RAID Troubleshooting Utility
RTS.EXE
09/15/2000

This software is copyrighted, and may only be installed and used in accordance with the license that accompanies it.

These files support the following Intel products:
*Intel Server RAID Controller U3-1L Low Profile (SRCU31L)


Contents
========

The ARCU.EXE self extracting ZIP file package includes the RAID Troubleshooting utilities. The following files are included in RTS.EXE:

RAIDIAG.EXE		RAID Troubleshooting Utility Diskette Creator
readme.txt  		This file

The following files are included in the self-extracting disk image (RAIDIAG.EXE):

 AUTOEXEC.BAT
 cfg.htm
 CONFIG.SYS
 copying
 DIT.EXE
 iopsetup.exe
 main.htm
 SAC.PDF

The version of this RAID Troubleshooting Utility is SAC 1.1

Installation/Use
================
1. Execute ARCU.EXE to extract the files listed above.
2. Run the included executable file (RAIDIAG.EXE) on and Windows NT or Windows ‘9x system to create the RAID Troubleshooting Utility Diskette (requires floppy diskette).
3. Power down the system on which the RAID Troubleshooting Utility will be run.
4. Boot the system up to the RAID Troubleshooting Utility diskette.
5. Select "Reconfigure IOP Subsystem"
6. Select "Configure It"
7. Select "Proceed"
8. Select "RAID Storage Console"
9. Select "Continue" Twice
10. Begin Troubleshooting and/or configuring the RAID subsystem
11. Press "q" to Quit when done.

Fixes/Update
============
09/15/2000 - This is the first release of these files. 


*Third-party trademarks are the property of their respective owners.