.efi /bldfs "" for boot order. EPSD100026715 The "Set Fan Profile" value not match with EPS 1.10 EPSD100026696 "User Configuration" items are not match with BIOS EPS 1.10 EPSD100242914 Clone of: iFlash32_v13.8:load default bios setting didn't take effect by command:iflash32.efi /rd "" for boot order. EPSD100242915 Clone of: iFlash32_v13.8:load default bios setting didn't take effect by command:iflash32.efi /rd "" for boot order. EPSD100242943 Clone of: Syscfg_V13.16:load default bios setting didn't take effect by command:syscfg.efi /bldfs "" for boot order. EPSD100242754 Setting BIOS default causes duplicate MAC addresses for all NIC ports in WCP system EPSD100242779 with LR-DIMM installed,before dimm therm trip event was triggered, Only DIMM therm high non-critical event asserted. EPSD100026679 When run the "Basic test" with gen3 PTC(Agilent U4305A), the tools report fail in "1 GB Mem32 and Various Mem32 Requests" item. EPSD100026749 Onboard NIC Type information string not match with EPS 1.11 EPSD100026734 Can not get enough information via user password under Setup menu. ================================================================================ D592 ================================================================================ EPSD100026734 Can not get enough information via user password under Setup menu. EPSD100026735 Clone of: Can not get enough information via user password under Setup menu. EPSD100243070 Enable "Console Redirection" without console cable connect, there will have 3 SEL log on every boot. EPSD100026751 [INTERNAL] WCP QPI CTLE settings for C1P0. EPSD100243085 Support LSI on the ESRT2 UEFI driver to Beta release EPSD100243118 Boot to BIOS Setup by user password, can't change user password/Time/date. EPSD100243130 Clone of: Boot to BIOS Setup by user password, can't change user password/Time/date. EPSD100243132 Copyright time is shown incorrectly duting POST EPSD100243121 Report error when build RSTe RAID volumn with UEFI mode EPSD100243278 Clone of: Syscfg V13.16: "syscfg /bldfs """ can't restore boot order to default one once it has been changed by "syscfg /bbo" EPSD100242532 SR-IOV does not show as enabled EPSD100243274 Syscfg V13.16: "syscfg /bldfs """ can't restore boot order to default one once it has been changed by "syscfg /bbo" EPSD100243277 Clone of: Syscfg V13.16: "syscfg /bldfs """ can't restore boot order to default one once it has been changed by "syscfg /bbo" EPSD100243281 Clone of: Syscfg V13.16: "syscfg /bldfs """ can't restore boot order to default one once it has been changed by "syscfg /bbo" EPSD100243139 Clone of: Boot to BIOS Setup by user password, can't change user password/Time/date. EPSD100243142 Clone of: Boot to BIOS Setup by user password, can't change user password/Time/date. EPSD100243155 Clone of: SR-IOV does not show as enabled EPSD100243157 Clone of: SR-IOV does not show as enabled EPSD100243158 Clone of: SR-IOV does not show as enabled EPSD100243195 (s)SATA RSTe HIIs reports "Create volume failed!" when trying to create RAID 0/1/5/10 volume in Grantley BIOS D584/D586. EPSD100237079 Need drive strength setting for QPI, DMI, USB, SATA EPSD100242696 [SLV_CWP]There have some "SmaRT & CLST" event logs when run DC_POWER_CYCLE.dat using ITAS 3.11.3. EPSD100242602 [SLV_KNP]There's unnecessary "SmaRT & CLST" event logs when run DC_POWER_CYCLE.dat using ITAS 3.11.3. EPSD100243053 Slot6 GPGPU card cannot be throttling at the system activate CLST EPSD100242785 [WCP, 750W]Sensor (#0xB2) CRITICAL event: SmaRT-CLST Stat reports it has been asserted/deasserted. EPSD100026685 [MIC-FW]There are some unexpect during DC cycle. ================================================================================ D599 ================================================================================ EPSD100242666 system will hang after update BMC fw many times under EFI shell on WCP EPSD100026492 [WCP-CDAD] Boot from USB (ServerOperating System) failed when USB3.0 Support is Auto or Enabled EPSD100243113 KB no response when warm reboot from OS when DIMM D1 populated EPSD100243459 BIOS Setup: Server Information Page --> "unknown" spelled incorrectly when BMC is in force update mode EPSD100243457 WCP: X540 IOM not showing up in the FCOE adapter list. EPSD100243362 CATERR caused by pressing the power button 25 seconds from power on EPSD100026775 TLP --implement this SI setting to BIOS formal release for QPI/USB/PCIe/DMI EPSD100242724 Clone of: system will hang after update BMC fw many times under EFI shell on KNP EPSD100242722 Clone of: system will hang after update BMC fw many times under EFI shell on TLP EPSD100243195 (s)SATA RSTe HIIs reports "Create volume failed!" when trying to create RAID 0/1/5/10 volume in Grantley BIOS D584/D586. EPSD100243373 Clone of: CATERR caused by pressing the power button 25 seconds from power on EPSD100243434 Clone of: CATERR caused by pressing the power button 25 seconds from power on WCP EPSD100242810 Clone of: system will hang after update BMC fw many times under EFI shell on CWP EPSD100243262 [X] F6 - F9 & F10 not working in SOL linux connection ================================================================================ R01.01.0001 ================================================================================ EPSD100026796 Setup Server Management Page , ?onsole Redirection?item not synchronize with SOL change. EPSD100243718 [SLV_CWP] Wording mistake in 'Legacy Network Device Order' interface. EPSD100243720 Clone of: [SLV_CWP] Wording mistakes in 'USB Configuration' interface of BIOS Setup. EPSD100026816 Setup menu display will be distorted after changing Console Redirection settings EPSD100243746 [SLV_TLP] Wording mistake in 'CPU C State Control' interface of BIOS SETUP. EPSD100243716 [SLV_TLP] Wording mistake in 'Legacy Network Device Order' interface of BIOS SETUP. EPSD100243747 [SLV_TLP] Wording mistake in 'CPU C State Control-C1E Autopromote' interface of BIOS SETUP. EPSD100243755 Clone of: [SLV_CWP] Wording mistake in 'CPU C State Control-C1E Autopromote' interface of BIOS SETUP. EPSD100243763 Clone of: [SLV_CWP] Wording mistake in 'CPU C State Control' interface of BIOS SETUP. EPSD100026816 Setup menu display will be distorted after changing Console Redirection settings EPSD100242907 WCP - CATERR with PCIe SSD card in Riser 1 EPSD100243596 System CATERRs when the Intel SSD PCIe AIC card is installed ================================================================================ R01.01.0002 ================================================================================ EPSD100243732: Fibre channel boot drives are not being handled correctly by the BIOS ================================================================================ R01.01.0003 ================================================================================ EPSD100244174 Security vulnerability on SMI GetVariable interface was captured by SeCOE ================================================================================ D627 ================================================================================ EPSD100243583 (KSKU only issue)SATA ports and PCIe slot information error in SMBIOS table EPSD100243600 FCoE Error during POST and Option ROM setup utility is blank. EPSD100243613 The IPv6 Network Configuration cannot be configured under UEFI mode EPSD100243639 [SLV_CWP]IASC_7.0.15 show DIMM information is incorrect. EPSD100243829 Keyboard input will be distorted after running BMC updating script. EPSD100243846 Clone of: Keyboard input will be distorted after running BMC updating script. EPSD100026836 Clone of: The F9 value of "Resume on AC Power Loss" at the different setup page are not the same. EPSD100243994 [SLV_KNP]SOL the keyboard does not function when BIOS setup