Novell NetWare 4.2 and 5.0 OSM's and Utilities
419_NW.EXE
06/30/2000 

This software is copyrighted, and may only be installed and used in accordance with the license that accompanies it. 

These files support the following Intel products: 

Intel Server RAID Controller U3-1 (SRCU31) 
Intel Integrated RAID Controller BNU31 
Contents
======== 
The NW.EXE self extracting ZIP file package includes RAID Monitor, DMI Component Instrumentation, SMNP Extention Agent, Storage Console (I2O Configuration) and Device Drivers (OSM's) for Novell NetWare 4.2 and 5.0. The following files are included in NW.EXE: 

NW_DISK.EXE 06/09/00 973,187 Novell Drivers and Utilities Diskette Creator
readme.txt This file 

The following files are incluced on the Novell Drivers and Utilities Diskette: 

(a:\mgmt):
raidxa.nlm 06/09/00 15,713 Version 4.06
raidmon.nlm 06/09/00 9,630 Version 4.06
raidci.nlm 06/09/00 17,525 Version 4.11


(a:\drivers):
bkstrosm.ham 04/19/00 11,893 version 1.18a
bkstrosm.ddi 09/28/99 2,480 version 1.11
i2opci.nlm 11/08/99 10,564 version 1.09
i2opci.ddi 11/09/99 2,410 version 1.04
iopx.nlm 02/16/00 94,057 version 1.27


Updating existing NetWare drivers (OSM's)
=========================================


Execute NW.EXE to extract the files listed above. 
Run the included executable file (NW_DISK.EXE) on and Windows NT, DOS, or Windows ‘9x system to create the NetWare Drivers diskette (requires floppy diskette). 
From the NetWare Server, run NWConfig 
Select "Product Options" from the "Configuration Options" menu (main NWConfig screen) 
Select "Install product not listed" from the "Other Installation Actions" menu 
Insert the floppy diskette (created in step #2) into the server and press to continue 
The program will then display all loadable "file groups". Select the BKSTROSM.HAM file group by pressing enter on the "BKSTROSM.HAM (1MB)" line to make an "X" in its box. 
Press F10 to install the "BKSTROSM.HAM" file group. A status bar will show progress. 
When the message that states "RAID Software installation is complete!" is displayed press to continue. 
Exit NWConfig and reboot the server. 
Installing drivers (OSM's) durring NetWare installation (first time):
===================================================================
NetWare 4.2:
------------

Run the included executable file (NW_DISK.EXE) on and Windows NT, DOS, or Windows ‘9x system to create the NetWare Drivers diskette. 
Begin the installation of NetWare 4.2. Select "Custom installation of NetWare 4.2" when prompted. 
When the device driver installation screen appears, choose "Select additional or modify selected Disk/LAN drivers". 
Choose "Select an additional driver". Hit Insert to install an unlisted driver. 
Make sure that the NetWare drivers diskette is in the floppy drive and hit Enter. 
Select "BKSTROSM.HAM" from the list. 
Continue with the NetWare installation as normal by following the screen prompts. 
NetWare 5.0:
------------

Run the included excitable file (NW_DISK.EXE) on and Windows NT, DOS, or Windows ‘9x system to create the NetWare Drivers diskette. 
Begin the NetWare 5.0 installation. The NetWare Install will eventually load a Welcome screen, asking you to verify the startup directory (C:\NWSERVER). Hit Alt F10 to exit the installation. At the console, type "Down". The installation exits to the boot drive prompt. 
Insert the NetWare drivers diskette into the A: drive. If your boot drive is C:, then run NWUPDATE.BAT. If your boot drive is other than C:, then create an NWUPDATE subdirectory and copy all the files from A:\DRIVERS into the NWUPDATE subdirectory. 
Remove the diskette from the A: drive and reboot the server. After booting you will be asked to Accept the License Agreement. Do so and then select "Continue with Existing Partition". 
When prompted, Select the "Block Storage OSM". 
Continue with the NetWare installation as normal by following the screen prompts. 
Adding or Updating RAID Utilities
=================================

Execute NW.EXE to extract the files listed above. 
Run the included executable file (NW_DISK.EXE) on and Windows NT or Windows ‘9x system to create the NetWare Utilities diskette (requires floppy diskette). 
From the NetWare Server, run NWConfig. 
Select "Product Options" from the "Configuration Options" menu (main NWConfig screen). 
Select "Install product not listed" from the "Other Installation Actions" menu. 
Insert the floppy diskette (created in step #2) into the server and press to continue. 
The program will then display all loadable "file groups". Select all roups by pressing enter on to make an "X" in all boxes (or select only those items that you wish to install). 
Press F10 to install all file groups. A status bar will show progress. 
When the message that states "RAID Software installation is complete!" is displayed press to continue. 
Exit NWConfig and reboot the server. 
Fixes/Update
============
06/30/2000 - This is the first release of these files. 

*Third-party trademarks are the property of their respective owners.