This readme is for both the NT4_MP.EXE and the NT4_OSM.EXE for the Intel(R) Server RAID
Controller U3-1 (SRCU31), Global Build 4.14.



Windows NT 4.0 I2O SCSI Miniport Driver
NT4_MP.EXE
06/30/2000

This software is copyrighted, and may only be installed and used in accordance with the license that accompanies it.

These files support the following Intel products:
*Intel Server RAID Controller U3-1 (SRCU31)
*Intel Integrated RAID Controller BNU31

Contents
========
This package contains an I2O SCSI Miniport driver for Microsoft Windows NT 4.0. The following files are included:

SCSIMP.EXE	06/09/00	 21,668 	Windows NT4.0 SCSI Miniport Diskette Creator
readme.txt  					This file

The following files are included in the self-extracting disk image (SCSIMP.EXE):

i2omp.sys	11/01/99	version 4.0.1381.1
iirmptag	04/07/00
oemsetup.inf	04/20/00
txtsetup.oem	04/20/00

Installation
============
The I2O SCSI Miniport is used during the Microsoft Windows NT 4.0 setup process to allow installation of the OS to a drive or volume connected to an I2O RAID controller.

1. Download the I2O SCSI Miniport driver package called NT4_MP.EXE and save it to disk.
2. Double-click on the file NT4_MP.EXE and extract the files to an EMPTY directory. The directory C:\NT4_MP is selected by default. 
3. Run the included executable file (SCSIMP.EXE) on and Windows NT or Windows ‘9x system to create the Windows NT4.0 SCSI Miniport Diskette (requires floppy diskette).
4. When running NT Setup from a bootable CD, press F6 while as soon as the blue setup screen appears. If running setup from Windows NT Installation floppy diskettes, there is no need to press F6.
5. After device detection has completed, press S to select additional storage devices, then select Other.
6. Insert the I2O SCSI Miniport driver diskette, select the I2O Miniport driver, and continue with NT installation.

NOTE: This driver is only to be used for the NT installation process. Once NT is installed, you should install the complete NT 4 OSM package.


Fixes/Update
============
06/30/2000 - This is the first release of these files. 



===========================================================================================


Windows NT 4.0 OSM's
NT4_OSM.EXE
06/30/2000

This software is copyrighted, and may only be installed and used in accordance with the license that accompanies it.

These files support the following Intel products:
*Intel Server RAID Controller U3-1 (SRCU31)
*Intel Integrated RAID Controller BNU31

*** Caution ***
===============
Do NOT install this update in systems that contain two SRCU31 controllers (two cards in the same system).  See the specification update for errata details.  This warning does not apply to systems with only one SRCU31 controller.

Contents
========
This package contains Random Block Storage and SCSI Peripheral class I2O OS Service Modules (OSM's) for Microsoft Windows NT 4.0. The following files are included:
iopbus.sys	version 1.50-69d
i2oexec.sys	version 4.0.1381.1
i2odisk.sys	version 4.0.1381.1
i2ofilt.sys	version 4.0.1381.1
i2oscsi.sys	version 4.0.1381.1
readme.txt	this file

Installation
============
1. Download the OSM installation package called NT4_OSM.EXE and save it to disk.
2. Double-click on the file NT4_OSM.EXE. This will extract the files to a temporary directory and run setup.
3. Read and accept the license agreement.
4. The installer will check for installed version of the device drivers listed above and will automatically update older versions.
5. You will need to reboot the system for the new drivers to take effect.

Fixes/Update
============
06/30/2000 - This is the first release of these files. 

*Third-party trademarks are property of their respective owners.