with UEFI mode. EPSD100243112 system has possibility to hang at OS windows 2012 entry with one DIMM in slot C1 during OS warm reboot EPSD100243479 [SLV_CWP] DIMM C1, C2, D1, D2 were repeated display in SMBIOS log. (PCT quick test also resulted wrong) EPSD100244053 Clone of: After run cmd "syscfg /bbo "" EFI NW HDD",The boot order change under F2 page could not be saved EPSD100244024 [SLV_CWP]SOL the keyboard does not function when BIOS setup with UEFI mode. EPSD100244043 Clone of: [SLV_TLP]SOL the keyboard does not function when BIOS setup with UEFI mode. EPSD100244051 After run cmd "syscfg /bbo "" EFI NW HDD",The boot order change under F2 page could not be saved EPSD100244052 Clone of: After run cmd "syscfg /bbo "" EFI NW HDD",The boot order change under F2 page could not be saved EPSD100244054 Clone of: After run cmd "syscfg /bbo "" EFI NW HDD",The boot order change under F2 page could not be saved EPSD100026833 The F9 value of "Resume on AC Power Loss" at the different setup page are not the same. EPSD100243897 WCP - Over SOL the keyboard does not function when system is in UEFI mode EPSD100244102 SMI GetVariable interface has the potential security risk which require to be enhanced. EPSD100243787 EFI shell not responding to keyboard properly after BMC update EPSD100243972 FCOE BIOS Setup option misses in the CWP platform EPSD100243947 [SLV_CWP] DIMM C1, C2, D1, D2 were repeated display in SMBIOS log. PCT quick test also resulted wrong. EPSD100243554 FCoE has been disabled for the onboard X540 adapter in BIOS D592 EPSD100243565 (KSKU only issue)SATA ports option in BIOS setup don't match with onboard ports EPSD100242920 No bootable device can be found after install OS with storage card-- QLogic QLE2672-CK EPSD100243732 Fibre channel boot drives are not being handled correctly by the BIOS EPSD100026827 No iSCSI Option ROM option under BIOS Setup EPSD100026828 PXE Option ROM option string show 1Gbe instead of 10Gbe EPSD100243419 The removable icon didn? show on system-tray when plug in USB2.0 storage device on FrontPanel.USB.port2 ================================================================================ D633 ================================================================================ EPSD100026893 i350(Powerville) IOM OpROM don't loading during post EPSD100244275 Cannot enable TXT and receive BIOS POST Code 0xA100 EPSD100244186 WCP - Power Restore Delay Value minimum not long enough for BMC boot time EPSD100244174 Security vulnerability on SMI GetVariable interface was captured by SeCOE ================================================================================ R01.01.0004 ================================================================================ EPSD100026935 The Default Value Of SOL And Console Redirection EPSD100244254 Clone of: School Flat (40G IOmodule) fails the link margin test with concurrent traffic on slot2 IOM riser+carrier. EPSD100244186 WCP - Power Restore Delay Value minimum not long enough for BMC boot time EPSD100026931 Show error message when disabled boot devices EPSD100244439 [X] Customized riser card on riser slot 2 can't detect InfiniBand* card EPSD100244388 Clone of: "Resume AC power loss" status in the file which is save by cmd "syscfg /s A.ini /f /b" won? be changed once change its status with syscfg. EPSD100243547 School Flat (40G IOmodule) fails the link margin test with concurrent traffic on slot2 IOM riser+carrier. EPSD100244367 Add 19.3 NIC package EFI driver and FCOE ROM into Grantley EPSD100244376 Clone of: Syscfg /bldfs does not work same as BIOS F9 function to load default BIOS setting "Resume AC power loss" and "Shutdown Policy" EPSD100244377 Clone of: Syscfg /bldfs does not work same as BIOS F9 function to load default BIOS setting "Resume AC power loss" EPSD100244374 Syscfg /bldfs does not work same as BIOS F9 function to load default BIOS setting "Resume AC power loss" and "Shutdown Policy" EPSD100244379 Clone of: Syscfg /bldfs does not work same as BIOS F9 function to load default BIOS setting "Resume AC power loss" EPSD100244371 "Shutdown policy" and "Resume AC power loss" status in the file which is save by cmd "syscfg /s A.ini /f /b" won? be changed once change their status with syscfg. EPSD100244380 Clone of: "Shutdown policy" and "Resume AC power loss" status in the file which is save by cmd "syscfg /s A.ini /f /b" won? be changed once change their status with syscfg. EPSD100244387 "Shutdown policy" and "Resume AC power loss" status in the file which is save by cmd "syscfg /s A.ini /f /b" won? be changed once change its status with syscfg. EPSD100244394 uEFI iSCSI Boot attempts can be saved without filling in the target name ================================================================================ R01.01.0005 ================================================================================ EPSD100244208 WCP - SEL intermittently reports therm trip ================================================================================ R01.01.0006 ================================================================================ EPSD100245152 SMBIOS problem cause the latest IDA7.17.RC6 boot failure with the 12G SAS RS3LC bridge EPSD100243827 The boot devices will increase if system reboot from RHEL7 aware UEFI and then the system will hang at high proportion EPSD100026915 [TLP-CDAD]The Hdds couldn't be find on the RHEL7.0 when storage card 81605Z inserted the test riser4_slot4_PCIex16. EPSD100244480 Clone of: The boot devices will increase if system reboot from RHEL7 aware UEFI and then the system will hang at high proportion EPSD100243758 [CWP] display L2/L3 cache error detected on the raid controller during post . EPSD100026786 SUT can't boot to RHEL 6.5 x64 when enable "VT for Directed I/O" in BIOS setting. ================================================================================ R01.01.0007 ================================================================================ EPSD100245440 CWP LAN1 link down when doing DC cycle test with ITAS (BIOS Workaround) ================================================================================ D660 ================================================================================ EPSD100244480 Clone of: The boot devices will increase if system reboot from RHEL7 aware UEFI and then the system will hang at high proportion EPSD100243827 The boot devices will increase if system reboot from RHEL7 aware UEFI and then the system will hang at high proportion EPSD100026786 SUT can't boot to RHEL 6.5 x64 when enable "VT for Directed I/O" in BIOS setting. EPSD100026173 Driver Health Protocol (DHP) not working correctly on Wildcat Pass EPSD100244587 Incorrect ACPI table causes NUMA issues in linux EPSD100244594 System booted with only 1 QPI link trained, no errors reported EPSD100026973 [KNP-CDAD]Dual port IB IOM G52882-351 is showed as "single-port" description in BIOS setup menu. EPSD100243758 [CWP] display L2/L3 cache error detected on the raid controller during post . EPSD100244393 uEFI iSCSI boot configuration is lost after reboot EPSD100244993 BIOS: New ESRT2 OpROM and uEFI Driver for Grantley ================================================================================ D670 ================================================================================ EPSD100245129 Can't detect TPM module EPSD100245152 SMBIOS problem cause the latest IDA7.17.RC6 boot failure with the 12G SAS RS3LC bridge EPSD100027027 Clone of: BIOS D660 can't detect TPM module EPSD100027028 Clone of: BIOS D660 can't detect TPM module EPSD100244738 [WCP]If Unplug USB scanner and then re-plug scanner back in ,USB scanner is inactive EPSD100027021 BIOS D660 can't detect TPM module EPSD100240251 WCP - Secondary SATA info loading before Primary