This release note and the software that accompanies it are copyright (c) 2004, Intel Corporation, and may only be installed and used in accordance with the license that accompanies the software.

This package is designed for controllers using software stack 1 (SRCZCR, SRCU42L, SRCU32, SRCS14), it is not compatible with the SRCU42X, SRCS16, or later controllers.
You can verify compatability on the RAID controller's driver page at http://support.intel.com.

OS supported = Unixware 7.1.3

This download is packaged as a zip file and can be unzipped using a variety of compatible zip programs.

Attention!
===========
Extract package contents to a user specified location such as = a:\

Versions:
=========
Driver = 2.36.0.0
Storcon = 2.16.6
SRCD = 1.13.1

Contents
=========
The following files are included in the UW713_drv.zip:

Name				DAte		Size		Description
srcd.pkg			1/28/04		100KB 		management service
storcon.pkg			2/12/04		757KB		management utility
unixw7.img			2/12/04		1440KB		Installation diskette image
Web Licence.rtf			06/27/03	13KB		License
UW713_dvr_readme.txt		2/20/04		2KB		This file


Installation Instructions:
==========================
Extract the diskette image file to a floppy diskette using the rawrite utility, then:
1.	Boot to CD #1 – splash screen will appear
2.	When prompted, select “Proceed with installation in English” and press <ENTER>
3.	At the Welcome screen, press <F10> to continue.
4.	Choose “Americas” (default) to select zone. <F10>
5.	Choose locale “C (English)” (default). <F10>
6.	Keyboard, choose “United States” (default). <F10>
7.	Enter your license information. (This information can be acquired from your Caldera UnixWare representative). <F10>:
•	License Number:
•	License Code:
•	License Data:

8.	Insert driver disk.
•	If you need to load additional storage drivers:
a.	Insert the first HBA diskette and press the up-arrow to select “Install HBA diskette”. Press <F10>
b.	The driver is loaded, and you are prompted to load additional HBA diskettes. If you need to, repeat the previous steps until all the necessary drivers are loaded. Otherwise, press <F10> to “Proceed with installation”.
9.	The drivers are loaded.
10.	Proceed with the normal installation.




*Other names and brands may be claimed as the property of others.