SCO UnixWare 7.1 HBA Diskette
UW_HBA.EXE
09/15/2000

This software is copyrighted, and may only be installed and used in accordance with the license that accompanies it.

These files support the following Intel products:
*Intel Server RAID Controller U3-1L Low Profile (SRCU31L)

Contents
========

The UW_HBA.EXE self extracting ZIP file package includes the Host Bus Adapter (HBA) for  for SCO UnixWare 7.1. This is the driver used (only) durring installation of UnixWare 7.1 to a RAID Volume or pass-through drive.  The following files are included in UW_HBA.EXE:

SCO_HBA.EXE	UnixWare 7.1 HBA Diskette Creator
readme.txt  	This file

Installation
============
1. Execute UW_HBA.EXE to extract the files listed above.
2. Run the included executable file (SCO_HBA.EXE) on and Windows NT or Windows ‘9x system to create the UnixWare HBA diskette (requires floppy diskette).
3. Install the UnixWare 7.1 OS using the install instruction provided in UnixWare 7 Installation Guide manual.
4. The UnixWare installation process will prompt you to install a Host Bus Adapter diskette. At that time insert the Unix HBA diskette.

NOTE:  Do NOT install NIS - During the installation of UnixWare, you will be prompted to install the Network Information Services (NIS) package.  When prompted defer the installation of NIS by pressing F8 on the NIS configuration screen.  If you decide at a later time to install NIS, you can do so using the pkgadd(1) command.

Fixes/Update
============
09/15/2000 - This is the first release of these files. 


*Third-party trademarks are the property of their respective owners.