SATA info EPSD100027029 Clone of: New Fail Items Of SCT Test - Hii Test EPSD100027032 Clone of: New Fail Items Of SCT Test - Hii Test EPSD100245218 Clone of: New Fail Items Of SCT Test - Hii Test EPSD100027026 New Fail Items Of SCT Test - Hii Test CCB# 273 : QRE: EPSD100244362 Reset after CATERR leaves system in a hung state" is open for annotation ================================================================================ D683 ================================================================================ EPSD100245307 Pressing multiple F6 from SOL skips through boot manager. EPSD100244490 BIOS isn't reporting QPI link errors. EPSD100027078 Help text "Intel(R) ESRT2 (LSI*)" RAID mode not match with BIOS. EPSD100245480 EPSD100245498 - TPM2.0 module can't work EPSD100245607 Unplug TPM1.2 module will load BIOS default value EPSD100027031 BIOS Setup value is not changed to ITK value in D660 EPSD100027076 [SMBIOS] Type 8 no information for NGFF (M.2) device ================================================================================ D691 ================================================================================ EPSD100245810 Syscfg_v13.1.4:a lot of invalid BIOS items displayed in syscfg.ini by command:syscfg /s syscfg.ini /f /b EPSD100245811 Sysinfo_v13.1.5:a lot of invalid BIOS items displayed at 'BIOS Settings' part in sysinfo_log.txt by command:sysinfo -ni EPSD100245884 New ESRT2 1.43 OpROM for inclusion into Grantley Production BIOS BIOS Workaround for CWP 10G NIC OpROM issue Roll back PXE OpROM V2.3.30 and UEFI V4.5.19 update ================================================================================ D001 ================================================================================ RC sync to V1.61 release ================================================================================ D002 ================================================================================ EPSD100027459 No SEL event when build memory Mirror from Independent mode. EPSD100027270 [Broadwell Refresh] After change a few items, then press F10 to save Setup menu, it will pop up a fail screen as picture. EPSD100027520 There's yellow mark in device manager and Add-in VGA missed. EPSD100027469 Setup Memory "Correctable Error Threshold" option value show "!". EPSD100027299 "Total Memory" information not correct in mirror/spare mode. EPSD100027300 "Total Memory" information not correct in mirror/spare mode. EPSD100027282 For user privilege,user still can change item [Enable CPU HWPM]. EPSD100027283 The value of setup item "Active Processor Cores" cannot be changed ================================================================================ D003 ================================================================================ EPSD100247219 [BDW] Syscfg does not work with Broadwell BIOS EPSD100027371 [Broadwell Refresh]TXT - Trusted Boot run txt-stat utility - results error EPSD100027270 [Broadwell Refresh] After change a few items, then press F10 to save Setup menu, it will pop up a fail screen as picture. EPSD100028110/EPSD100028123/EPSD100028123 [Broadwell Refresh]There's no comment about it need to add "UpdateNvram" when downgrade to D001 in D002 release note. ================================================================================ D004 ================================================================================ EPSD100028363 [Broadwell Refresh] BDW ES2 QHUP CPU Cores will be changed after SUT reset. EPSD100028359 [Broadwell Refresh] BIOS setup item "Active Processor Core" will disappear when using BDW ES2 QHUP CPU. EPSD100028377 [Broadwell Refresh] SMBIOS Type 17 cannot report correct memory speed. EPSD100028218 [Broadwell Refresh]After trigger SBE/MBE, SUT will hang up or can't normal reboot into windows. EPSD100247397 [Broadwell Refresh]BSOD displayed when boot to W2012R2 after change active processor cores and HT in SetUp. EPSD100028143 [Broadwell Refresh]Insert PCIe add-on card on CPU2 port 3a , SUT cannot boot into RHEL7.0 /Suse11.3 x64bit EPSD100247300 [BDW] "QPI Fatl Sensor events" logged in SEL EPSD100247194 [BDW] RS2WC080 causes the system to IERR when inserted into Riser Slot 1 EPSD100028627 [BDX-R] ITP got error messages in status register. EPSD100028588 SUT will hang at POST when set BIOS setup item [Uncore Frequency Scaling] to Disabled. EPSD100028642 [Broadwell Reflesh] There's SBE/MBE event in W2K12 R2 when Error Cloaking set as "Enable" ================================================================================ D005 ================================================================================ EPSD100247222 [BDW] Populating more than 10 8GB DIMMs causes IERR before POST. EPSD100028852 [Broadwell Refresh] After change "Active Processor Cores" , then press F10 to save Setup menu, it will pop up a fail screen as picture. EPSD100028848 There's PPR Type / PPR Error Injection test in BIOS Setup menu. EPSD100028879 [Broadwell Refresh] DRIVER NAME not match IMAGE NAME in Driver list ================================================================================ D006 ================================================================================ EPSD100028888 [Broadwell Refresh] F9 load default Confirm page will display twice. EPSD100028870 [Broadwell Refresh] Lost a lot of SMBIOS Information via PETs to dump data. EPSD100028873 [Broadwell Refresh]Cannot flash FUR/SDR by NSH file EPSD100028891 [Broadwell Refresh]USB Mass Storage Device will disappear when Press F9 to load default setting EPSD100028464 [Broadwell Refresh]Wrong label string when load default in Legacy Network Device Order page ================================================================================ D0009 ================================================================================ EPSD100029213:[Broadwell Refresh]ME version not match release note when using iflash tool EPSD100029182:[BDW] SUT can't boot into Windows 2K12 when CPU1 insert 4 DIMMs w/ MFG mode. EPSD100028387:[Broadwell Refresh] ?Kernel-Processor-Power" error log in Windows System Event log. ================================================================================ D0012 ================================================================================ Update ACM binary to version v02.07.01 ================================================================================ D0016 ================================================================================ update RSTOpROM to 4.3 EPSD 100248789 : [BDW]Win2008r2 SP1 can't install with UEFI mode in BIOS D004 sync CR_1862: EPSD 100248324 : Windows RSTe GUI will not start when Grantley system is in UEFI mode. EPSD 100029047 Processor Thermal Trip is tiggered while heat DIMM's temperature to UC. Update HSW ucode to 0x2e. sync CR_1860: EPSD 100028979 : After RHEL 7.1(UEFI) OS installation by using 4Kn HDD as system disk, cannot reboot into OS. sync CR_1857: EPSD 100248578 : (X) BMC WEB GUI does not display memory config with 64GB LRDIMMS. sync CR_1855: EPSD 100029220 : The count of maximum USB mass storage devices cannot match with EPS description. sync CR_1851: EPSD 100029123 :[R0009]System will display warning message when enable Cluster on Die sync CR_1845: [ EPSD 100028064 ][24HDD] Suggest add/change some information of SMBIOS Data Add some HWPM related fix ================================================================================ D0019 ================================================================================ Updating PCSD_Grantley_Refresh BIOS IDs: 20150710_CP_PCSD_GRANTLEY_REFRESH_11_01_D0017 UEFI Secure Boot sync: CP_CR_1848 EPSD 100248718 : WCP - NVRAM clear fails when initiated in UEFI Secure Boot mode UEFI Secure Boot sync: CP_CR_1782 EPSD 100028678 : [D730] SUT will get IERR event