Copyright Intel Corporation 2002
Intel(R) Server Control v2.x & 3.x

Summary: 

These drivers are only necessary if Intel Server Control v2.x or v3.x has been installed 
on the server system.

These are Microsoft* Windows* 2000 compatible drivers and are WHQL certified.

Two drivers are part of this download package.  They include IMBDRV.SYS and PCICONF.SYS.
The IMBDRV.SYS  is used by Intel Server Control for monitoring the health of the server
system.  The PCICONF.SYS is only needed on server systems that support PCI Hot Plug slots
and is used to report changes in card slot status.

*****Updating your drivers to show a digital signature*****

1) Create a subdirectory or flopply and Copy all driver files (IMBDRV.SYS, IMBDRV.CAT, 
	IMBDRV.INF, PCICON.SYS, PCI.CONF.INF, and PCICONF.CAT) to that location.

2)  On the Windows* 2000 desktop, right click on MY COMPUTER.
3)  Click on Properties.
4)  Click on Hardware tab.
5)  Click on Device Manager button.
6)  Click the "+" under  "System Devices", the IMB DRV driver should be listed
	Note:  If you have IMB Drivers listed under "Other Devices" then right click 
               uninstall them.  A system "reset" will then be necessary.  Don't uninstall
               IMB drivers listed under "System Devices."
7)  Right click "IMB Driver V3.0"
8)  Click on Properties
9)  Click on Driver tab
10) Click UPDATE DRIVER button
11) Upgrade Device Driver Wizard appears. Click NEXT button
12) Next window asks "What do you want the wizard to do?", choose
	"Display a list of known drivers for this device so that I can choose a specific driver"
13) Click NEXT
14) In "Select a Device Driver", Click "HAVE DISK"
15) Browse for the directory/drive you copied all the driver files to.
16) Click on IMBDRV
17) Click OPEN
18) Click OK (to install from disk)
	With IMBDRV highlighted, Click NEXT
19) Click NEXT to start Device Driver Installation
20) Once updated click FINISH

Note: You should see "Digital Signer" as "Microsoft Hardware Compatibility Publ" 
(This can be viewed under Device Manager | System Devices | Right click on properties | 
 select the "driver" tab and view the "Digital Signer" content.)

Repeat steps for "PCI Config driver V3.0" (if installed).
	
You will need to restart the computer once you have updated all drivers.


* Other names and brands may be claimed as the property of others.