Flash Update/Recovery Utility
FUU_FRU.EXE
06/30/2000

This software is copyrighted, and may only be installed and used in accordance with the license that accompanies it.

These files support the following Intel products:
*Intel Server RAID Controller U2-1 (SRCU21)
*Intel Integrated RAID Controller Reference Design SMU22R
*Intel Integrated RAID Controller KMU21

Contents
========
This package contains the flash update/recovery utilities. The following files are included:

FUU.EXE		version 3.07
FRU.EXE		version 4.04
DIT.EXE		version 3.07
FINDDISK.EXE
HIMEM.SYS
VDISK.SYS
AUTOEXEC.BAT
CONFIG.SYS
flashio/DOS4GW.EXE
flashio/FRU.BAT
flashio/FRU.EXE
flashio/REBOOT.COM
flashio/RMFLASH.EXE


Installation
============
The Flash Update Utility is used to update the firmware of the RAID adapter but requires that the firmware already on the RAID adapter be in a functional state. The Flash Recovery Utility is used to update the firmware of a non-functional RAID adapter. For the Flash Recovery Utility to work, the RAID adapter must be placed into update mode, normally accomplished by setting a jumper on the RAID adapter. Refer to the User's Manual for more information on setting the RAID adapter into update mode.

Both utilities require a separate diskette for the RAID adapter firmware, in a file called RAID.BIN. This file must be downloaded separately.

1. Create a bootable, formatted DOS floppy. This can be accomplished from a Microsoft Windows 95/98 machine by typing "format a: /s" from a command prompt.
2. Double-click on the file FUU_FRU.EXE. When prompted for a location to expand the files to, be sure to select an EMPTY directory. The directory C:\FUU_FRU is selected by default.
3. Copy the extracted files to the bootable, formatted floppy disk.
4. If you intend to use the Flash Recovery Utility, you will need to turn off the system with the RAID adapter, place the RAID adapter in update mode by setting the I/O Processor in reset. If the RAID adapter is currently funtional, you should be able to use the Flash Update Utility without putting the RAID adapter in update mode.
5. Boot the system with the Flash Update/Recovery Utility diskette.
6. Select the appropriate option, Flash Update or Flash Recovery, based upon the status of the RAID adapter from step 4.
7. When prompted, insert the RAID adapter firmware diskette.
8. Reboot the system when the update or recovery process is completed.

NOTE: If you receive an ERROR CODE 16 message when using the Flash Recovery Utility, it is likely that the RAID adapter is not in update mode. Either correctly place the adapter in reset mode, or use the Flash Update utility.


Fixes/Update
============
06/30/2000 

The FRU (Flash Recovery Utility) version 4.04 has been updated in order to allow flashing through bridges.

*Third-party trademarks are the property of their respective owners.