when enable secure boot via ITK or Syscfg UEFI Secure Boot sync: CP_CR_1764 Errata to CR_1784 UEFI Secure Boot sync: CP_CR_1763 EPSD 100029185 :Clone of: [D748]Boot into unsign OS the Error Message will shortag UEFI Secure Boot sync: CP_CR_1800 EPSD 100028683 : New failure item of SCT UEFI Secure Boot sync: CP_CR_1798 Disable INT10 workaround in case secure boot has been enabled UEFI Secure Boot sync: CP_CR_1784 Enhance secure boot error handler to cover RHEL 6.5 created boot option UEFI Secure Boot sync: CP_CR_1777 Deploy formal secure boot keys for Grantley product BIOS Updating PCSD_Grantley_Refresh BIOS IDs: 20150714_CP_PCSD_GRANTLEY_REFRESH_11_01_D0018 UEFI Secure Boot sync: Enable macro SECURE_BOOT_ENABLE EPSD 100248594 : [BDW refresh]-sysinfo_13.1.9:some information shown nothing in F2 setup while sysinfo.log has shown Updating PCSD_Grantley_Refresh BIOS IDs: 20150715_CP_PCSD_GRANTLEY_REFRESH_11_01_D0019 RC sync to V 1.8.1 ================================================================================ D0024 ================================================================================ Updating PCSD_Grantley_Refresh BIOS IDs: 20150716_CP_PCSD_GRANTLEY_REFRESH_11_01_D0020 EPSD 100248918 : [BDW refresh]-syscfg_v13.1.12: system can't reboot after run the command 'syscfg /bldfs ' EPSD 100029348 : [Broadwell Refresh]System will hang ,when set CMOS jumper to pin2-3. Updating PCSD_Grantley_Refresh BIOS IDs: 20150717_CP_PCSD_GRANTLEY_REFRESH_11_01_D0021 roll back ME to 03.01.02.002 Updating PCSD_Grantley_Refresh BIOS IDs: 20150720_CP_PCSD_GRANTLEY_REFRESH_11_01_D0022 EPSD 100247222 : [BDW] Populating more than 10 8GB DIMMs causes IERR before POST Updating PCSD_Grantley_Refresh BIOS IDs: 20150721_CP_PCSD_GRANTLEY_REFRESH_11_01_D0023 Create PCI-e CTLE setting hook routine and fill in correct values. EPSD 100029519 : [broadwell refresh]A fail screen will pop up when do F9 or change some setting,then press F10. EPSD 100249052 : [Broadwell Refresh] ACPI Table is published not correct when set "Enable CPU HWPM" = HWPM NATIVE MODE / HWPM OOB. Updating PCSD_Grantley_Refresh BIOS IDs: 20150722_CP_PCSD_GRANTLEY_REFRESH_11_01_D0024 EPSD 100029366 :[BDW]WHEAHCT Logo Test failed during Windows 2012 R2 WHQL test ================================================================================ D0028 ================================================================================ Updating PCSD_Grantley_Refresh BIOS IDs: 20150723_CP_PCSD_GRANTLEY_REFRESH_11_01_D0025 Force to update WrCRC and WrCrcErrFlow setting. Updating PCSD_Grantley_Refresh BIOS IDs: 20150724_CP_PCSD_GRANTLEY_REFRESH_11_01_D0026 EPSD 100029490 /EPSD100029487 [BDW] The help Message of BIOS Setup item "Secure Boot Configuration" and "Attempt Secure Boot" cannot match with EPS 1.15 update HSX ucode to 0x32 Updating PCSD_Grantley_Refresh BIOS IDs: 20150728_CP_PCSD_GRANTLEY_REFRESH_11_01_D0027 EPSD 100249057 : [BDW refresh] BIOS Memory SPD dump information is not correct for DDR4 caused by offset mismatch with DDR4 spec EPSD 100029556 :[Broadwell Refresh] Latest BDW CScript cannot be used with D0019 BIOS, but D0016 works well. FUpdating PCSD_Grantley_Refresh BIOS IDs: 20150729_CP_PCSD_GRANTLEY_REFRESH_11_01_D0028 EPSD 100029560 :[Broadwell Refresh] Enable SBO, sSTATA ESRT2 RAID didn't rollback the top of SBO after re-install HDDs. RC sync to V1.8.5 ================================================================================ D0036 ================================================================================ Updating PCSD_Grantley_Refresh BIOS IDs: 20150731_CP_PCSD_GRANTLEY_REFRESH_11_01_D0029 sync CR_1873: EPSD 100029609 : ME version is not correct ,when disabled Quiet Boot function. sync CR_1872: EPSD 100029576 : [Broadwell Refresh] SMBIOS Type 8 Serial Port type not correct. EPSD 100249098 : [BDW]Get abnornmal message while press F10 in BIOS setup with BKC D00019 BIOS Cottonwood Pass CCB 279: Support for 4X4 PCIe bifurcation support on all X16 PCIe Slot Updating PCSD_Grantley_Refresh BIOS IDs:20150801_CP_PCSD_GRANTLEY_REFRESH_11_01_D0030 sync CR_1874: EPSD 100249073 Problems with the static boot order on a WCP system with an Umbrel Updating PCSD_Grantley_Refresh BIOS IDs: 20150803_CP_PCSD_GRANTLEY_REFRESH_11_01_D0031 EPSD 100029365 : [BDW]USB Exposed Port System Test failed during Windows 2012 R2 WHQL test. Updating PCSD_Grantley_Refresh BIOS IDs: 20150804_CP_PCSD_GRANTLEY_REFRESH_11_01_D0032 W/A for some pcie gen2 link width not stable Add BDX B0 uCode (0x0b000006) Updating PCSD_Grantley_Refresh BIOS IDs: 20150805_CP_PCSD_GRANTLEY_REFRESH_11_01_D0033 EPSD 100249090 NTB has the performance issue with Grantley BIOS 1.01.0008 Updating PCSD_Grantley_Refresh BIOS IDs: 20150806_CP_PCSD_GRANTLEY_REFRESH_11_01_D0034 Remove BDX B0 ucode Updating PCSD_Grantley_Refresh BIOS IDs: 20150810_CP_PCSD_GRANTLEY_REFRESH_11_01_D0035 EPSD 100029691 :[Broadwell Refresh] Variables didn't be clear by NVRAM reclaim function. EPSD 100029635 :[Broadwell Refresh]Error manager information not match EPS1.15 define when install Bad SPD DIMM. EPSD 100249249 : Can't install RHEL_7.1&SLES12 in ESRT2/RAID Controller (RS3DC080) with BKC BIOS. Updating PCSD_Grantley_Refresh BIOS IDs: 20150811_CP_PCSD_GRANTLEY_REFRESH_11_01_D0036 EPSD 100029520 :[Broadwell Refresh]Current Secure Boot State should be Enable when Press F9 to load default setting. ================================================================================ D0044 ================================================================================ Updating PCSD_Grantley_Refresh BIOS IDs: 20150812_CP_PCSD_GRANTLEY_REFRESH_11_01_D0037 EPSD 100029647 / EPSD100029648/ EPSD100029650: [Broadwell Refresh]Onboard video function cannot enable when insert VGA card in Riser2 and Riser3 Updating PCSD_Grantley_Refresh BIOS IDs: 20150813_CP_PCSD_GRANTLEY_REFRESH_11_01_D0038 EPSD 100029539 :[BDW]The PCIe root port of BSP will be hidden. Updating PCSD_Grantley_Refresh BIOS IDs: 20150814_CP_PCSD_GRANTLEY_REFRESH_11_01_D0039 EPSD 100249414 : [BDW]System get hang while press F10 to save and exit in BIOS Setup Updating PCSD_Grantley_Refresh BIOS IDs: 20150819_CP_PCSD_GRANTLEY_REFRESH_11_01_D0040 NO SIGHTING: Sync RC setup default settings. Updating PCSD_Grantley_Refresh BIOS IDs: 20150820_CP_PCSD_GRANTLEY_REFRESH_11_01_D0041 [ EPSD 100249336 ]BIOS not populating all SMBIOS Type 17 information from ADATA AD4R2133Y16G15-BHYM DIMM Update ME to 03.01.03.004 Updating PCSD_Grantley_Refresh BIOS IDs: 20150821_CP_PCSD_GRANTLEY_REFRESH_11_01_D0042 EPSD 100029520 :[Broadwell Refresh] System Boot Timeout value will not back to default setting when Clear CMOS by jumper. Updating PCSD_Grantley_Refresh BIOS IDs: 20150824_CP_PCSD_GRANTLEY_REFRESH_11_01_D0043 EPSD 100029782 :[BDW_D0037_Bx] SUT will get IERR when install OS process. Updating PCSD_Grantley_Refresh BIOS IDs: 20150825_CP_PCSD_GRANTLEY_REFRESH_11_01_D0044 Addendum to EPSD 100029782 :[BDW_D0037_Bx] SUT will get IERR when install OS process. Known Issues: [EPSD100249582][BDX] Micron MT72ASS4G72LZ-2G1A1 LRDIMMs cause correctable memory errors. [EPSD100249319][broadwell refresh] 32GB 2400MHz Samsung LRDIMM missed in MVL cycling test. [EPSD100249031][BDW][OS Install] Some error/fail messages display in the log after VMWare ESXi6.0 installed on AHCI controller. [EPSD100029164][BDW]Boot failed after sles11 sp3 x86 install finished in AHCI ESRTII raid1+SSATA ESRTII raid1 or SSATA ESRTII raid1+ AHCI ESRTII raid1. [EPSD100027916][BDW] window 2012 R2 64bit,exsit some errors in event log with new BDW CPU. ================================================================================ D0055 ================================================================================ Updating PCSD_Grantley_Refresh BIOS IDs: 