================================================================================
                            BIOS R0042
================================================================================

- Fixed: The system may hang after console redirection is enabled in BIOS setup.

Other:

Intel(R) QPI Reference Code Version update to version 1.75.


===============================================================================
                         BMC 43  ISSUES FIXED
===============================================================================
00.43
    - Processor thermal trip bit is not cleared after manual rearm 
    - Spelling error for 'Both' compression option help in KVM 
    - DHCP Hostname not set to NULL when it is directly set from block 2 
    - Set LAN Configuration Parameter command return invalid completion code 	for param  
    - Execute a Platform Event Message with one less byte result returns 0x00. 
    - System boot to PXE and boot flag valid bit is not cleared after reset
    - Get ACPI power state return Undefined when system power off (S5-Soft 	off). 
    - Set PEF to trigger a PowerCycle action, waited for 30s power didn't OFF
    - Full data is returned for Get BIOS ID command even when the offset is 	not 0. 
    - The Thermal Trip status didn't be cleared by Re-arm Sensor Events 	Command
    - The response data is wrong when executing Platform Event Message
	  command with one less bye.
    - Removing a fan from redundant fan system does not cause fans to boost
    - Fan do not increase fan speed when two redunant fans are removed
    - Get ACPI power state" command response is incorrect when press power
	  button to turn off SUT with BMC 37
    - Some PEF actions are not working
    - Debug Console reports I2C failures when accessing IPMB
    - "Platform Event" command should be rejected when the request data is
	  one byte less under BMC 00.38
    - Unexpected behavior of setting and getting LAN configuration parameter
          "BMC-generated ARP control" under BMC 00.38


=============================================================================
                          FRUSDR 18 ISSUES FIXED
=============================================================================
- Proc Status sensors are Auto rearm and should be Manual