20150831_CP_PCSD_GRANTLEY_REFRESH_11_01_D0045 EPSD 100029168 :[BDW]windows cannot be installed to disk1 when install windows2008r2 Updating PCSD_Grantley_Refresh BIOS IDs: 20150901_CP_PCSD_GRANTLEY_REFRESH_11_01_D0046 EPSD 100249349 : DFT violation 2122, BIOS needs to fill out the Physical Slot Number field in the Slot Capabilities Register (Offset 14h) in PCI Config Space. Updating PCSD_Grantley_Refresh BIOS IDs: 20150902_CP_PCSD_GRANTLEY_REFRESH_11_01_D0047 EPSD 100249399:For unsupported PCIe riser card configuration, PCIe bifurcation setting should display as not support text instead of showing blank screen. Updating PCSD_Grantley_Refresh BIOS IDs: 20150907_CP_PCSD_GRANTLEY_REFRESH_11_01_D0048 EPSD 100029947 :[HSX] Spelling error "complated" in Intel BIOS DHP screen Sync with RC V2.0.0 release Updating PCSD_Grantley_Refresh BIOS IDs: 20150908_CP_PCSD_GRANTLEY_REFRESH_11_01_D0049 EPSD 100249031 :[BDW][OS Install] Some error/fail messages display in the log after VMWare ESXi6.0 installed on AHCI controller Updating PCSD_Grantley_Refresh BIOS IDs: 20150911_CP_PCSD_GRANTLEY_REFRESH_11_01_D0050 EPSD 100249435 :[HSX](X) Intel System BIOS DHP issue with Intel Hardware RAID controllers that have pinned cache sync CR_1881: Cray Critical Performance Issue IPS 6000121610 Updating PCSD_Grantley_Refresh BIOS IDs: 20150916_CP_PCSD_GRANTLEY_REFRESH_11_01_D0051 (CL282269)Sync IERR WA CR_1895,CR_1896 on BDX (CL282269)CP_CR_1895 EPSD 100029296 BCP 24HDD PCIe SSD lost during ACDC cycling (CL282269)CP_CR_1896 Add 3s delay for SSD no response EPSD 100029988 :[Broadwell Refresh]The Help Text of Enforce Recommended Memory Speed option not match EPS1.15 Updating PCSD_Grantley_Refresh BIOS IDs: 20150917_CP_PCSD_GRANTLEY_REFRESH_11_01_D0052 [BDW]add a warning message when BDX processor is populated sync CR_1898 Update HSX CPU ucode to 0x36 Updating PCSD_Grantley_Refresh BIOS IDs: 20150918_CP_PCSD_GRANTLEY_REFRESH_11_01_D0053 Addendum to CL283165 Change the BDX bootable bios warning message according to IVB refresh. addendum to CL282747 Updating PCSD_Grantley_Refresh BIOS IDs: 20150922_CP_PCSD_GRANTLEY_REFRESH_11_01_D0054 CCB381: To add BIOS setup option to allow DPDK performance tuning for IIO snoop response hold off timep Updating PCSD_Grantley_Refresh BIOS IDs: 20150923_CP_PCSD_GRANTLEY_REFRESH_11_01_D0055 Roll back CL282269 Remove BDW A stepping ucode, add BDW B stepping ucode Addendum to CL280589 ================================================================================ D0058 ================================================================================ Addendum to changelist 257407: Create PCI-e CTLE setting hook routine and fill in correct values Updating PCSD_Grantley_Refresh BIOS IDs: 20150925_CP_PCSD_GRANTLEY_REFRESH_11_01_D0056 EPSD100030087:[Broadwell Reflesh] SUT hangs at 0xBF after downgrade BIOS from D0055 to R0009/R0011 randomly [BDX] Sync RC 2.4.0 release. Updating PCSD_Grantley_Refresh BIOS IDs: 20150928_CP_PCSD_GRANTLEY_REFRESH_11_01_D0057 Update BDW B0 ucode Updating PCSD_Grantley_Refresh BIOS IDs: 20150929_CP_PCSD_GRANTLEY_REFRESH_11_01_D0058 ================================================================================ D0064 ================================================================================ EPSD100249408: [x]BIOS does not honour ver 1 PCIe capabilities header on Wildcat Pass platform Updating PCSD_Grantley_Refresh BIOS IDs: 20151012_CP_PCSD_GRANTLEY_REFRESH_11_01_D0059 BCP NVMe WA:<1>IIO delay training.<2> SBR to prevent PCIe link downgrade happen. Updating PCSD_Grantley_Refresh BIOS IDs: 20151013_CP_PCSD_GRANTLEY_REFRESH_11_01_D0060 EPSD100250188: BIOS not supporting Package C6 remove the EPSD_2016_YEAR_DEBUG build option Updating PCSD_Grantley_Refresh BIOS IDs: 20151014_CP_PCSD_GRANTLEY_REFRESH_11_01_D0061 EPSD100250325:BDW BIOS 0044 missing Aries support Install BDX B0 CPU QPI and PCI-e CTLE value setting. Updating PCSD_Grantley_Refresh BIOS IDs: 20151016_CP_PCSD_GRANTLEY_REFRESH_11_01_D0062 EPSD100029367 On SAS SKU, press F9 to load default in UEFI mode, then press F10 to save Setup menu, it will pop up a fail screen as picture. The CTLE settings for BDX B0 stepping processor --- CWP Updating PCSD_Grantley_Refresh BIOS IDs: 20151019_CP_PCSD_GRANTLEY_REFRESH_11_01_D0063 [BDX] Sync with RC 2.9.0 early release.V269.D05 EPSD100030019: [R1011] SMBIOS Type 17 Manufacturer string missed with NVDIMM - Viking. EPSD100030022: [R1011] SMBIOS Type 17 cannot report correct memory speed with NVDIMM - Smart. Add biosId manually for daily build. ================================================================================ D0070 ================================================================================ EPSD100030146: [Broadwell Refresh] WCP with LRDIMM Rank Sparing mode Total Memory size not correct. Updating PCSD_Grantley_Refresh BIOS IDs: 20151021_CP_PCSD_GRANTLEY_REFRESH_11_01_D0065 EPSD100030015: [R1011] SUT will halt after change Syetem Date / Time to maximum value. EPSD100249435: [HSX] (X) Intel System BIOS DHP issue with Intel Hardware RAID controllers that have pinned cache. Updating PCSD_Grantley_Refresh BIOS IDs: 20151026_CP_PCSD_GRANTLEY_REFRESH_11_01_D0066 EPSD100250328/EPSD100250426: [BDW] TXT MeasuredLaunchEnvironment Function test fail on D0058 BIOS./Tboot result is "FALSE" with TPM2 on BDW. Remove 'UpdateNvram' support for iflash32 tool for security reason of SRA bios. EPSD100110737 (X) PCR1 not constistent on TPMTXT Enabled Kennedy Pass System. Updating PCSD_Grantley_Refresh BIOS IDs: 20151027_CP_PCSD_GRANTLEY_REFRESH_11_01_D0067. Update TXT ACM binary to v3.0.1(PW) Remove Extended ATR and Pfloor tuning setup menu for DCA IERR issue (TOR timeout symptoms). Update ME to 03.01.03.013 Updating PCSD_Grantley_Refresh BIOS IDs: 20151030_CP_PCSD_GRANTLEY_REFRESH_11_01_D0068 Rollback ME to 03.01.03.05 Updating PCSD_Grantley_Refresh BIOS IDs: 20151102_CP_PCSD_GRANTLEY_REFRESH_11_01_D0069 Update BIOSID to D0070 Update ucode to 0b00000e for BDW B stepping ================================================================================ R0013 ================================================================================ Rename BIOS ID from D0070 to R0013, no any other code change. ================================================================================ R0014 ================================================================================ EPSD100251243:10% failure was found with wrong system time setting during WCP BDW refresh build. ================================================================================ D0076 ================================================================================ Updating PCSD_Grantley_Refresh BIOS IDs: 20151103_CP_PCSD_GRANTLEY_REFRESH_11_01_D0071 According to update some setup strings. Updating PCSD_Grantley_Refresh BIOS IDs: 20151106_CP_PCSD_GRANTLEY_REFRESH_11_01_D0072 addendum to CL284282: CCB381 Updating PCSD_Grantley_Refresh BIOS IDs: 20151109_CP_PCSD_GRANTLEY_REFRESH_11_01_D0073 Sync RC v2.9.0 formal release CP_GRANGEVILLE_GRANTLEY_REF_GNV_82_D10_GRT_REF_269_D10 Updating PCSD_Grantley_Refresh BIOS IDs: 20151110_CP_PCSD_GRANTLEY_REFRESH_11_01_D0074 Update ME to 03.01.03.018 Updating PCSD_Grantley_Refresh BIOS IDs: 20151111_CP_PCSD_GRANTLEY_REFRESH_11_01_D0075 Sync with RC 2.9.1 release 271_D02 Roll back CL276388 temporarily(Defect/ EPSD 100030186 ) Enable NVDIMM support on Grantley-R Remove BDW warning message EPSD 100030446 : [BDW][HSW CPU]In BIOS Setup the FRU/SDR version not match EWS EPSD 100250604 : IERR seen during L1 exit when run L1 stress test on SFF NVMe drive [FLASH] [BDW] Updating PCSD_Grantley_Refresh BIOS IDs: 20151119_CP_PCSD_GRANTLEY_REFRESH_11_01_D0076 ================================================================================ D0080 ================================================================================ EPSD100250557: [BDW]Correctable error is logged after only 1 time error injection with 'PCIe Correctable errorthreshold' as '5'. EPSD100110738: (X) PCR0 and TPM event log does not match on TPM/TXT Enabled Kennedy Pass System WCP 1U Riser CCB77&78 Support Updating PCSD_Grantley_Refresh BIOS IDs: 20151120_CP_PCSD_GRANTLEY_REFRESH_11_01_D0077 EPSD100030378: [Broadwell Refresh] It will become cold boot when Press ctrl + Alt + Del to reset system in EFI Shell. EPSD100029367: [BDW]On SAS SKU, press F9 to load default in UEFI mode, then press F10 to save Setup menu, it will pop up a fail screen as picture Updating PCSD_Grantley_Refresh BIOS IDs: 20151125_CP_PCSD_GRANTLEY_REFRESH_11_01_D0078 EPSD100030533: [BDW][HSW CPU][NVDIMM]SUT would hang at POST code 0x07 with NVDIMM-SMART when reboot by OS. [NO SIGHTING] Debug mode build failed due to not enough FV space. Update ME to 03.01.03.020 Updating PCSD_Grantley_Refresh BIOS IDs: 20151127_CP_PCSD_GRANTLEY_REFRESH_11_01_D0079 Rollback ME to changelist 308024(ME18) EPSD100250425: TPM2 table platform class value error EPSD100250639: [X]BIOS shows the onboard IB module GUID and MAC address as all 0 in the NIC2 section in BIOS-> PCIe -> NIC management page. Updating PCSD_Grantley_Refresh BIOS IDs: 20151130_CP_PCSD_GRANTLEY_REFRESH_11_01_D0080 ================================================================================ D0082 ================================================================================ EPSD100250978: [WCP] -- ME can't be reboot via "Global Resets" Updating PCSD_Grantley_Refresh BIOS IDs: 20151202_CP_PCSD_GRANTLEY_REFRESH_11_01_D0081 Sync with RC V2.9.5 esPV release CP_GRANGEVILLE_GRANTLEY_REF_GNV_85_D04_GRT_REF_272_D04 CCB371: enable NTB Bar size option in BIOS configuration interface Updating PCSD_Grantley_Refresh BIOS IDs: 20151203_CP_PCSD_GRANTLEY_REFRESH_11_01_D0082 ================================================================================ D0089 ================================================================================ EPSD100250649: [BDW] Enabling "SOL for baseboard mgmt" setting is not saved if any other settings were changed first Updating PCSD_Grantley_Refresh BIOS IDs: 20151204_CP_PCSD_GRANTLEY_REFRESH_11_01_D0083 Addendum to CL316362 Updating PCSD_Grantley_Refresh BIOS IDs: 20151205_CP_PCSD_GRANTLEY_REFRESH_11_01_D0084 Correct the copyright Updating PCSD_Grantley_Refresh BIOS IDs: 20151207_CP_PCSD_GRANTLEY_REFRESH_11_01_D0085 Correct some setup strings EPSD100251151:[BDW][BDW CPU] At EFI shell use dmem to check "Primary Bar 5 Size" and "Secondary Bar 5 Size" value not the same as you set at BIOS setup Updating PCSD_Grantley_Refresh BIOS IDs: 20151209_CP_PCSD_GRANTLEY_REFRESH_11_01_D0086 Sync with RC V3.0.0 full PV release CP_GRANGEVILLE_GRANTLEY_REF_GNV_85_D04_GRT_REF_272_D11 Update ME to 03.01.03.021 Updating PCSD_Grantley_Refresh BIOS IDs: 20151214_CP_PCSD_GRANTLEY_REFRESH_11_01_D0087 EPSD100030662: [BDW]"DIMM Thrm Mrgn" of sensors reading page will lost on EWS after BMC reset. Updating PCSD_Grantley_Refresh BIOS IDs: 20151216_CP_PCSD_GRANTLEY_REFRESH_11_01_D0088 [EPSD100251243]10% failure was found with wrong system time setting during WCP BDW refresh build. Updating PCSD_Grantley_Refresh BIOS IDs: 20151217_CP_PCSD_GRANTLEY_REFRESH_11_01_D0089 ================================================================================ D0094 ================================================================================ PCIeGen2_20151030_Final_CheckIn [ EPSD 100251243 ]10% failure was found with wrong system time setting during WCP BDW refresh build. CCB396: Make IOU non posted prefetch user visible in Grantley Refresh BIOS. Addendum of RC V3.0.0 sync EPSD 100030350 _BDW CPU PCIe margin by IEVT than less 2x5 spec. ================================================================================ D0100 ================================================================================ Correct the help text of "Restore NVDIMMs" Updating PCSD_Grantley_Refresh BIOS IDs: 20160104_CP_PCSD_GRANTLEY_REFRESH_11_01_D0095 GMI/Teradyne/Eagle Test Systems: System Issue: S2600CW2 BIOS Issue Updating PCSD_Grantley_Refresh BIOS IDs: 20160111_CP_PCSD_GRANTLEY_REFRESH_11_01_D0096 EPSD100251269:[BDW][BDW CPU] When inject WRCRC error, no "DDR4 CAP errors" appear. Updating PCSD_Grantley_Refresh BIOS IDs: 20160113_CP_PCSD_GRANTLEY_REFRESH_11_01_D0097 EPSD100030533/EPSD100031231 [BDW][HSW CPU][NVDIMM]SUT would hang at POST code 0x07 with NVDIMM-SMART when reboot by OS. Updating PCSD_Grantley_Refresh BIOS IDs: 20160115_CP_PCSD_GRANTLEY_REFRESH_11_01_D0098 EPSD100251463: Production ESRT2 EFI driver for inclusion into Grantley production BIOS. Updating PCSD_Grantley_Refresh BIOS IDs: 20160118_CP_PCSD_GRANTLEY_REFRESH_11_01_D0099 W/A for [BDW] 2400MHz LRDIMM size missed in power cycling test Change BIOS ID to D0100 ================================================================================ D0103 ================================================================================ Rollback CL331974, issue found with this new ESRT2 EFI Driver EPSD100031270 CPU core display mismatch by changing BIOS CPU core setting. Remove [Esc] key help string and change BIOS ID to D0103. ================================================================================ R0015 ================================================================================ Rename BIOS ID from D0103 to R0015 ================================================================================ D0107 ================================================================================ EPSD100251854: Set the physicalPresenceLock to 0 in MFG mode to support platform certificate process CCB402: BIOS and Utility to add command line support to clean ITK customization settings EPSD100030692: [BDW] System would reset during OFU(OFU_V13_Build13_AllOS) updating process with RHEL 7.1. NVDIMM SMBIOS type17 bug fix CCB 397: To support maximum ( > 250) PCI bus number in Grantly CottonWood BIOS for customer CCB 399: Enable BIOS options to use AMD graphics or Nvidia card adapters Update uCode to 0x14 to fix EPSD100249795 and EPSD100251863 one code logic error found for IOU2 Non-Posted Prefetch Disable PCIe Ecrc due to silicon sighting b282685 CCB 396 issues - ITK cannot modify some items correctly ================================================================================ D0115 ================================================================================ correct help string of "ARI Forwarding" EPSD100031475 [BDW CPU]BMC DHCP HOST NAME behavior is not matching EPS1.16. EPSD100031504 [BDW CPU][Riser]System will hang when remove SSD device under OS. EPSD100251955 DMI type 41 records is not correct for onboard and IO module NICs. Update HSX Ucode to 00000037, BDW Ucode to 0B000015. fix some BIOS Setup Display Issues, which mismatch with BIOS EPS. Sync the "CP_CR_1619 TPM2 bitlocker workaround for UEFI OS that synced from TPM1.2" from HSW tree, will fix Bitlocker can’t be enabled when PCR5 enabled in UEFI mode. Change Copyright to 2016. Update BDW Ucode to 0B000017. 5003273: System would hang at post code 0xBF during DC cycle test after enabling WrCRC setup option. EPSD100031629 The TPM2.0 test item have failure on WHCK test. CCB 411: HFI UEFI Option ROM not loaded by Grantley Refresh BIOS on HSX or BDX EPSD100030788 [Riser] Supplemental Test#2 Issue. ================================================================================ R0016 ================================================================================ Rename BIOS ID from D0115 to R0016 ================================================================================ D0125 ================================================================================ Roll back W/A for [BDW] 2400MHz LRDIMM size missed in power cycling test EPSD 100251966 : 32GB Hynix LRDIMM size mismatch during cycle test EPSD 100031669 : Intel SSD AIC SSDPEDMX020T4 Link margin Fail EPSD 100252478 After saving in setup, PXE boot option is not maintained during reboot EPSD 100032100 : [BDW][BDW CPU]Hot key F12 without function during POST when boot mode change to UEFI Sync Grantley RC 3.2.0 code EPSD 100032112 : SBO function not correct when insert USB device in J3A1 and J8E2 EPSD 100252440 Inversion PCIE card location was detected between Riser slot 1 and slot 2 EPSD 100252718 : Use Angilent Card to inject Poisoned TLP and Surprise Link Down fatal error the function is abnormal. IpPlan v1.12 update. IpPlan v1.12 document update. NO SIGHTING: IpPlan Doc update. EPSD 100252195 :Clone of: [X] DMI type 41 records is not correct for onboard and IO module NICs. EPSD 100252209 [X] Syscfg 13.1-15 sets [Snooped Response Wait Time] and [Non-Posted Prefetch] options fail with BIOS R15 + BDW. EPSD 100252266 : [BDW][TGF]Connect Resistor TGF card to Riser slot 2 and set bifurcation to x16, SUT hang at POST screen. EPSD 100031863 [BDW][BDW CPU]SMBIOS Type 7 L3-Cache associativity should display 20 way not fully. EPSD 100031758 : [BDW][BDW CPU] Error message not match EPS1.16 at Error manager Update copyright to 2016 ================================================================================ D0132 ================================================================================ CCB 391: Implement a BIOS setup option to Limit PWM to a maximum value similar to Purley EPSD 100252598 : [x] Add more DIMM support -- supported DIMM informaiton can't be shown correctly in SMBIOS Table Memory information EPSD 100032105 : [BDW][BDW CPU] Error message of memory channel A not match other Channel. Update ME to 03.01.03.032 EPSD 100032453 [BDW][BDW CPU]The String not right at IOU Non-Posted Prefetch Control in BIOS Setup. EPSD 100251776 [WCP] VR Watchdog reports it has been asserted after Global reset(Update ACM to v3.0.5) hidden "Platform type input for SPD page selection" BIOS workaround for EPSD 100031139 [Switch]The DPC function couldn't work on the PCIe switch AIC via Switch AIC EPSD 100032467 [BDW][BDW CPU] Press Hot key F6 , F12 will not display any screens describe during POST EPSD 100252973 : NTB performance drop with DMA-enabled ================================================================================ D0136 ================================================================================ EPSD 100253299 : 4x4x4x4 on Slot5 for S2600CW2SR EPSD 100253233 : CC_SPARE bits not cleared in accordance with E5_v3 spec update (CDI # 550584) errata HSE22S - may cause NVMe issues EPSD 100253548 : "Fan PWM Limit" default value and operational range are wrong ================================================================================ D0137 ================================================================================ EPSD 100253648 : Grantley memory RAS feature ECC error Leaky Bucket decay time window is set to 100 days, which is too long. ================================================================================ D0140 ================================================================================ EPSD 100253916 : The default value of BIOS setup option [Snooped Response Wait Time for Posted Prefetch] is not correct during R9 to R16 update EPSD 100254004 : Security Fix for Grantley SmmRuntime driver ================================================================================ R0018 ================================================================================ Rename BIOS ID from D0140 to R0018 ================================================================================ D0144 ================================================================================ EPSD 100253867 : [x]Hikvision report the BIOS settings can not load user default EPSD 100254081 : [X] To enable TXT is required to load BIOS default during BIOS R0016 update EPSD 100252975 [WCP] Staggered spin-up is not working properly on R2308WTTYSR causing 240VA trip Update RC code to 3.6.0 ACM binary update V3.1.0 Update BDW uCode to 0b00001b EPSD 100254244 : MCE Error regarding QPI on Grantley Systems ================================================================================ D0146 ================================================================================ EPSD 100253725 [BDW] SMBIOS Type10 and Type41 isn't correct under I350 NIC SKU system. CCB 427: To support ITK/Syscfg to adjust UEFI mode boot order. EPSD 100034249 : [BDW] Partition Row Position field value is repeated if there are multiple Type 20 structures ================================================================================ D0154 ================================================================================ EPSD 100034250 : [BDW] Slot ID shown in type9 is different from PciSlotTest.efi shown. Addendum to CL410215: missed one file Addendum to CL409267 EPSD 100034655 : [BDW] Some of IO Module information not gray out in NIC Configuration page. EPSD 100034648 : [BDW] "Current SecureBoot State" is not grey out, it just information only. EPSD 100034500 : [BDW] system will auto shutdown on POST code 0x62 when plug-in 1DPC Micron 8G memory. According to the reprovisioning guidance, the TPM NV indices were changed, BIOS code should follow. EPSD 100034728 [BDW] system will auto reset when disable NIC1 Controller on WCP platform. CCB#472 - Add an ITK option in BIOS for KNLTLP USB bridge board over current workaround. EPSD 100252480 [win2016precert]Assurance AQ test item failed CCB462 - Memory speed support POR+1 for BDW addendum to CL423546 [CCB462 - Memory speed support POR+1 for BDW] ================================================================================ R0019 ================================================================================ Rename BIOS ID from D0154 to R0019 ================================================================================ D0163 ================================================================================ CCB 480: To support OEM activation feature in ITK on Grantley EPSD 100255536 : Boot order in UEFI mode doesn’t change to default after saving changes and resetting system Update ucode 00000039 for HSX, 0b00001f for BDW Update ME to 03.01.03.043 CCB 466: To support early VGA video display on Grantley EPSD 100035007 The screen which is provided for user to confirm TPM2 clear operation. Fix chipsec security Test failed in SMI 0x26, 0x28 and 0xef(BIOS Security enhancement for SMM communication buffer) ================================================================================ D0170 ================================================================================ EPSD 100034250 - [BDW] Slot ID shown in type9 is different from PciSlotTest.efi shown CCB488: Provide an option to enable/disable SSC in BIOS Setup Menu Update RC to 3.9.0 EPSD 100035506 : [BDW] SMBIOS Type 9 structures are wrong on WCP with some riser cards configurations ================================================================================ D0172 ================================================================================ EPSD 100035920: System will hang on diagnostic screen when press F2/F6 button continuous under MFG mode EPSD 100255932: Fix remote terminal show corrupt BIOS Setup screen when Console Redirection Baud Rate is 9.6k/19.2k/38.4k/57.6k issue ================================================================================ R0020 ================================================================================ Rename BIOS ID from D0172 to R0020 ================================================================================ D0181 ================================================================================ CCB#483: Allow ITK to change SMBIOS table OEM Strings (Type 11) EPSD 100256184:Fix issue PCIe card is not receiving IRQs in the second slot of customer riser CCB1713: Add an option in ITK to allow customer to enable/disable Spread Spectrum Clock (SSC) EPSD 100036011: [BDW] SMBIOS have some problem in the BCP24HDD platform with SAS bridge board EPSD 100036147: [BDW] Serial Port / eUSB should belong internal device not external device in SMBIOS Type8 [HSD-ES][2103614071][BDW] BMC version show wrong in diagnostic screen Update copyright to 2017 EPSD 100036010: [BDW] COM Port amount in Windows DM not match BIOS Serial Port setting Update RC code to v4.0.0 EPSD 100255807: Some modules are failed in existing vulnerability test by running command "chipsec_main.py"--- fix C-State lock issue EPSD 100255807: Some modules are failed in existing vulnerability test by running command "chipsec_main.py"--- fix MsUnitDeviceFunctionHideLock issue ================================================================================ D0187 ================================================================================ EPSD 100036120 : [BDW] Press F2/F6/F12 on clear ownership interactive page will see unexpected message show up [HSD-ES][2103614916]: [BDW] A typo in the help text of Crosslink control override option, it should be DSDUSP [HSD-ES][2103614926]: UUT will halt when first 32bit of IPv6 Address/Gateway are set to a value over 32bit [HSD-ES][1504411152]: Grantley Boot performance issue (6 - 8 seconds) reported by customer inside BIOS ACPI _OSC method [HSD-ES][2006614580]: Legacy Network Device Boot Order still boots after disabling Update ucode 0000003a for HSX, 0b000020 for BDW ================================================================================ R0021 ================================================================================ Rename BIOS ID from D0187 to R0021 ================================================================================ D0192 ================================================================================ CCB#1885: [TLP BIOS] Command line mechanism enable/disable clock CCB#1842: Add support for Unigen and Wintec DIMMs in BIOS release candidates CCB#1848: ITK options to tune PCIe TxEq adjustment features to support 3rd party add-in card or riser card [HSD-ES][1209605550]: System fails to throttle the CPU during temperature testing of dual 1100W Power Supplies [HSD-ES][2103616038]: [BDW] The Dedicated Management LAN Configuration field can be edited when set IPv6 Source of this field is set to Auto. [HSD-ES][2103616035]: [BDW] The BMC User name can set to unmatched EPS. ================================================================================ D0194 ================================================================================ [HSD-ES][1504474611]: [BDW] No DIMM Disabled error log for the DIMM slot in which the SPD-failed DIMM is installed CCB#1919: [Grantley]To add [Onboard VGA Always On] BIOS ITK/Setup option to support new GPGPU usage model ================================================================================ D0199 ================================================================================ [HSD-ES][1504488116]: [BDW] The disabled boot device will be changed to available when system retries non-EFI-based boot options [HSD-ES][1504483658]: CPU configuration lock bit is not set with default Setup setting [HSD-ES][1504437958]: [SDLS4]REACT-2017-1-OpenSSL upgrade for security vulnerability ================================================================================ R0022 ================================================================================ Rename BIOS ID from D0199 to R0022 ================================================================================ D0222 ================================================================================ [HSD-ES][2006649625]: [Taylor Pass][Grantley]BIOS is not able to identify a Viking NVDIMM module during RMT testing. [HSD-ES][1504522226]: [Grantley] System can't boot when bad memory DIMM is inserted into system, expect to isolate and continue to boot [HSD-ES][1504535349]: [BDW] The warning message is incorrect when set AdminUser PWD the same. Update RC code to V4.3.0 [HSD-ES][2006666280]: The BIOS Setup Bifurcation option does not work for two x8 devices on Riser Slot 2 CCB#1950: Customer asks for change SMBIOS family field in BIOS with ITK Update ucode 0b000021 for BDW ================================================================================ D0227 ================================================================================ [HSD-ES][1504576044]: System Boot Timeout function not working if enable Power On Password [HSD-ES][1504570452]: [BDW]Run chipsec module "python chipsec_main.py -v -m tools.sw_seq" and "python chipsec_main.py -v -m tools.spi_wrsdis" return failed [HSD-ES][2103619426]: [TLP] Serial Port should belong internal device not external device in SMBIOS Type8 ================================================================================ D0228 ================================================================================ Update HSX ucode to 0000003b, BDW ucode to 0b000025 [HSD-ES][1504648192] FRB watchdog in BIOS does not work when memory initialization failure happens on S2600TP motherboard ================================================================================ D0229 ================================================================================ Fixed FIT table 2K alignment issue. [HSD-ES][1504535349]: [BDW] SUT will hang up during POST on BIOS R0023 when power on with single QK7S CPU. ================================================================================ D0231 ================================================================================ Update HSX ucode to 0000003c, BDW ucode to 0b00002a Update the copyright to 2018 ================================================================================ D0232 ================================================================================ Update BDW ucode to 0b00002b ================================================================================ R0023 ================================================================================ Rename BIOS ID from D0232 to R0023 ================================================================================ R0024 ================================================================================ Roll back BDW ucode to 0b00002a ================================================================================ D0238 ================================================================================ [HSD-ES][1504682207]: Unable to successfully boot after disabling PXE port with ITK [HSD-ES][2006712013]: Unable to boot PXE using Intel X710 10 GbE NICs on Legacy Mode Update ME to 03.01.03.050 CCB#2226 - [Grantely] Add Infineon FW update capability support in BIOS and UEFI application Update microcode BDW to 0b00002c ================================================================================ D0244 ================================================================================ Sync up PSIRI-BIOS-2018-002 changes from Grantley CRB Update the Security Rvision:0909 [HSD-ES][2006705402][S2600KP][Windows Server 2012 R2] ACPI_BIOS_ERROR BSOD [HSD-ES][1506126070] Some items failed when running command "chipsec_main.py" Update microcode BDW to 0b00002e Update microcode HSW to 0000003d Update RC V4.4 ================================================================================ R0027 ================================================================================ Change the BIOS ID from D0244 to R0027